keurig 50 manual

The Keurig 50 is a single-serve coffee brewing system with programmable settings, multiple cup sizes, water reservoir, descaling function, auto-off feature, and compatibility with K-Cup pods. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Using the Brewer 7. Maintenance 8. Descaling Procedure 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Water reservoir, K-Cup pod holder, Drip tray, Control panel, Power button, Cup size selection.

Feature	Description
Water reservoir	Removable 48oz water tank with handle
K-Cup pod holder	Accepts all K-Cup pod varieties
Drip tray	Removable for easy cleaning
Control panel	LCD display with touch buttons
Power button	Turns brewer on/off
Cup size selection	4oz, 6oz, 8oz, 10oz brew sizes
Programmable settings	Auto on/off, brightness control
Descale indicator	Alerts when descaling is needed
Brew temperature control	Adjustable brew temperature
Hot water button	Dispenses hot water without pod

Installation

Unpack and inspect contents. Place on clean, level surface.

Remove all packaging materials and stickers.
Wash water reservoir and drip tray with warm, soapy water.
Place brewer on stable, level countertop away from edges.
Plug into 120V AC power outlet.

WARNING! Keep away from water sources. Ensure hands are dry when handling electrical components.

First-Time Setup

Prime the brewing system before first use.

Fill water reservoir with fresh cold water.
Place mug on drip tray.
Turn on brewer - press POWER button.
Without inserting pod, select largest cup size to run water through system.
Repeat priming process 2-3 times to clear air from lines.

CAUTION! Do not use hot water in reservoir. Use only cold, fresh water.

Specifications

Water Reservoir: 48 oz removable tank
Brew Sizes: 4oz, 6oz, 8oz, 10oz
Power: 120V AC, 60Hz, 1470W
Brew Time: Under 1 minute
Temperature: 192°F optimal brew temperature
Dimensions: 13.5" H x 10.2" W x 13.2" D
Weight: 8.5 lbs
Auto-off: Programmable 5 min to 2 hours
Compatibility: All K-Cup pod varieties

Controls and Settings

Control panel features: POWER, CUP SIZE (4oz, 6oz, 8oz, 10oz), HOT WATER, MENU, STRENGTH CONTROL.

Menu Settings: Auto-off timing, Display brightness, Brew temperature, Factory reset.

Programming: Press MENU to access settings. Use arrow buttons to navigate. Press SELECT to confirm changes.

Using the Brewer

Brewing coffee with K-Cup pods.

Lift handle to open pod holder.
Insert K-Cup pod - foil lid facing up.
Close handle firmly until it clicks.
Place mug on drip tray (min 5oz capacity).
Select desired cup size.
Brewing begins automatically.
Remove mug when brewing completes.

Tip: For stronger coffee, use smaller cup size setting.

Maintenance

Regular maintenance ensures optimal performance.

Empty and rinse water reservoir daily
Wipe exterior with damp cloth
Remove and clean drip tray weekly
Clean pod holder area after each use
Descale every 3-6 months

WARNING! Unplug brewer before cleaning. Never immerse in water.

Descaling Procedure

Descale when indicator light appears or every 3-6 months.

Fill reservoir with descaling solution or white vinegar/water mix.
Place large container on drip tray (at least 48oz capacity).
Press and hold 4oz and 10oz buttons simultaneously for 3 seconds.
Select each cup size in sequence as prompted.
Rinse by repeating with fresh water 2-3 times.

CAUTION! Use only Keurig descaling solution or vinegar solution. Rinse thoroughly.

Care & Cleaning

Unplug before cleaning. Use mild detergent and soft cloth. Never use abrasive cleaners.

CAUTION! Do not use steel wool or harsh chemicals. Keep electrical components dry.

Regulatory Information

UL listed. FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Keurig Green Mountain, Inc. For support, visit www.keurig.com or contact 1-866-901-2739.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Brewer won't turn on	Power connection	Check power cord; ensure outlet works; reset GFCI outlet.
No water flow	Clogged needles/reservoir	Clean exit needle; ensure reservoir seated properly; descale.
Small cup size	Mineral buildup	Descale brewer; clean water reservoir.
Leaking water	Loose connections	Check reservoir seal; ensure pod holder closed completely.
Error lights	System error	Unplug for 2 minutes; plug back in; contact service if persists.

Reset: Unplug for 2 minutes or press and hold POWER for 10 seconds.

Service: 1-866-901-2739; www.keurig.com