B150 Keurig Manual

The B150 Keurig is a commercial-grade single-serve coffee brewer designed for office and light commercial use, featuring programmable settings, multiple cup sizes, energy-saving auto-off function, removable drip tray, large water reservoir, descaling alert, and compatibility with all K-Cup pods. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Brew chamber, Water reservoir, Control panel, Drip tray, Power cord, K-Cup pod holder.

Feature	Description
Brew Sizes	6oz, 8oz, 10oz programmable options
Water Reservoir	Removable 60oz capacity
Control Panel	LCD display with button controls
Auto Off	Programmable 2-hour energy saving mode
Drip Tray	Removable and adjustable for mug height
Brew Temperature	192°F optimal brewing temperature
Descaling Alert	Automatic reminder when descaling needed
Power	120V AC, 1500W heating element
Dimensions	13.2" W x 10.5" D x 13.2" H
Weight	8.8 lbs

Installation & Setup

Unpack and inspect contents. Place on stable, level surface.

1. Remove packaging materials and tape from all components.
2. Wash removable parts: Reservoir and drip tray with warm soapy water.
3. Fill reservoir with fresh cold water and place back on unit.
4. Plug into grounded 120V AC outlet.
5. Prime the system by running water through without a K-Cup pod.

WARNING! Use only with grounded outlet. Do not immerse in water. Keep away from heat sources.

First-Time Use

Power on brewer; follow initial setup procedure.

1. Press POWER button to turn unit on.
2. Allow brewer to heat up (approximately 3 minutes).
3. Program brew sizes: Use BREW SIZE buttons to set preferred volumes.
4. Set auto-off time: Press and hold AUTO OFF to select 2-hour setting.
5. Insert K-Cup pod and brew first cup to prime system.

CAUTION! First few brews may contain manufacturing residues. Discard first 2-3 brews.

Specifications

• Model: B150 Commercial Series
• Brew Sizes: 6oz, 8oz, 10oz (programmable)
• Water Reservoir: 60oz removable
• Power: 120V AC, 1500W, 60Hz
• Brew Time: Under 1 minute per cup
• Temperature: 192°F brewing temperature
• Dimensions: 13.2" W x 10.5" D x 13.2" H
• Weight: 8.8 lbs
• Compatibility: All K-Cup pod varieties
• Warranty: 1-year limited commercial warranty

Controls and Settings

Control Panel: POWER, BREW, BREW SIZE (6oz/8oz/10oz), AUTO OFF, ADD WATER indicator.

Programming: Press and hold BREW SIZE to program default sizes. Press and hold AUTO OFF to set energy saving timer.

Indicator Lights: POWER (green when on), ADD WATER (red when reservoir empty or low), READY (green when heated).

Brewing Operation

Daily brewing procedure for optimal performance.

1. Ensure brewer is powered on and READY light is illuminated.
2. Lift handle and insert K-Cup pod into brew chamber.
3. Close handle firmly until it clicks into place.
4. Place mug on drip tray.
5. Press BREW button or desired BREW SIZE button.
6. Brewing completes automatically.
7. Remove mug and enjoy.

Tip: Use filtered water for better tasting coffee and reduced mineral buildup.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

1. Daily: Wipe exterior with damp cloth.
2. Weekly: Remove and wash drip tray and reservoir.
3. Monthly: Clean brew needle with paper clip to remove coffee grounds.
4. As needed: Descale when ADD WATER light flashes red.

CAUTION! Unplug before cleaning. Never use abrasive cleaners or immerse in water.

Descaling Procedure

Required every 3-6 months depending on water hardness.

1. Prepare descaling solution: Commercial descaler or white vinegar/water mix.
2. Fill reservoir with descaling solution.
3. Place large container on drip tray (at least 40oz capacity).
4. Press and hold 10oz and 8oz buttons for 3 seconds to enter descale mode.
5. Press BREW to start descaling cycle.
6. Repeat brewing until reservoir is empty.
7. Rinse thoroughly by running 2-3 reservoirs of clean water through system.

WARNING! Follow descaling instructions carefully to avoid damage.

Regulatory Information

UL listed; FCC Part 15 compliant. Manufactured for commercial use. Copyright © Keurig Green Mountain, Inc. For support, visit www.keurig.com or contact 1-866-901-BREW (2739).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Brewer won't power on	Power source/outlet	Check power cord connection; test outlet; ensure switch is on.
No water flow	Empty reservoir/clog	Fill reservoir; check for clogs in needle; descale if needed.
Weak coffee	Mineral buildup	Descale brewer; use filtered water.
Leaking water	Seals/reservoir	Check reservoir placement; inspect seals for damage.
Error lights	Various issues	Unplug for 2 minutes; restart; contact service if persistent.

Reset: Unplug for 2 minutes to reset electronic controls.

Service: 1-866-901-BREW (2739); www.keurig.com