Hamilton Beach Keurig Manual

The Hamilton Beach Keurig is a single-serve coffee brewing system that uses K-Cup pods to brew fresh coffee, tea, and other beverages quickly and conveniently. Features include multiple brew sizes, programmable settings, removable water reservoir, descaling function, energy-saving auto-off, and compatibility with most K-Cup pods. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Brew chamber, Water reservoir, Control panel, Drip tray, K-Cup holder, Power cord.

Installation and Setup

Unpack and inspect all components. Remove all packaging materials.

1. Place brewer on stable, level surface away from heat sources.
2. Remove water reservoir and rinse thoroughly with clean water.
3. Fill reservoir with fresh cold water and replace on brewer.
4. Plug power cord into 120V AC outlet.
5. Prime the system by running water through without a K-Cup pod.

WARNING! Do not use without water in reservoir. Keep away from children.

First-Time Use

Power on brewer; follow initial setup procedure.

1. Press power button to turn on brewer.
2. Allow brewer to heat up (approximately 3 minutes).
3. Lift and close brew handle to puncture K-Cup.
4. Select desired brew size (6oz, 8oz, or 10oz).
5. Place mug on drip tray and press brew button.
6. Brewing completes in approximately 1 minute.

CAUTION! Hot surfaces - use care when handling.

Specifications

• Model: Hamilton Beach Keurig Single Serve
• Brew Sizes: 6oz, 8oz, 10oz
• Water Reservoir: 48oz capacity
• Power: 120V AC, 60Hz, 1500W
• Brew Time: Approximately 1 minute
• Temperature: 192°F brewing temperature
• Dimensions: 13.2" H x 10.2" W x 13.3" D
• Weight: 7.5 lbs
• Compatibility: Most K-Cup pods
• Warranty: 1-year limited

Controls and Settings

Control Panel: Power button, Brew size buttons (6oz, 8oz, 10oz), Add Descaling Solution indicator.

Functions: Power On/Off, Brew Size Selection, Auto-off (2 hours), Descaling Mode, Brew Strength Control.

Settings: Programmable auto-off timer, Brew temperature adjustment, Water filter indicator (if equipped), Descaling reminder.

Brewing Process

Step-by-step brewing instructions:

1. Ensure brewer is powered on and heated.
2. Lift brew handle to open K-Cup chamber.
3. Insert K-Cup pod into holder.
4. Close brew handle firmly to puncture pod.
5. Place mug on drip tray (minimum 5oz capacity).
6. Select desired brew size button.
7. Brewing begins automatically.
8. Remove mug when brewing completes.
9. Discard used K-Cup pod after brewing.

Tip: For stronger coffee, use 6oz setting with dark roast pods.

Maintenance and Cleaning

Regular maintenance ensures optimal performance.

1. Daily: Wipe exterior with damp cloth.
2. Weekly: Clean water reservoir and drip tray.
3. Monthly: Descale with vinegar or descaling solution.
4. As needed: Clean needle with paper clip if clogged.
5. Empty and rinse drip tray regularly.

WARNING! Unplug before cleaning. Never immerse in water.

Descaling Procedure

Descale every 3-6 months or when indicator light appears.

1. Empty water reservoir and fill with descaling solution.
2. Place large mug or container on drip tray.
3. Press and hold 8oz and 10oz buttons for 3 seconds to enter descale mode.
4. Press brew button to start descaling cycle.
5. Repeat brewing until reservoir is empty.
6. Rinse reservoir thoroughly and fill with clean water.
7. Run several brewing cycles with clean water to rinse system.

Care Instructions

Unplug before cleaning. Wipe exterior with damp cloth only; no abrasive cleaners.

CAUTION! Do not use harsh chemicals; keep electrical components dry. Store in dry location.

Regulatory Information

UL Listed: Complies with UL standards for household use. FCC Part 15: Class B digital device. Copyright © 2025 Hamilton Beach Brands, Inc. For support, visit www.hamiltonbeach.com or contact 1-800-851-8900.

Troubleshooting

Reset: Unplug for 2 minutes, then restart.

Service: 1-800-851-8900; www.hamiltonbeach.com