b130 keurig manual

The Keurig B130 is a commercial-grade single-serve coffee brewer designed for office and commercial use. It features a large 90-ounce water reservoir, programmable auto on/off, removable drip tray, descaling alert, and compatibility with all K-Cup pods. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Brewing Process 7. Maintenance & Cleaning 8. Descaling Procedure 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Large water reservoir, K-Cup pod holder, control panel, removable drip tray, power button, brew size selector.

Feature	Description
Water Reservoir	90-ounce capacity with easy-fill design
Brew Sizes	6oz, 8oz, 10oz programmable options
Control Panel	LCD display with intuitive buttons
Auto On/Off	Programmable start/stop times
Removable Drip Tray	Accommodates travel mugs up to 7.2 inches
Descaling Alert	Automatic reminder for maintenance
Power Button	Turns brewer on/off
Brew Button	Initiates brewing process
Brew Size Selector	Choose cup size preference
Water Filter	Optional charcoal filtration system

Installation

Unpack and inspect contents. Place on clean, level surface.

Remove packaging materials and tape from all components.
Place brewer on stable, level counter away from heat sources.
Fill water reservoir with fresh cold water and reinstall.
Plug into grounded electrical outlet.
Prime the system by running water through without a pod.

WARNING! Do not use without water in reservoir. Ensure proper ventilation around brewer.

First-Time Setup

Power on brewer; follow initial setup procedure.

Prime the system: Press power button, place mug, press brew without K-Cup.
Set auto on/off: Use control panel to program desired times.
Set brew size: Select preferred cup size (6oz, 8oz, 10oz).
Install water filter: If using optional filter system.

CAUTION! First brew may contain manufacturing residues - discard first few cups.

Specifications

Dimensions: 13.5" W x 16.5" H x 11.5" D
Water Reservoir: 90 ounces capacity
Brew Sizes: 6oz, 8oz, 10oz programmable
Power: 120V AC, 60Hz, 1470W
Weight: 12.5 pounds
Compatibility: All K-Cup pod varieties
Warranty: 1-year commercial limited warranty
Cord Length: 30 inches

Controls and Settings

Access settings via control panel buttons and LCD display.

Control Panel: POWER, BREW, BREW SIZE, AUTO ON/OFF, MENU.

Settings: Brew temperature (192°F default), auto off timing (2hr default), brew strength, water filter indicator, descaling reminder. Menu navigation: Use MENU button to scroll through options, BREW button to select.

Brewing Process

Simple one-cup brewing with K-Cup pods.

Lift handle and insert K-Cup pod.
Close handle firmly until it snaps shut.
Place mug on drip tray (up to 7.2" height).
Select brew size if different from default.
Press BREW button to start cycle.
Brewing completes in approximately 60 seconds.
Lift handle to eject used pod.

Tip: For stronger coffee, use smaller brew size with same pod.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Daily: Wipe exterior with damp cloth.
Weekly: Clean water reservoir and drip tray.
Monthly: Descale with Keurig descaling solution.
As needed: Replace water filter every 2 months.

CAUTION! Unplug before cleaning. Never immerse brewer in water.

Descaling Procedure

Required when descaling alert appears (approximately every 3-6 months).

Empty water reservoir and fill with descaling solution mixed with water.
Place large mug or container on drip tray.
Press MENU and navigate to descale mode.
Press BREW to start descaling cycle.
Repeat rinse cycles with fresh water until solution is gone.
Brew 2-3 cups of plain water to complete rinse.

WARNING! Use only Keurig descaling solution. Do not use vinegar.

Regulatory Information

UL listed; FCC Part 15 compliant. Copyright © Keurig Green Mountain, Inc. For support, visit www.keurig.com or contact 1-866-901-2739. This commercial brewer is designed for office and workplace environments.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Brewer won't power on	Power connection	Check outlet; ensure power cord is plugged in securely.
No water flow	Empty reservoir/air lock	Refill reservoir; prime system; check for clogs.
Weak coffee	Brew size/need descaling	Use smaller brew size; descale brewer.
Leaking water	Loose connections	Check reservoir seating; inspect water lines.
Pod not punctured	Handle not closed	Ensure handle closes completely until snap.

Reset: Unplug for 2 minutes then restart.

Service: 1-866-901-2739; www.keurig.com