Keurig 2.0 K200 Manual PDF

The Keurig 2.0 K200 is a single-serve coffee brewing system featuring K-Cup pod compatibility, multiple brew sizes, energy saving mode, removable drip tray, descaling alert, and digital display. Designed for home use with 120V AC power. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Digital display, Water reservoir, K-Cup pod holder, Drip tray, Power button, Brew size buttons.

Installation & Setup

Unpack and inspect contents. Place on clean, stable surface.

1. Remove packaging materials: Take off all tape and protective covers.
2. Wash water reservoir: Remove and rinse with warm water.
3. Prime the brewer: Fill reservoir, place mug, run water-only cycle.
4. Plug into AC power: Use 120V outlet only.

WARNING! Do not use without water. Keep away from children. Ensure stable surface placement.

First-Time Use

Power on brewer; follow initial setup procedure.

1. Fill water reservoir: Use fresh cold water only.
2. Insert K-Cup pod: Lift handle, place pod, close firmly.
3. Select brew size: Choose 4oz, 6oz, 8oz, or 10oz.
4. Start brewing: Press brew button; process completes automatically.

CAUTION! Hot surfaces during and after brewing. Handle with care.

Specifications

• Dimensions: 13.2" H x 10.2" W x 13.2" D
• Water Reservoir: 40oz removable
• Brew Sizes: 4oz, 6oz, 8oz, 10oz
• Power: 120V AC, 60Hz, 1470W
• Brew Time: Under 1 minute
• Weight: 7.5 lbs
• Display: Digital LCD
• Compatibility: All K-Cup pods
• Warranty: 1 year limited

Controls and Settings

Access settings via digital display buttons. Front Panel: POWER, BREW, HOT WATER, BREW SIZE SELECTION.

Display Features: Brew progress, Descaling alert, Water level, Energy saving mode indicator.

Brew Settings: Size selection (4oz, 6oz, 8oz, 10oz), Strength control, Auto off timer. Maintenance: Descaling mode, Water filter reminder, System reset.

Brewing Process

Simple three-step brewing with K-Cup pods.

1. Lift handle: Open K-Cup pod compartment.
2. Insert pod: Place K-Cup in holder, close handle firmly.
3. Place mug: Ensure mug is on drip tray.
4. Select size: Choose desired brew size.
5. Press brew: Brewer starts automatically.
6. Wait completion: Brewer shuts off when done.

Tip: Use fresh water for best taste. Clean mug platform regularly.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

1. Daily: Wipe exterior with damp cloth.
2. Weekly: Clean water reservoir and drip tray.
3. Monthly: Descale as needed (see descaling section).
4. As needed: Replace water filter every 2 months.

WARNING! Unplug before cleaning. Never immerse in water.

Descaling Procedure

Descale when indicator light appears or every 3-6 months.

1. Prepare solution: Use Keurig descaling solution or vinegar/water mix.
2. Enter descale mode: Hold 8oz and 10oz buttons for 3 seconds.
3. Add solution: Pour into water reservoir.
4. Start process: Follow on-display instructions.
5. Rinse thoroughly: Run multiple water-only cycles.

CAUTION! Use only approved descaling solutions. Rinse completely.

Care Instructions

Unplug before any maintenance. Use soft, damp cloth for cleaning.

CAUTION! Do not use abrasive cleaners. Keep electrical components dry. Store in dry location.

Regulatory Information

UL listed: Complies with UL 197. FCC Part 15: Class B digital device. Copyright © 2024 Keurig Green Mountain, Inc. All rights reserved. For support, visit www.keurig.com or contact 1-866-901-2739.

Troubleshooting

Reset: Unplug for 2 minutes to reset system.

Service: 1-866-901-2739; www.keurig.com