cuisinart keurig k-cup single-serve brewing system manual

The Cuisinart Keurig K-Cup Single-Serve Brewing System is a compact coffee maker designed for convenient single-serve brewing using K-Cup pods. It features multiple cup size options, automatic shut-off, removable drip tray, water reservoir, descaling function, and compatibility with various K-Cup pod varieties. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Brewing Process 7. Maintenance & Cleaning 8. Descaling Procedure 9. Care Instructions 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Brewing chamber, Water reservoir, Control panel, Drip tray, Power button, Cup size selection buttons.

FeatureDescription
Brewing chamberFor inserting K-Cup pods
Water reservoirRemovable tank for water supply
Control panelPower and cup size selection buttons
Drip trayRemovable tray for spills and mug support
Power buttonTurns brewer on/off
Cup size buttons6oz, 8oz, 10oz brew size options
Descale indicatorAlerts when descaling is needed
Auto shut-offTurns off automatically after 90 seconds
Energy saving modeReduces power consumption when not in use
Brewing indicator lightShows when brewing is in progress

Installation & Setup

Unpack and inspect all components. Place on clean, stable surface.

  1. Remove packaging materials and protective tapes.
  2. Wash removable parts: Clean water reservoir and drip tray with warm water.
  3. Fill water reservoir: Remove reservoir, fill with fresh cold water, replace securely.
  4. Plug into electrical outlet: Use 120V AC power source.
  5. Prime the system: Run water through without K-Cup pod for initial setup.

WARNING! Ensure hands are dry when handling electrical components. Place on heat-resistant surface away from edges.

First-Time Use

Power on brewer; follow initial setup procedure.

  1. Power on: Press POWER button; wait for ready indicator.
  2. Prime system: Place mug on drip tray, lift and close handle without K-Cup, press brew button for each cup size.
  3. Insert K-Cup: Lift handle, place K-Cup in chamber, close handle firmly.
  4. Select cup size: Choose 6oz, 8oz, or 10oz based on preference.
  5. Start brewing: Press brew button; brewing completes automatically.

CAUTION! First few brews may contain manufacturing residues; discard first 2-3 brews.

Specifications

Controls and Settings

Control panel includes POWER button and cup size selection buttons.

Indicator Lights: Power light (green when ready), Descaling light (red when needed), Brewing light (flashing during brew).

Brew Size Selection: 6oz for strong coffee, 8oz for regular, 10oz for mild. Auto Shut-off: Activates 90 seconds after last use. Descaling Mode: Activated by holding 8oz and 10oz buttons simultaneously for 3 seconds.

Brewing Process

Simple three-step brewing with K-Cup pods.

  1. Lift handle: Open brewing chamber access.
  2. Insert K-Cup: Place pod in chamber, ensuring proper seating.
  3. Close handle: Firmly close until it clicks into place.
  4. Place mug: Position cup on drip tray.
  5. Select size: Choose desired brew volume.
  6. Press brew: Start brewing process; completes automatically.
  7. Remove pod: Lift handle after brewing; discard used K-Cup.

Tip: For hotter coffee, run water through without pod first to preheat system.

Maintenance & Cleaning

Regular cleaning ensures optimal performance and coffee flavor.

  1. Daily: Wipe exterior with damp cloth; empty drip tray.
  2. Weekly: Remove and wash water reservoir and drip tray.
  3. Monthly: Clean brewing chamber with damp cloth.
  4. Descaling: Perform every 3-6 months based on water hardness.

WARNING! Unplug before cleaning. Never immerse brewer in water.

Descaling Procedure

Essential maintenance to remove mineral buildup.

  1. Prepare solution: Mix descaling solution with water as directed.
  2. Enter descale mode: Hold 8oz and 10oz buttons for 3 seconds.
  3. Add solution: Pour into empty water reservoir.
  4. Start process: Press brew button repeatedly until reservoir empty.
  5. Rinse: Fill reservoir with fresh water; brew multiple times to rinse.
  6. Exit mode: Press power button to return to normal operation.

CAUTION! Use only manufacturer-approved descaling solutions.

Care Instructions

Unplug when not in use for extended periods. Store in dry location.

CAUTION! Do not use abrasive cleaners. Avoid extreme temperatures. Keep away from children.

Regulatory Information

UL listed; complies with FCC Part 15 Class B. Copyright © Cuisinart. For support, visit www.cuisinart.com or contact 1-800-211-9604. Manufactured for Conair Corporation.

Troubleshooting

SymptomPossible CauseCorrective Action
Brewer won't power onPower connectionCheck outlet; ensure plug is secure; try different outlet.
No water flowEmpty reservoir/clogFill water reservoir; check for clogs in needle.
Weak coffeeBrew size/mineral buildupUse smaller cup size; descale system.
Leaking waterLoose connectionsEnsure reservoir seated properly; check seal integrity.
Descale light onMineral buildupPerform descaling procedure immediately.

Reset: Unplug for 2 minutes, then restart.

Service: 1-800-211-9604; www.cuisinart.com

Cuisinart Keurig K-Cup Single-Serve Brewing System Manual © - All Rights Reserved 2025