cuisinart keurig brewed single serve brewing system manual

The Cuisinart Keurig Brewed Single Serve Brewing System is a premium coffee maker designed for convenient single-serve brewing using K-Cup pods. This system features multiple cup size options, programmable settings, auto on/off functionality, removable water reservoir, descaling alert, and compatibility with all Keurig K-Cup pods. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Brewing unit, Water reservoir, Drip tray, Control panel, K-Cup pod holder, Power cord.

Installation & Setup

Unpack and inspect all components. Place on clean, dry, stable surface.

1. Remove packaging materials and stickers from all parts.
2. Wash removable water reservoir with warm, soapy water and rinse thoroughly.
3. Place drip tray in position and ensure it's properly seated.
4. Fill water reservoir with fresh cold water and reinstall.
5. Plug into grounded electrical outlet.

WARNING! Do not use without water in reservoir. Keep away from heat sources and moisture.

First-Time Use

Prime the brewing system before first use.

1. Press POWER button to turn on brewer.
2. Lift and close brewer handle without K-Cup pod to flush system.
3. Place mug on drip tray.
4. Press BREW button to run water through system (repeat 2-3 times).
5. System is now ready for brewing with K-Cup pods.

CAUTION! Use only Keurig-approved K-Cup pods. Do not use ground coffee or loose tea.

Specifications

• Dimensions: 10.5" W x 13.2" H x 12.5" D
• Water Reservoir: 48oz removable capacity
• Brew Sizes: 6oz, 8oz, 10oz
• Brew Time: Under 1 minute
• Power: 120V AC, 60Hz, 1470W
• Weight: 8.5 lbs
• Compatibility: All Keurig K-Cup pods
• Warranty: 3-year limited warranty
• Materials: BPA-free plastic components

Controls and Settings

Control Panel: POWER, BREW, CUP SIZE (6oz/8oz/10oz), BREW STRENGTH, HOT WATER.

Programming: Auto on/off can be set in settings menu. Brew strength adjusts coffee intensity. Cup size selector controls water volume.

Settings: Auto off (0-4 hours), Brew temperature (default 192°F), Brew strength (Regular/Strong), Descaling mode, Factory reset.

Brewing Process

Step-by-step brewing instructions:

1. Press POWER button to turn on brewer (wait for ready light).
2. Lift brewer handle and insert K-Cup pod.
3. Close handle firmly until it clicks into place.
4. Place mug on drip tray (adjust if necessary).
5. Select cup size (6oz, 8oz, or 10oz).
6. Press BREW button to start brewing.
7. Brewing completes automatically.
8. Lift handle to remove used K-Cup pod.

Tip: For stronger coffee, use BREW STRENGTH button or select smaller cup size.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

1. Daily: Wipe exterior with damp cloth.
2. Weekly: Clean water reservoir and drip tray.
3. Monthly: Descale if alert light appears.
4. As needed: Replace water filter (if equipped).

CAUTION! Unplug before cleaning. Do not immerse in water. Use only mild detergent.

Descaling Procedure

Perform when descaling alert appears (approximately every 3-6 months).

1. Prepare descaling solution as directed on package.
2. Pour solution into empty water reservoir.
3. Place large mug or container on drip tray.
4. Press and hold 6oz and 10oz buttons for 3 seconds to enter descale mode.
5. Press BREW button to start descaling cycle.
6. Repeat brewing until reservoir is empty.
7. Rinse reservoir thoroughly and fill with fresh water.
8. Run 2-3 brewing cycles with fresh water to rinse system.

WARNING! Use only Keurig-approved descaling solution.

Regulatory Information

UL listed; complies with FCC Part 15. Copyright © Cuisinart. For support, visit www.cuisinart.com or contact 1-800-211-9604. This appliance is for household use only. Save these instructions for future reference.

Troubleshooting

Reset: Unplug for 2 minutes, then restart.

Service: 1-800-211-9604; www.cuisinart.com