b145 keurig manual

The Keurig B145 is a single-serve coffee brewing system designed for home and office use, featuring K-Cup pod compatibility, multiple brew sizes, removable water reservoir, descaling function, programmable auto-off, and energy-saving modes. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Brew chamber, Water reservoir, Control panel, Drip tray, Power button, Brew size selector.

Feature	Description
Brew Sizes	6oz, 8oz, 10oz cup options
Water Reservoir	48oz removable reservoir with handle
Control Panel	LCD display with touch buttons
Brew Temperature	192°F optimal brewing temperature
Auto-off	Programmable 2-hour auto shut-off
Descale Indicator	Automatic reminder for descaling
Energy Saver	Low-power standby mode
K-Cup Compatibility	Works with all Keurig K-Cup pods
Drip Tray	Adjustable height for various cup sizes
Power Requirements	120V AC, 60Hz, 1470W

Installation

Unpack and inspect contents. Place on clean, level surface away from heat sources.

1. Remove packaging materials and stickers from all components
2. Place brewer on stable, level countertop
3. Remove water reservoir and rinse thoroughly with clean water
4. Fill reservoir with fresh cold water and reinstall
5. Plug power cord into grounded electrical outlet
6. Prime the brewing system by running water through without K-Cup

WARNING! Do not use without water. Ensure brewer is on stable surface to prevent tipping.

First-Time Setup

Power on brewer; follow initial setup prompts.

1. Plug in brewer: Power light will illuminate
2. Prime system: Lift and close handle to start priming cycle
3. Select language: Choose preferred display language
4. Set time: Configure clock if applicable
5. Program auto-off: Set desired auto shut-off time (2 hours default)
6. Brew first cup: Insert K-Cup and select brew size

CAUTION! First few brews may produce unusual odor - this is normal and will dissipate.

Specifications

• Dimensions: 13.5" H x 10.2" W x 13.5" D
• Water Reservoir: 48oz capacity
• Brew Sizes: 6oz, 8oz, 10oz
• Brew Time: Under 1 minute
• Power: 120V AC, 60Hz, 1470W
• Weight: 8.5 lbs
• Warranty: 1 year limited warranty
• Compatibility: All Keurig K-Cup pods
• Temperature: 192°F brewing temperature
• Display: LCD with backlight

Controls and Settings

Access settings via control panel buttons. Power: Turns brewer on/off. Brew: Starts brewing cycle.

Control Panel: POWER, BREW, 6oz, 8oz, 10oz, MENU, SELECT, AUTO OFF, DESCALING

Settings: Auto-off timing (30 min, 1 hr, 2 hr, 4 hr), Temperature adjustment (Hotter/Warmer), Brew strength (Strong/Regular), Language selection, Factory reset. Maintenance: Descaling mode, Water filter reminder, Clean cycle.

Brewing Process

Supports all Keurig K-Cup varieties including coffee, tea, hot cocoa.

1. Lift handle to open brew chamber
2. Insert K-Cup pod into chamber
3. Close handle firmly until it clicks
4. Place mug on drip tray
5. Select desired brew size (6oz, 8oz, 10oz)
6. Press BREW button to start cycle
7. Wait for brewing to complete (approx. 45-60 seconds)
8. Remove mug and enjoy

WARNING! Do not open brew chamber during brewing cycle. Hot liquid may cause burns.

Maintenance & Cleaning

Regular cleaning ensures optimal performance and beverage quality.

1. Daily: Wipe exterior with damp cloth
2. Weekly: Clean drip tray and removable parts
3. Monthly: Run water-only brew cycles to clean internal system
4. As needed: Replace water filter every 2 months or 60 tank refills
5. Descale: When indicator light appears or every 3-6 months

CAUTION! Unplug brewer before cleaning. Do not immerse in water.

Descaling Procedure

Required every 3-6 months to remove mineral buildup.

1. Empty water reservoir
2. Mix Keurig descaling solution with full reservoir of water
3. Place large mug (at least 16oz) on drip tray
4. Enter descaling mode: Hold 8oz and 10oz buttons for 3 seconds
5. Follow on-screen prompts to complete descaling cycle
6. Rinse system with 2-3 reservoirs of clean water
7. Reset descale indicator when complete

IMPORTANT! Use only Keurig descaling solution. Do not use vinegar.

Regulatory Information

UL listed; FCC Part 15 compliant. Copyright © Keurig Green Mountain, Inc. For support, visit www.keurig.com or contact 1-866-901-2739. This device complies with part 15 of the FCC Rules.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Brewer won't power on	Power connection	Check power outlet; ensure cord is firmly plugged in
No water flow	Clogged needle/air lock	Descale brewer; check water reservoir placement
Weak coffee	Mineral buildup	Descale system; check water filter
Leaking water	Loose connections	Ensure reservoir seated properly; check seals
Error messages	System errors	Unplug for 2 minutes; restart; check manual codes
Descale light on	Mineral buildup	Perform descaling procedure immediately

Reset: Unplug for 2 minutes then restart. Factory reset available in menu.

Service: 1-866-901-2739; www.keurig.com