Keurig Coffee Maker Manual Instruction

The Keurig Coffee Maker is a single-serve brewing system featuring multiple cup size options, water reservoir, removable drip tray, descaling function, programmable settings, energy saving mode, and compatibility with K-Cup pods. Powered by 120V AC, 60Hz. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Water reservoir, K-Cup pod holder, Drip tray, Control panel, Power button, Cup size selection buttons.

Installation

Unpack and inspect contents. Place on clean, level surface.

1. Remove packaging materials: Remove all tape and protective covers.
2. Wash removable parts: Clean water reservoir and drip tray with warm water.
3. Fill water reservoir: Add fresh cold water to maximum fill line.
4. Plug into AC power outlet.
5. Prime the system: Run water through without pod for initial setup.

WARNING! Keep away from heat sources and water. Do not immerse in water.

First-Time Setup

Power on brewer; follow initial setup procedure.

1. Prime the brewing system: Press power button, select largest cup size without pod.
2. Set auto-off timing: Press and hold power button to cycle through 2-hour, 5-minute, or off options.
3. Program preferred settings: Set default cup size and temperature if available.
4. Test brew: Insert K-Cup pod and brew first cup.

CAUTION! Use only Keurig-approved pods and accessories.

Specifications

• Brew Sizes: 6oz, 8oz, 10oz options
• Water Reservoir: 48oz removable tank
• Power: 120V AC, 60Hz, 1500W
• Dimensions: 13.3" H x 9.8" W x 13.0" D
• Weight: 9.5 lbs
• Brew Time: Under 1 minute
• Temperature: 192°F optimal brewing temperature
• Compatibility: All Keurig K-Cup pods
• Warranty: 1-year limited warranty

Controls and Settings

Access settings via control panel. Front buttons: POWER, 6oz, 8oz, 10oz brew sizes.

Display indicators: Power, Heating, Ready to Brew, Add Water, Descaling alert.

Brew settings: Cup size selection (6oz, 8oz, 10oz). System settings: Auto-off timing (2 hours, 5 minutes, off). Maintenance: Descaling mode, factory reset. Temperature: Some models feature adjustable brew temperature.

Brewing Process

Brews single cups using K-Cup pods.

1. Lift handle: Open K-Cup pod holder.
2. Insert pod: Place K-Cup in chamber.
3. Close handle: Firmly close until click.
4. Place cup: Position mug on drip tray.
5. Select size: Press desired brew size button.
6. Brew begins: Coffee dispenses automatically.
7. Remove pod: Open handle after brewing to eject used pod.

Tip: For stronger coffee, use smaller cup size setting.

Maintenance & Cleaning

Regular cleaning ensures optimal performance and coffee flavor.

1. Daily: Wipe exterior with damp cloth.
2. Weekly: Remove and wash water reservoir and drip tray.
3. Monthly: Clean needle and pod holder area.
4. As needed: Descale when indicator light appears.

CAUTION! Unplug before cleaning. Do not use abrasive cleaners.

Descaling Procedure

Required every 3-6 months to remove mineral buildup.

1. Prepare solution: Mix Keurig descaling solution with water or use vinegar solution.
2. Fill reservoir: Pour descaling solution into water tank.
3. Enter descale mode: Press and hold appropriate buttons as per model instructions.
4. Run brew cycles: Dispense solution through system without pod.
5. Rinse thoroughly: Run multiple cycles with fresh water to flush system.

WARNING! Follow descaling instructions precisely to avoid damage.

Regulatory Information

UL listed; complies with FCC Part 15 Class B. Copyright © Keurig Green Mountain, Inc. For support, visit www.keurig.com or contact 1-866-901-2739. This device complies with part 15 of the FCC Rules.

Troubleshooting

Reset: Unplug for 2 minutes, then restart.

Service: 1-866-901-2739; www.keurig.com