Keurig B40 Instruction Manual

The Keurig B40 is a single-serve coffee brewing system featuring K-Cup pod compatibility, programmable settings, removable 48oz water reservoir, automatic shut-off, adjustable brew strength, cup size options (6oz, 8oz, 10oz), descale indicator, and energy-saving mode. Powered by 120V AC, 60Hz. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Brewing Process 7. Maintenance & Cleaning 8. Descaling Procedure 9. Storage & Care 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Brew chamber, Water reservoir, Control panel, Drip tray, Power button, Cup size selector, Strength control.

Feature	Description
Water Reservoir	48oz removable reservoir with handle
Brew Sizes	6oz, 8oz, 10oz programmable options
Brew Strength	Regular and Bold settings
Auto Shut-off	Turns off 2 hours after last brew
Descale Indicator	Alerts when descaling is needed
K-Cup Compatibility	Works with all Keurig K-Cup pods
Power Button	Main power on/off control
Brew Button	Initiates brewing process
Cup Size Selector	Choose between 6oz, 8oz, 10oz
Strength Control	Adjusts brew intensity

Installation & Setup

Unpack and inspect contents. Place on clean, level surface.

Remove packaging materials and stickers.
Wash water reservoir with warm, soapy water and rinse thoroughly.
Place reservoir on brewer and fill with fresh water.
Plug into grounded 120V AC outlet.
Prime the system by running water through without a K-Cup.

WARNING! Do not use without water. Keep away from heat sources and moisture.

First-Time Use

Power on brewer; allow to heat up (approx. 3 minutes).

Press POWER button - indicator light will illuminate.
Wait for READY light to turn on.
Lift handle and insert K-Cup pod.
Close handle firmly.
Place mug on drip tray.
Select cup size and press BREW button.
First brew may take longer as system completes priming.

CAUTION! Hot surfaces - use care when handling.

Specifications

Dimensions: 13.2" H x 10.2" W x 13.3" D
Water Reservoir: 48oz capacity
Brew Sizes: 6oz, 8oz, 10oz
Brew Time: Under 1 minute per cup
Power: 120V AC, 60Hz, 1470W
Weight: 8.5 lbs
Compatibility: All Keurig K-Cup pods
Warranty: 1 year limited
Auto Shut-off: 2 hours after last use

Controls and Settings

Control Panel: POWER button, BREW button, CUP SIZE (6oz, 8oz, 10oz), STRENGTH control.

Indicator Lights: POWER (blue), READY (green), ADD WATER (red), DESCALING (orange).

Brew Settings: Cup size selection, Strength adjustment (Regular/Bold), Programmable auto shut-off. Maintenance: Descaling mode, Reservoir removal, Drip tray cleaning.

Brewing Process

Step-by-step brewing instructions:

Ensure brewer is powered on and READY light is illuminated.
Lift handle to open brew chamber.
Insert K-Cup pod - no need to peel foil.
Close handle firmly until it clicks.
Place mug on drip tray (minimum 5oz capacity).
Select desired cup size (6oz, 8oz, 10oz).
Press BREW button to start brewing.
Brewing completes automatically.
Remove mug and enjoy.

Tip: For stronger coffee, use BOLD setting or smaller cup size.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Daily: Wipe exterior with damp cloth.
Weekly: Remove and wash water reservoir.
Monthly: Clean drip tray and K-Cup holder.
As needed: Descale when indicator light appears.
Needle cleaning: Use paper clip to clear brew needle if clogged.

WARNING! Unplug before cleaning. Never immerse in water.

Descaling Procedure

Descale when ADD WATER or DESCALING light appears.

Empty water reservoir.
Mix Keurig Descaling Solution with full reservoir of water.
Place large mug (16oz+) on drip tray.
Press and hold 8oz and 10oz buttons for 3 seconds to enter descale mode.
Press BREW button repeatedly until reservoir is empty.
Rinse reservoir and fill with fresh water.
Repeat brewing process with clean water 12 times to rinse.

CAUTION! Use only Keurig Descaling Solution.

Storage & Care

For extended storage or moving:

Unplug and allow to cool completely.
Empty water reservoir completely.
Run brewer with no K-Cup to clear water lines.
Clean all removable parts.
Store in dry location at room temperature.

CAUTION! Do not store with water in reservoir.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Brewer won't power on	Power connection	Check outlet; ensure plug is secure; try different outlet.
No water flow	Clogged needle/reservoir	Clean brew needle; ensure reservoir is seated properly.
Coffee too weak	Settings/water	Use BOLD setting; smaller cup size; ensure fresh water.
Descaling light on	Mineral buildup	Perform descaling procedure immediately.
Leaking water	Seals/reservoir	Check reservoir placement; inspect seals for damage.
Incomplete brew	Water level/power	Refill reservoir; check power connection.

Reset: Unplug for 2 minutes then restart.

Service: 1-866-901-BREW (2739); www.keurig.com