Keurig B40 Elite Brewing System Manual

The Keurig B40 Elite Brewing System is a premium single-serve coffee maker featuring programmable settings, multiple brew sizes, removable water reservoir, energy-saving auto-off function, descale indicator, and compatibility with all K-Cup pods. Designed for home and office use with 120V AC power. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Brewing Process 7. Maintenance & Cleaning 8. Programming Options 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Brewing mechanism, Removable water reservoir, LCD display, Control panel, Drip tray, K-Cup pod holder.

Feature	Description
Water reservoir	48oz removable reservoir with handle
Brew sizes	6oz, 8oz, 10oz programmable options
LCD display	Shows time, settings, and status messages
Auto-off	Energy saving 2-hour auto shut-off
Descale indicator	Alerts when descaling is needed
Brew temperature	192°F optimal brewing temperature
Power button	Turns brewing system on/off
Brew button	Initiates brewing process
Program button	Sets brew size and clock
Strength control	Adjusts brew strength when available

Installation

Unpack and inspect contents. Place on clean, level surface.

Remove packaging materials and stickers.
Wash removable water reservoir with warm soapy water, rinse thoroughly.
Place drip tray and mug platform in position.
Fill reservoir with fresh cold water and reinstall.
Plug into grounded 120V AC outlet.

WARNING! Do not use without water. Keep away from heat sources and moisture.

First-Time Setup

Power on brewer; follow priming procedure.

Prime the system: Power on, lift and close handle without K-Cup, select largest brew size.
Run water through: Repeat brewing cycle 2-3 times without K-Cup pod.
Set clock: Press PROGRAM button to set current time.
Program brew size: Use PROGRAM button to set preferred default brew size.
Insert K-Cup: Lift handle, place K-Cup in holder, close handle firmly.

CAUTION! First few brews may contain manufacturing residues; discard initial brews.

Specifications

Dimensions: 13.3" H x 10.2" W x 13.9" D
Water Capacity: 48oz removable reservoir
Brew Sizes: 6oz, 8oz, 10oz programmable
Power: 120V AC, 60Hz, 1470W
Brew Time: Approximately 1 minute per cup
Temperature: 192°F brewing temperature
Compatibility: All K-Cup pod varieties
Weight: 7.5 lbs
Warranty: 1-year limited warranty

Controls and Settings

Access settings via control panel buttons and LCD display.

Control Panel: POWER, BREW, PROGRAM, 6oz, 8oz, 10oz brew size buttons.

Brew Sizes: 6oz (small), 8oz (medium), 10oz (large) - programmable as default. Clock Setting: Press PROGRAM to set time. Auto-Off: Automatically turns off after 2 hours of inactivity. Descaling: Indicator light alerts when descaling is required. Strength Control: Available for certain K-Cup varieties.

Brewing Process

Simple one-touch brewing with any K-Cup pod.

Ensure water reservoir is filled and properly seated.
Lift handle and place K-Cup pod in holder.
Close handle firmly until it clicks into place.
Place mug on drip tray platform.
Select desired brew size (6oz, 8oz, or 10oz).
Press BREW button to start brewing cycle.
Brewing completes automatically in about 1 minute.
Lift handle to eject used K-Cup pod.

Tip: Preheat mug with hot water for hotter coffee.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

Daily: Wipe exterior with damp cloth, empty drip tray.
Weekly: Remove and wash water reservoir, drip tray, and mug platform.
Monthly: Descale brewing system using Keurig descaling solution.
As needed: Clean needle with paper clip if clogged.
Water Filter: Replace every 2 months or 60 tank refills.

WARNING! Unplug before cleaning. Never immerse brewer in water.

Programming Options

Customize your brewing experience with programmable features.

Default Brew Size: Press and hold desired brew size button until light stays on. Clock Setting: Press PROGRAM, use brew size buttons to adjust time. Auto-Off: Cannot be disabled; standard 2-hour setting. Descaling Reminder: Automatic indicator based on water hardness and usage.

Care & Storage

Unplug and empty water reservoir before storage. Store in cool, dry place.

CAUTION! Do not store with water in reservoir. Protect from freezing temperatures.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Brewer won't power on	Power connection	Check outlet; ensure power cord is plugged in securely.
No water flow	Clogged needle/reservoir	Clean exit needle; ensure reservoir is properly seated.
Small cup volume	Mineral buildup	Descale brewer; check water filter.
Leaking water	Loose connections	Check reservoir seal; ensure handle is closed completely.
Error messages	System errors	Unplug for 2 minutes, then restart; contact support if persistent.

Reset: Unplug for 2 minutes to reset system.

Service: 1-866-901-2739; www.keurig.com