Keurig Classic Manual

The Keurig Classic is a single-serve coffee brewing system designed for home use, featuring multiple cup size options, removable water reservoir, automatic shut-off, descaling function, and compatibility with K-Cup pods. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Brewing Process 7. Maintenance & Cleaning 8. Descaling Procedure 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Water reservoir, K-Cup pod holder, Drip tray, Power button, Brew size buttons, Display screen.

Feature	Description
Water Reservoir	Removable 48oz capacity for easy filling
Brew Size Options	6oz, 8oz, 10oz cup sizes
K-Cup Pod Holder	Accepts all K-Cup pod varieties
Auto Shut-off	Turns off automatically after 2 hours
Descale Indicator	Alerts when descaling is needed
Power Button	Turns brewer on/off
Brew Buttons	Select cup size for brewing
Drip Tray	Removable for cleaning
Display Screen	Shows status and alerts
Energy Saving	Low power consumption mode

Installation

Unpack and inspect contents. Place on clean, stable surface.

Remove all packaging materials from brewer and components.
Place brewer on level, stable countertop away from heat sources.
Install water reservoir: Align and push into place until it clicks.
Plug into standard 120V AC power outlet.

WARNING! Do not use damaged components. Ensure brewer is on stable surface to prevent tipping.

First-Time Setup

Prime the brewing system before first use.

Fill water reservoir with fresh cold water.
Plug in brewer and press POWER button.
Allow brewer to heat up (approximately 3 minutes).
Brew water-only cycle without K-Cup pod to clean system.
Select brew size and begin brewing process.

CAUTION! Use only cold, filtered water. Do not use distilled water.

Specifications

Dimensions: 13.3" H x 10.2" W x 13.0" D
Water Reservoir: 48 oz removable
Brew Sizes: 6oz, 8oz, 10oz
Power: 120V AC, 60Hz, 1470W
Heat-up Time: Less than 3 minutes
Auto Shut-off: 2 hours after last brew
Weight: 7.5 lbs
Compatibility: All K-Cup pods
Warranty: 1 year limited

Controls and Settings

Front panel controls: POWER, 6oz, 8oz, 10oz brew buttons.

Display Indicators: Power on, Heating, Ready to brew, Add water, Descaling needed.

Brew Size Selection: Press corresponding button for desired cup size. Auto Shut-off: Brewer turns off automatically after 2 hours of inactivity. Descaling Mode: Activated when descale indicator lights. Water Level Indicator: Shows approximate water level in reservoir.

Brewing Process

Simple steps for perfect single-serve brewing.

Lift handle to open K-Cup pod holder.
Insert K-Cup pod and close handle firmly.
Place mug on drip tray.
Press desired brew size button (6oz, 8oz, 10oz).
Brewing begins automatically; completes in under 1 minute.
Remove mug and enjoy.
Eject used K-Cup pod by opening handle.

Tip: Preheat mug with hot water for hotter coffee.

Maintenance & Cleaning

Regular cleaning ensures optimal performance.

Unplug brewer before cleaning.
Wipe exterior with damp cloth; do not immerse in water.
Remove and clean water reservoir weekly.
Clean drip tray and K-Cup pod holder regularly.
Descale every 3-6 months depending on water hardness.

CAUTION! Never use abrasive cleaners or immerse brewer in water.

Descaling Procedure

Essential maintenance to remove mineral buildup.

Fill reservoir with descaling solution or white vinegar and water mixture.
Place large mug on drip tray.
Press and hold 6oz and 10oz buttons simultaneously for 3 seconds to enter descale mode.
Press brew button to start descaling cycle.
Repeat brewing until reservoir is empty.
Rinse reservoir and run 2-3 cycles with fresh water.

WARNING! Follow descaling instructions carefully to avoid damage.

Regulatory Information

UL listed; FCC Part 15 compliant. Copyright © 2025 Keurig Green Mountain, Inc. All rights reserved. For support, visit www.keurig.com or contact 1-866-901-2739. This device complies with part 15 of the FCC Rules.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Brewer won't turn on	Power connection	Check power cord; ensure outlet works; press POWER button.
No water flow	Clogged needle/reservoir	Check water reservoir placement; clean exit needle.
Coffee too weak	Brew size/water temperature	Use smaller cup size; ensure proper heating cycle.
Leaking water	Loose connections	Check reservoir seal; ensure K-Cup holder closed properly.
Descale light on	Mineral buildup	Perform descaling procedure immediately.

Reset: Unplug for 30 seconds, then restart.

Service: 1-866-901-2739; www.keurig.com