Keurig Coffee Maker Operating Manual

The Keurig Coffee Maker is a single-serve brewing system that uses K-Cup pods to brew coffee, tea, hot chocolate, and other beverages. Features include multiple brew sizes, programmable settings, auto on/off, descale indicator, removable water reservoir, drip tray, and compatibility with various K-Cup varieties. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Initial Setup 3. Brewing Instructions 4. Specifications 5. Controls and Settings 6. Maintenance and Cleaning 7. Descaling Procedure 8. Programming Options 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Brew chamber, Water reservoir, Drip tray, Control panel, Power button, K-Cup holder.

Feature	Description
Brew chamber	Holds and punctures K-Cup pods for brewing
Water reservoir	Removable tank for water storage (48oz capacity)
Drip tray	Adjustable tray to accommodate various cup sizes
Control panel	Touch buttons for brew size selection and settings
Power button	Turns brewer on/off
K-Cup holder	Accepts all K-Cup pod varieties
Brew size options	6oz, 8oz, 10oz cup sizes
Descale indicator	LED light alerts when descaling is needed
Auto off	Automatically turns off after 2 hours of inactivity
Programmable settings	Adjustable temperature and brew strength

Initial Setup

Unpack and inspect contents. Place on clean, stable surface.

Remove all packaging materials and stickers.
Wash removable water reservoir with warm, soapy water and rinse thoroughly.
Fill reservoir with fresh cold water and place back on brewer.
Plug into 120V AC power outlet.
Prime the system by running water-only brews through all cup sizes.

WARNING! Do not use without water in reservoir. Keep away from heat sources and moisture.

Brewing Instructions

Power on brewer; wait for ready indicator.

Lift handle to open brew chamber.
Insert K-Cup pod into holder and close handle firmly.
Place mug on drip tray (remove for travel mugs).
Select desired brew size (6oz, 8oz, 10oz).
Press brew button to start brewing cycle.
Wait for complete dispensing before removing mug.

CAUTION! Hot surfaces! Use care when handling freshly brewed beverages.

Specifications

Capacity: 48oz water reservoir
Brew Sizes: 6oz, 8oz, 10oz
Brew Time: Under 1 minute per cup
Power: 120V AC, 60Hz, 1500W
Dimensions: 13.5" H x 10.2" W x 13.2" D
Weight: 7.5 lbs
Compatibility: All K-Cup pod varieties
Warranty: 1-year limited
Water Filter: Compatible with Keurig water filter

Controls and Settings

Access settings via control panel buttons. Power: Turns brewer on/off. Brew Size: 6oz, 8oz, 10oz options.

Programming: Hold brew button for 3 seconds to enter programming mode for temperature and strength settings.

Temperature Settings: Low, Medium, High. Brew Strength: Regular, Strong. Auto Off: Enabled by default (2 hours). Descale Indicator: Red light when maintenance required. Water Filter Reminder: Programmable filter change alert.

Maintenance and Cleaning

Daily: Wipe exterior with damp cloth. Weekly: Clean water reservoir and drip tray.

Unplug brewer and allow to cool completely.
Remove and wash water reservoir, lid, and drip tray.
Clean brew chamber with damp cloth - do not immerse in water.
Run water-only brew cycle to rinse internal system.
Replace water filter every 2 months or 60 tank refills.

Tip: Use filtered water to reduce mineral buildup and extend brewer life.

Descaling Procedure

Required when descale indicator lights or every 3-6 months.

Empty water reservoir and fill with Keurig descaling solution or white vinegar.
Place large mug on drip tray.
Press and hold 8oz and 10oz buttons simultaneously for 3 seconds.
Follow on-screen prompts to run descaling cycles.
Rinse thoroughly with multiple water-only brews.
Reset descale indicator by holding power button for 5 seconds.

WARNING! Use only Keurig descaling solution or white vinegar. Rinse thoroughly after descaling.

Programming Options

Customize brewer settings to personal preference.

Brew Temperature: Adjust from 187°F to 192°F. Brew Strength: Regular or strong setting. Auto Off: Enable/disable 2-hour auto shutoff. Water Filter Reminder: Set filter replacement schedule. Factory Reset: Restore all default settings.

Care & Storage

Unplug before cleaning or storage. Store in dry location away from direct sunlight.

CAUTION! Do not immerse brewer in water. Empty water reservoir before extended storage.

Regulatory Information

UL Listed: Certified for safety standards. FCC Part 15: Class B digital device compliance. Copyright © 2025 Keurig; trademarks of Keurig Green Mountain, Inc. For support, visit www.keurig.com or contact 1-866-901-2739.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Brewer won't turn on	Power connection	Check power cord connection; ensure outlet is working.
No water flow	Empty reservoir/needles clogged	Refill water reservoir; clean exit needle with paper clip.
Weak coffee	Brew strength setting	Change to strong brew setting; use different K-Cup variety.
Leaking water	Loose connections	Ensure reservoir properly seated; check all seals.
Descale light on	Mineral buildup	Perform descaling procedure; reset indicator.
Incomplete brew	Clogged needles	Clean entrance and exit needles; run water-only cycles.

Reset: Unplug for 30 seconds then restart.

Service: 1-866-901-2739; www.keurig.com