Cuisinart Keurig Mini Manual

The Cuisinart Keurig Mini is a compact single-serve coffee brewing system designed for home use. It features K-Cup pod compatibility, multiple brew sizes, removable drip tray, auto-off function, descaling alert, and simple one-button operation. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Use 4. Specifications 5. Controls and Operation 6. Brewing Process 7. Cleaning & Maintenance 8. Descaling Procedure 9. Care Instructions 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Compact brewing chamber, Water reservoir, Removable drip tray, Power button, Brew button, Indicator lights.

Feature	Description
Brew Sizes	6oz, 8oz, 10oz cup options
K-Cup Compatibility	Works with all Keurig K-Cup pods
Water Reservoir	Removable 48oz capacity
Auto-Off	Automatically turns off after 90 seconds
Descaling Alert	Indicator light signals when descaling is needed
Removable Drip Tray	Accommodates travel mugs up to 7.2 inches
Power Button	Turns brewer on/off
Brew Button	Initiates brewing cycle
Indicator Lights	Power, Ready to Brew, Descaling Alert
Compact Design	Space-saving footprint for countertops

Installation & Setup

Unpack and inspect all components. Place on clean, level surface.

Remove packaging materials and stickers from brewer.
Wash water reservoir with warm, soapy water and rinse thoroughly.
Fill reservoir with fresh cold water and place back on brewer.
Plug power cord into grounded electrical outlet.
Allow brewer to prime for initial setup.

WARNING! Do not use brewer without water in reservoir. Keep away from heat sources and moisture.

First-Time Use

Prime the brewing system before first use.

Press POWER button to turn brewer on.
Wait for READY light to illuminate (approximately 3 minutes).
Lift and close handle without inserting K-Cup pod.
Place mug on drip tray and press BREW button.
Allow full reservoir of water to run through system.
Repeat process with fresh water if needed.

CAUTION! Brewer will be hot after use. Handle with care.

Specifications

Dimensions: 12.5" H x 9.5" W x 12.5" D
Water Reservoir: 48oz removable capacity
Brew Sizes: 6oz, 8oz, 10oz
Power: 120V AC, 60Hz, 1470W
Weight: 7.5 lbs
Auto-Off: 90 seconds after last brew
Compatibility: All Keurig K-Cup pods
Warranty: 1-year limited warranty
Color Options: Black, Stainless Steel

Controls and Operation

Simple one-button brewing with indicator lights.

Front Panel: POWER button, BREW button, READY light, DESCALE light.

Operation: Press POWER to turn on. Wait for READY light. Lift handle, insert K-Cup pod, close handle. Place mug on drip tray. Press BREW button. Brewer automatically shuts off 90 seconds after brewing completes. DESCALE light illuminates when mineral buildup requires cleaning.

Brewing Process

Simple steps for perfect coffee every time.

Press POWER button to turn brewer on.
Wait for READY light to illuminate (approx. 3 minutes).
Lift handle and insert K-Cup pod into brewing chamber.
Close handle firmly until it clicks into place.
Place mug (6-10oz) on removable drip tray.
Press BREW button to start brewing cycle.
Brewing completes automatically in under 1 minute.
Brewer turns off automatically 90 seconds after cycle ends.

Tip: Use fresh cold water for best tasting coffee.

Cleaning & Maintenance

Regular cleaning ensures optimal performance.

Daily: Wipe exterior with damp cloth.
Weekly: Remove and wash drip tray and water reservoir.
Monthly: Clean brewing needle with paper clip.
As needed: Descale when DESCALE light illuminates.
Empty and rinse water reservoir regularly.

WARNING! Unplug brewer before cleaning. Never immerse in water.

Descaling Procedure

Required every 3-6 months depending on water hardness.

Mix descaling solution with full reservoir of water.
Place large mug or container on drip tray.
Press POWER and BREW buttons simultaneously for 3 seconds.
Press BREW button to start descaling cycle.
Repeat brewing until reservoir is empty.
Rinse reservoir and fill with fresh water.
Run multiple cycles with fresh water to rinse system.

CAUTION! Use only Keurig descaling solution or vinegar solution.

Care Instructions

Unplug before cleaning. Wipe exterior with soft, damp cloth only.

CAUTION! Do not use abrasive cleaners or immerse in water. Keep away from heat sources and direct sunlight.

Regulatory Information

UL Listed: Complies with UL standards for household use. FCC Part 15: Class B digital device. Copyright © Cuisinart. For support, visit www.cuisinart.com or contact 1-800-211-9604. Manufactured for Cuisinart, 150 Milford Road, East Windsor, NJ 08520.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Brewer won't turn on	Power connection	Check power cord; ensure outlet is working; press POWER button firmly.
No water flow	Empty reservoir/clog	Fill water reservoir; check for clogs in needle; descale if needed.
Coffee tastes weak	Mineral buildup	Descale brewer; use fresh water; check K-Cup expiration.
DESCALE light on	Mineral accumulation	Perform descaling procedure; use approved descaling solution.
Leaking water	Loose connections	Ensure reservoir properly seated; check seal integrity; contact service.

Reset: Unplug for 2 minutes, then restart.

Service: 1-800-211-9604; www.cuisinart.com