keurig b77 manual download

The Keurig B77 is a premium single-serve coffee brewing system with programmable features, large water reservoir, multiple cup size options, energy saving mode, descaling alert system, and compatibility with all K-Cup pods. This manual provides comprehensive guidance for setup, operation, maintenance, and troubleshooting of your Keurig B77 brewer.

Key Features

Main components: Brewing unit, 80oz water reservoir, digital display, control buttons, drip tray, K-Cup pod holder.

Unpacking and Setup

Remove all packaging materials and inspect contents.

1. Remove packaging: Take brewer and accessories out of box, remove all tape and stickers.
2. Place brewer: Position on flat, stable surface away from heat sources and water.
3. Install water filter: Rinse filter, insert into reservoir, soak for 5 minutes.
4. Fill reservoir: Remove reservoir, fill with fresh cold water, reinstall.
5. Plug in: Connect to 120V AC outlet, power on brewer.

WARNING! Do not operate without water in reservoir. Keep away from children.

First-Time Use

Prime the brewing system before first use.

1. Power on: Press POWER button, wait for ready indicator.
2. Prime system: Lift and close brew handle without pod, run water through system.
3. Brew first cup: Insert K-Cup pod, select brew size, press brew button.
4. Program settings: Set clock, auto-off, and preferred brew sizes.
5. Test features: Verify all buttons and functions work properly.

CAUTION! First few brews may contain manufacturing residues - discard.

Technical Specifications

• Dimensions: 13.5" W x 10.2" D x 13.2" H
• Water Reservoir: 80oz capacity
• Power: 120V AC, 60Hz, 1470W
• Brew Sizes: 4oz, 6oz, 8oz, 10oz, 12oz
• Brew Time: Under 1 minute
• Temperature: 192°F optimal brewing temperature
• Weight: 9.5 lbs
• Warranty: 1 year limited

Control Panel Functions

Digital display shows status, settings, and alerts.

Buttons: POWER, BREW, CUP SIZE (4oz, 6oz, 8oz, 10oz, 12oz), STRENGTH, HOT WATER, MENU, SELECT.

Display Indicators: READY, HEATING, ADD WATER, DESCALING, AUTO OFF. Menu Options: Clock setting, Auto on/off times, Brew temperature, Energy saver settings, Factory reset.

Brewing Process

Simple steps for perfect coffee every time.

1. Ensure READY light is illuminated
2. Lift brew handle and insert K-Cup pod
3. Close brew handle firmly
4. Place mug on drip tray
5. Select desired cup size
6. Press BREW button
7. Brewing completes automatically

Tip: Preheat mug with hot water for optimal temperature.

Maintenance and Cleaning

Regular maintenance ensures optimal performance.

1. Daily: Wipe exterior with damp cloth
2. Weekly: Clean drip tray and K-Cup holder
3. Monthly: Descale brewing system
4. Quarterly: Replace water filter
5. As needed: Clean water reservoir

WARNING! Unplug brewer before cleaning. Never immerse in water.

Descaling Procedure

Required when descale indicator appears.

1. Prepare solution: Mix Keurig descaling solution with water
2. Pour into empty reservoir
3. Initiate descale mode: Hold 4oz and 10oz buttons for 3 seconds
4. Run descaling cycles until reservoir empty
5. Rinse thoroughly with fresh water
6. Brew 2-3 cycles of plain water to flush

CAUTION! Use only Keurig descaling solution. Follow instructions carefully.

Programming Options

Customize your brewer to suit your preferences.

Clock Setting: Press MENU, navigate to CLOCK, set time. Auto On/Off: Program specific times for automatic operation. Brew Temperature: Adjust from 187°F to 192°F. Energy Saver: Set auto-off delay from 5 minutes to 2 hours. Default Brew Size: Set preferred cup size for one-touch brewing.

Troubleshooting Guide

Reset: Unplug for 2 minutes, then restart.

Service: 1-866-901-2739; www.keurig.com