Downloadable Keurig K60 Manual

The Keurig K60 is a premium single-serve coffee brewing system featuring programmable settings, multiple cup size options, removable drip tray, energy-saving auto-off function, descaling alerts, and compatibility with all K-Cup pods. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Brewing Process 7. Maintenance & Cleaning 8. Descaling Procedure 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Brewing system with programmable settings, Water reservoir, Removable drip tray, LCD display, Power button, Brew size buttons.

Feature	Description
Water reservoir	Removable 48oz capacity with handle
Brew size options	6oz, 8oz, 10oz programmable sizes
LCD display	Shows brewing status and settings
Removable drip tray	Accommodates travel mugs up to 7.2"
Energy saving	Auto-off after 90 seconds
Descaling indicator	Alerts when descaling is needed
Brew button	Starts brewing process
Power button	Turns brewer on/off
Add water indicator	Lights when reservoir is low
Heating element	1500W for fast heating

Installation

Unpack and inspect contents. Place on clean, level surface.

Remove packaging materials and stickers.
Place brewer on stable, level countertop.
Fill water reservoir with fresh cold water.
Plug into 120V AC power outlet.
Prime the brewing system by running water through without K-Cup.

WARNING! Do not use hot water in reservoir. Ensure brewer is on stable surface to prevent tipping.

First-Time Setup

Power on brewer; follow initial setup procedure.

Prime the system: Press power button, place mug, press brew button without K-Cup.
Program brew sizes: Use brew size buttons to set preferred volumes.
Set auto-off: Default 90 seconds; can be changed in settings.
Test brew: Insert K-Cup and brew first cup to ensure proper operation.

CAUTION! First brew may contain manufacturing residues; discard first few cups.

Specifications

Dimensions: 13.3" H x 10.2" W x 13.1" D
Water Reservoir: 48 oz removable
Power: 1500W, 120V AC, 60Hz
Brew Sizes: 6oz, 8oz, 10oz programmable
Brew Time: Under 1 minute
Auto-Off: 90 seconds default
Weight: 9.5 lbs
Compatibility: All K-Cup pod varieties
Warranty: 1 year limited

Controls and Settings

Front panel controls: Power button, Brew button, 6oz/8oz/10oz size buttons, LCD display.

LCD Indicators: Power on, Heating, Ready to brew, Add water, Descaling alert.

Programming: Press and hold brew size button for 3 seconds to program volume. Auto-off: Can be disabled or set to different intervals. Water filter: Compatible with Keurig water filter kit (sold separately).

Brewing Process

Step-by-step brewing instructions:

Lift handle and insert K-Cup pod.
Close handle firmly until it clicks.
Place mug on drip tray (remove drip tray for travel mugs).
Select desired brew size (6oz, 8oz, or 10oz).
Press brew button to start cycle.
Brewing completes automatically.
Lift handle to eject used K-Cup pod.

Tip: For stronger coffee, use smaller brew size with same K-Cup.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Daily: Wipe exterior with damp cloth.
Weekly: Clean water reservoir and drip tray.
Monthly: Descale brewing system.
As needed: Replace water filter (if installed).

CAUTION! Unplug brewer before cleaning. Never immerse in water.

Descaling Procedure

Required every 3-6 months depending on water hardness.

Prepare descaling solution or white vinegar.
Fill reservoir with descaling solution.
Run brew cycles without K-Cup until reservoir empty.
Rinse reservoir and run 2-3 cycles with clean water.
Reset descaling indicator if applicable.

WARNING! Use only Keurig descaling solution or white vinegar. Rinse thoroughly.

Regulatory Information

UL listed; FCC Part 15 compliant. Manufactured for Keurig Green Mountain, Inc. Copyright © 2025 Keurig. For support, visit www.keurig.com or contact 1-866-901-2739. This device complies with part 15 of the FCC Rules.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Brewer won't power on	Power connection	Check outlet; ensure power cord plugged in securely.
No water flow	Clogged needle/descaling needed	Descale brewer; check for clogged exit needle.
Small cup brewed	Water reservoir empty	Refill water reservoir; ensure properly seated.
Coffee tastes weak	Brew size too large	Use smaller brew size; try stronger K-Cup variety.
Leaking water	Loose connections/reservoir issue	Check reservoir seating; inspect water tank for cracks.

Reset: Unplug for 2 minutes then restart.

Service: 1-866-901-2739; www.keurig.com