keurig b44 manual pdf

The Keurig B44 is a single-serve coffee brewing system featuring K-Cup pod compatibility, programmable settings, removable water reservoir, automatic shut-off, descaling alert, adjustable cup size, and energy saving mode. Designed for home and office use with 120V AC power. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Brewing chamber, Water reservoir, Control panel, Drip tray, Power button, Cup size selector.

Feature	Description
K-Cup Compatibility	Works with all Keurig K-Cup pods
Programmable Settings	Customizable brew strength and temperature
Removable Water Reservoir	48 oz capacity for easy filling and cleaning
Automatic Shut-off	Turns off 2 hours after last brew
Descaling Alert	Indicator light signals when descaling needed
Adjustable Cup Size	4oz, 6oz, 8oz, 10oz brew sizes
Energy Saving Mode	Reduces power consumption when idle
Power Button	Main power control
Brew Button	Starts brewing process
Cup Size Selector	Adjusts brew volume

Installation and Setup

Unpack and inspect contents. Place on clean, level surface.

1. Remove packaging materials and stickers
2. Wash removable water reservoir with warm water
3. Fill reservoir with fresh water and place back in unit
4. Plug into grounded 120V AC outlet
5. Prime brewing system by running water through without K-Cup

WARNING! Do not use without water in reservoir. Keep away from heat sources and moisture.

First-Time Use

Power on brewer; allow to heat up (approx. 3 minutes).

1. Press POWER button - indicator light will illuminate
2. Wait for READY light to turn on
3. Lift and close brewer handle to puncture first K-Cup
4. Place mug on drip tray
5. Select cup size and press BREW button
6. Discard first brew to clean system

CAUTION! Hot surfaces during and after brewing. Handle with care.

Specifications

• Dimensions: 13.5" H x 10.2" W x 13.2" D
• Water Reservoir: 48 oz removable
• Brew Sizes: 4oz, 6oz, 8oz, 10oz
• Power: 120V AC, 60Hz, 1470W
• Brew Time: Under 1 minute
• Weight: 8.5 lbs
• Cord Length: 30 inches
• Operating Temp: 40°F to 95°F
• Compatibility: All Keurig K-Cup pods

Controls and Settings

Control Panel: POWER button, BREW button, Cup Size buttons, Add Water indicator, Descaling indicator.

Programming: Hold desired cup size button for 3 seconds to set as default. Auto-off can be disabled by holding POWER for 3 seconds.

Brew Strength: Standard and Strong settings available. Temperature: Adjustable from 187°F to 192°F through programming menu.

Brewing Process

Step-by-step brewing instructions:

1. Ensure water reservoir is filled
2. Press POWER button to turn on
3. Wait for READY light
4. Lift brewer handle
5. Insert K-Cup pod
6. Close handle firmly
7. Place mug on drip tray
8. Select cup size
9. Press BREW button
10. Brewing completes automatically

Tip: Preheat mug with hot water for better temperature retention.

Maintenance and Cleaning

Regular maintenance ensures optimal performance.

1. Daily: Wipe exterior with damp cloth
2. Weekly: Clean water reservoir and drip tray
3. Monthly: Run vinegar solution through brewing system
4. As needed: Descale when indicator light appears
5. Replace water filter every 2 months

WARNING! Unplug before cleaning. Never immerse in water.

Descaling Procedure

Required every 3-6 months depending on water hardness.

1. Mix Keurig descaling solution with water
2. Pour into empty water reservoir
3. Place large mug on drip tray
4. Press and hold 8oz and 10oz buttons for 3 seconds
5. Press BREW button repeatedly until reservoir is empty
6. Rinse reservoir and fill with fresh water
7. Repeat brewing process 12 times to rinse

CAUTION! Use only Keurig descaling solution.

Care Instructions

Unplug before cleaning. Use mild detergent and soft cloth only.

CAUTION! Do not use abrasive cleaners. Keep water reservoir away from dishwasher heat.

Regulatory Information

UL Listed: Certified for safety standards. FCC Part 15: Class B digital device compliance. Copyright © 2025 Keurig Green Mountain, Inc. All rights reserved. For support, visit www.keurig.com or contact 1-866-901-2739.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Brewer won't turn on	Power connection	Check power cord; ensure outlet works; reset circuit breaker.
No water flow	Clogged needle/reservoir	Descale brewer; check water reservoir placement; clean exit needle.
Weak coffee	Brew settings/water temp	Select STRONG brew; adjust temperature settings; use fresh K-Cup.
Leaking water	Seals/reservoir	Check reservoir seals; ensure proper placement; inspect water tank.
Descaling light on	Mineral buildup	Perform descaling procedure; use filtered water.

Reset: Unplug for 2 minutes then restart.

Service: 1-866-901-2739; www.keurig.com