Keurig B150 Commercial Brewing System Manual

The Keurig B150 Commercial Brewing System is a high-capacity single-serve coffee brewer designed for office and commercial environments. It features a large 90-ounce removable water reservoir, multiple brew sizes, programmable settings, descale mode, and compatibility with K-Cup pods. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Brewing Operation 7. Maintenance & Cleaning 8. Descaling Procedure 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Large 90oz water reservoir, LCD display, brew size selector, power button, removable drip tray, descale indicator, and programmable settings.

Feature	Description
Water Reservoir	90-ounce removable reservoir with handle
Brew Sizes	6oz, 8oz, 10oz programmable options
LCD Display	Shows status, settings, and alerts
Power Button	Main power control
Brew Button	Starts brewing process
Drip Tray	Removable for easy cleaning
Descale Indicator	Alerts when descaling is needed
Programmable Settings	Auto-off timer, brew temperature
K-Cup Compatibility	Works with all K-Cup pod varieties
Commercial Grade	Designed for high-volume use

Installation

Unpack and inspect contents. Place on stable, level surface.

Remove all packaging materials and protective tape.
Place brewer on flat, stable countertop near power outlet.
Fill water reservoir with fresh cold water and reinstall.
Plug power cord into grounded electrical outlet.
Prime the system by running water through without a K-Cup.

WARNING! Ensure proper ventilation around brewer. Keep away from heat sources and water.

First-Time Setup

Power on brewer; follow initial setup procedure.

Press POWER button to turn on brewer.
Allow brewer to heat up (approximately 3 minutes).
Program brew sizes: Use menu to set preferred 6oz, 8oz, or 10oz options.
Set auto-off timer: Configure energy-saving auto-shutoff (2-4 hours).
Adjust brew temperature if desired.

CAUTION! Do not operate without water in reservoir. First brew may contain manufacturing residues.

Specifications

Water Capacity: 90 ounces removable reservoir
Brew Sizes: 6oz, 8oz, 10oz programmable
Power Requirements: 120V AC, 60Hz, 1470W
Dimensions: 13.5" W x 15.5" D x 13.7" H
Weight: 12.5 lbs
Brew Time: Under 1 minute per cup
Temperature Control: Adjustable brew temperature
Auto-Off: Programmable 2-4 hour shutoff
Compatibility: All K-Cup pod varieties
Warranty: 1-year commercial limited warranty

Controls and Settings

Access settings via LCD display and control buttons.

Front Panel: POWER, BREW, MENU, UP/DOWN arrows, SELECT.

Settings Menu: Auto-off timer (2-4 hours), Brew temperature (187°F-192°F), Brew size programming (6oz/8oz/10oz), Language selection, Factory reset.

Indicator Lights: Power, Heating, Ready to Brew, Add Water, Descaling Required.

Brewing Operation

Daily brewing procedure for optimal performance.

Ensure brewer is powered on and ready indicator is lit.
Lift handle and insert K-Cup pod into holder.
Close handle firmly until it clicks into place.
Place cup on drip tray (remove for travel mugs).
Select desired brew size if multiple options programmed.
Press BREW button to start brewing cycle.
Wait for cycle to complete (less than 1 minute).
Remove cup and enjoy.

Tip: Always use fresh cold water for best tasting coffee.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

Daily: Wipe exterior with damp cloth; empty drip tray.
Weekly: Remove and wash water reservoir; clean exit needle.
Monthly: Deep clean brewing chamber; descale as needed.
As needed: Replace water filter (if equipped).

CAUTION! Unplug brewer before cleaning. Never immerse in water.

Descaling Procedure

Descale every 3-6 months or when indicator light appears.

Prepare descaling solution according to manufacturer instructions.
Pour solution into empty water reservoir.
Place large container (at least 48oz) under brew head.
Enter descale mode through settings menu.
Follow on-screen prompts to complete descaling cycle.
Rinse thoroughly by running multiple reservoirs of clean water.
Reset descale indicator when complete.

WARNING! Use only Keurig descaling solution or approved alternatives.

Regulatory Information

UL Listed: Certified for commercial use. FCC Part 15: Class B digital device compliance. Energy Star: Meets energy efficiency guidelines. Copyright © 2025 Keurig Green Mountain, Inc. All rights reserved. For support, visit www.keurig.com or contact 1-866-901-BREW (2739).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Brewer won't power on	Power connection	Check power cord; ensure outlet is working; reset circuit breaker.
No water flow	Empty reservoir/clog	Refill water reservoir; check for clogs; descale if needed.
Small cup volume	Mineral buildup	Descale brewer; check water filter.
Leaking water	Loose connections	Ensure reservoir properly seated; check hose connections.
Poor coffee taste	Old water/needs cleaning	Use fresh water; clean brewer; replace water filter.
Descale light on	Mineral buildup	Perform descaling procedure; reset indicator.

Reset: Unplug for 2 minutes then restart.

Service: 1-866-901-BREW (2739); www.keurig.com