Keurig Coffee Machine Manual

The Keurig Coffee Machine is a single-serve brewing system featuring multiple cup size options, programmable settings, water reservoir, removable drip tray, descaling function, energy saving mode, and compatibility with K-Cup pods. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Brewing Coffee 7. Maintenance & Cleaning 8. Descaling Process 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Water reservoir, K-Cup pod holder, Drip tray, Control panel, Power button, Cup size selection.

Feature	Description
Water reservoir	Removable tank for easy filling and cleaning
K-Cup pod holder	Chamber for inserting coffee pods
Drip tray	Removable tray to catch spills and drips
Control panel	Digital display with brew size options
Power button	Turns machine on/off
Cup size selection	4oz, 6oz, 8oz, 10oz brew sizes
Programmable settings	Auto on/off, temperature control
Descale indicator	Light alerts when descaling is needed
Energy saving mode	Automatically powers down after 2 hours
Hot water button	Dispenses hot water without pod

Installation

Unpack and inspect contents. Place on clean, level surface.

Remove all packaging materials and stickers.
Wash water reservoir with warm, soapy water and rinse thoroughly.
Place machine on stable, level counter away from edges.
Fill reservoir with fresh cold water and reinstall.
Plug into grounded electrical outlet.

WARNING! Do not use without water in reservoir. Keep away from children.

First-Time Setup

Prime the machine before first use.

Press power button to turn on machine.
Wait for heating cycle to complete (approx. 3 minutes).
Place large mug on drip tray.
Press brew button without inserting pod to run water through system.
Repeat brewing cycle 2-3 times with fresh water.
Machine is now ready for use.

CAUTION! Water and surfaces may be hot during operation.

Specifications

Dimensions: 13.5" H x 10.2" W x 13.2" D
Water Reservoir: 60 oz removable tank
Brew Sizes: 4oz, 6oz, 8oz, 10oz
Brew Time: Under 1 minute
Power: 120V AC, 60Hz, 1470W
Temperature: 192°F optimal brewing temperature
Compatibility: All K-Cup pods
Weight: 8.5 lbs
Warranty: 1 year limited

Controls and Settings

Access settings via control panel buttons and display.

Control Panel: Power, Brew, Cup Size (4oz, 6oz, 8oz, 10oz), Hot Water, Program, Auto On/Off.

Settings: Brew temperature (low/medium/high), Auto off (2hr/4hr/off), Water filter indicator, Descaling mode, Factory reset. Programmable: Set auto-brew time, customize cup sizes, water filter reminder.

Brewing Coffee

Simple steps for perfect coffee every time.

Lift handle and insert K-Cup pod into holder.
Close handle firmly until it clicks.
Place mug on drip tray.
Select desired cup size (4oz, 6oz, 8oz, 10oz).
Press brew button.
Brewing completes automatically.
Lift handle to eject used pod.

Tip: For stronger coffee, use smaller cup size setting.

Maintenance & Cleaning

Regular cleaning ensures optimal performance.

Daily: Wipe exterior with damp cloth.
Weekly: Remove and wash drip tray and water reservoir.
Monthly: Clean needle with paper clip to prevent clogs.
As needed: Descale when indicator light appears.

CAUTION! Unplug machine before cleaning. Never immerse in water.

Descaling Process

Remove mineral buildup every 3-6 months.

Empty water reservoir and fill with descaling solution.
Place large container on drip tray.
Press and hold 8oz and 10oz buttons for 3 seconds to enter descale mode.
Press brew button to start descaling cycle.
Repeat brewing until reservoir is empty.
Rinse reservoir and fill with fresh water.
Run 2-3 brewing cycles with fresh water to rinse.

WARNING! Use only Keurig descaling solution.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't turn on	Power connection	Check power cord; ensure outlet works; reset circuit breaker.
No water flow	Clogged needle/reservoir	Clean exit needle; ensure reservoir seated properly.
Weak coffee	Cup size setting	Use smaller cup size; ensure fresh pods.
Leaking water	Loose connections	Check reservoir seal; ensure handle closed completely.
Descale light on	Mineral buildup	Perform descaling procedure.
Machine beeps	Error condition	Unplug for 2 minutes; check water level; restart.

Reset: Unplug for 2 minutes then restart.

Service: 1-866-901-2739; www.keurig.com