Keurig B30 Mini Manual

The Keurig B30 Mini is a compact single-serve coffee brewer designed for home or office use, featuring K-Cup pod compatibility, removable drip tray, 48-ounce water reservoir, programmable auto-off, brew strength control, descaling indicator, and energy-saving features. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Compact brewer body, Removable drip tray, 48-ounce water reservoir, K-Cup pod holder, Control panel with LCD display.

Installation

Unpack and inspect contents. Place on clean, stable surface.

1. Remove all packaging materials from brewer and components.
2. Wash removable parts: Clean water reservoir and drip tray with warm water.
3. Fill reservoir: Add fresh cold water to maximum fill line.
4. Plug into standard 120V AC outlet.
5. Prime the system: Run water through without K-Cup for initial setup.

WARNING! Do not use brewer without water. Keep away from heat sources and moisture.

First-Time Setup

Power on brewer; follow initial setup procedure.

1. Prime the system: Press power button, place mug, press brew without K-Cup.
2. Program brew size: Use brew size button to select preferred cup size (6oz, 8oz, 10oz).
3. Set auto-off: Press and hold auto-off button to set 90-minute timer.
4. Test brew: Insert K-Cup and brew first cup to ensure proper operation.

CAUTION! Handle hot surfaces with care. Brewer heats water to 192°F.

Specifications

• Dimensions: 9.8" W x 13.2" H x 11.5" D
• Water Reservoir: 48 oz removable
• Brew Sizes: 6oz, 8oz, 10oz programmable
• Brew Time: Under 1 minute per cup
• Power: 120V AC, 60Hz, 1470W
• Water Temp: 192°F brewing temperature
• Compatibility: All Keurig K-Cup pods
• Weight: 7.5 lbs
• Warranty: 1-year limited

Controls and Settings

Control Panel: POWER button, BREW button, STRENGTH button, AUTO OFF button, LCD display.

Brew Sizes: Press BREW SIZE to cycle through 6oz, 8oz, 10oz options. Brew Strength: STRENGTH button toggles between Regular and Bold. Auto-Off: Programmable 90-minute energy-saving shut-off. Display Messages: READY, HEATING, ADD WATER, DESCALING, BREWING.

Using Your Brewer

Daily brewing procedure for perfect coffee every time.

1. Lift handle: Open K-Cup holder by raising handle.
2. Insert K-Cup: Place K-Cup pod in holder, close handle firmly.
3. Place mug: Position mug on drip tray.
4. Select brew size: Choose 6oz, 8oz, or 10oz.
5. Select strength: Regular or Bold for stronger flavor.
6. Press BREW: Brewer will start automatically when ready.
7. Remove mug: Carefully remove hot mug when brewing completes.

Tip: Always use fresh cold water for best tasting coffee.

Cleaning & Maintenance

Regular cleaning ensures optimal performance and coffee quality.

1. Daily: Wipe exterior with damp cloth.
2. Weekly: Remove and wash drip tray and water reservoir.
3. Monthly: Clean K-Cup holder and exit needle.
4. As needed: Descale when indicator light appears.

WARNING! Unplug brewer before cleaning. Never immerse in water.

Descaling Procedure

Descale every 3-6 months or when DESCALE light appears.

1. Fill reservoir with descaling solution or white vinegar/water mix.
2. Place large container on drip tray (at least 48oz capacity).
3. Press and hold AUTO OFF and BREW buttons for 3 seconds to enter descale mode.
4. Press BREW to start descaling cycle.
5. Repeat brew cycles until reservoir is empty.
6. Rinse thoroughly by running 2-3 reservoirs of clean water through system.

CAUTION! Use only Keurig descaling solution or approved alternatives.

Regulatory Information

UL Listed: Certified for safety standards. FCC Part 15: Class B digital device compliance. Energy Star: Meets energy efficiency guidelines. Copyright © Keurig Green Mountain, Inc. For support, visit www.keurig.com or contact 1-866-901-2739.

Troubleshooting

Reset: Unplug for 2 minutes, then restart.

Service: 1-866-901-2739; www.keurig.com