Keurig Elite B40 Owners Manual

The Keurig Elite B40 is a single-serve coffee brewing system featuring programmable settings, multiple cup sizes, removable water reservoir, energy saving mode, descale indicator, and compatibility with all K-Cup pods. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Brewing system, Removable 48oz water reservoir, LCD display, Control panel, Drip tray, K-Cup pod holder.

Installation

Unpack and inspect contents. Place on clean, stable surface.

1. Remove all packaging materials and stickers.
2. Wash removable water reservoir with warm, soapy water.
3. Place brewer on level, heat-resistant surface.
4. Fill reservoir with fresh water and reinstall.
5. Plug into 120V AC power outlet.

WARNING! Do not use abrasive cleaners. Keep away from heat sources and water.

First-Time Setup

Power on brewer; follow initial setup procedure.

1. Prime the system: Press power button, run water through without K-Cup pod.
2. Program cup sizes: Use cup size selector to set preferred brew sizes.
3. Set clock: Use programming buttons to set current time.
4. Test brew: Insert K-Cup pod and brew first cup.

CAUTION! First few brews may contain manufacturing residues - discard first 2-3 cups.

Specifications

• Dimensions: 13.3" H x 10.2" W x 13.1" D
• Water Reservoir: 48oz capacity
• Brew Sizes: 6oz, 8oz, 10oz
• Power: 120V AC, 60Hz, 1470W
• Brew Time: Under 1 minute
• Weight: 7.5 lbs
• Warranty: 1 year limited
• Compatibility: All K-Cup pod varieties

Controls and Settings

Access functions via control panel. Front Panel: POWER, BREW, CUP SIZE SELECTOR, PROGRAM.

LCD Display: Shows time, brew status, alerts, and programming options.

Programming: Clock setting, auto on/off, cup size memory, energy saving mode. Settings: Brew temperature control, descale reminder interval, language selection.

Brewing Process

Supports all K-Cup pod varieties including coffee, tea, and hot cocoa.

1. Lift handle: Open K-Cup pod compartment.
2. Insert pod: Place K-Cup in holder, close handle firmly.
3. Place cup: Position mug on drip tray.
4. Select size: Choose 6oz, 8oz, or 10oz brew size.
5. Brew: Press BREW button to start cycle.
6. Remove pod: Open handle after brewing to eject used pod.

WARNING! Do not open handle during brewing cycle. Hot water can cause burns.

Maintenance & Cleaning

Regular cleaning ensures optimal performance and beverage quality.

1. Daily: Wipe exterior with damp cloth.
2. Weekly: Clean water reservoir and drip tray.
3. Monthly: Clean needle and pod holder area.
4. As needed: Descale when indicator lights.

CAUTION! Unplug brewer before cleaning. Never immerse in water.

Descaling Procedure

Required every 3-6 months depending on water hardness.

1. Prepare solution: Mix Keurig descaling solution or white vinegar with water.
2. Fill reservoir: Pour descaling solution into water reservoir.
3. Start descale: Press and hold 6oz and 10oz buttons for 3 seconds.
4. Brew cycles: Run multiple brew cycles without K-Cup pods.
5. Rinse: Fill with fresh water and run 2-3 rinse cycles.

WARNING! Use only Keurig descaling solution or food-grade vinegar.

Care & Storage

Unplug and empty water reservoir before extended storage. Store in cool, dry place.

CAUTION! Do not store with water in reservoir. Protect from freezing temperatures.

Regulatory Information

UL listed; complies with FCC Part 15. Copyright © 2025 Keurig Green Mountain, Inc. All rights reserved. For support, visit www.keurig.com or contact 1-866-901-2739.

Troubleshooting

Reset: Unplug for 2 minutes then restart.

Service: 1-866-901-2739; www.keurig.com