Keurig Elite Brewing System Manual

The Keurig Elite Brewing System is a single-serve coffee maker designed for home and office use, featuring multiple brew sizes, automatic shut-off, removable drip tray for travel mugs, descale indicator, energy-saving mode, and compatibility with all K-Cup pods. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Brewing Process 7. Maintenance & Cleaning 8. Descaling Procedure 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Water reservoir, K-Cup pod holder, Drip tray, Control panel, Power button, Brew size buttons.

Feature	Description
Water Reservoir	48 oz removable reservoir for easy filling
Brew Sizes	6 oz, 8 oz, 10 oz brew size options
K-Cup Pod Holder	Accepts all K-Cup pod varieties
Removable Drip Tray	Accommodates travel mugs up to 7.2 inches
Auto Shut-Off	Turns off 90 seconds after last brew
Descale Indicator	Alerts when descaling is needed
Energy Saving Mode	Reduces energy consumption when not in use
Power Button	Main power control
Brew Buttons	Dedicated buttons for each brew size
Water Filter Compatible	Works with Keurig water filter kits

Installation & Setup

Unpack and inspect contents. Place on stable, level surface.

Remove all packaging materials and stickers.
Wash water reservoir with warm, soapy water and rinse thoroughly.
Place brewer on stable, level counter away from heat sources.
Fill reservoir with fresh cold water and replace on brewer.
Plug into 120V AC power outlet.

WARNING! Do not use without water. Ensure brewer is on level surface to prevent spills.

First-Time Use

Prime the brewing system before first use.

Press power button to turn on brewer.
Lift and close brew handle without K-Cup pod.
Place mug on drip tray.
Press 10 oz brew button to run water through system.
Repeat priming process 2-3 times with fresh water.
Brewer is now ready for first K-Cup pod.

CAUTION! Water will be hot during priming. Keep hands clear of exit needle.

Specifications

Dimensions: 13.5" H x 10.2" W x 13.2" D
Water Reservoir: 48 oz capacity
Brew Sizes: 6 oz, 8 oz, 10 oz
Power: 120V AC, 60Hz, 1470W
Auto Shut-Off: 90 seconds after last brew
Weight: 7.5 lbs
Compatibility: All K-Cup pods
Warranty: 1 year limited
Color Options: Black, White, Stainless Steel

Controls and Settings

Control Panel: POWER button, 6 oz, 8 oz, 10 oz brew buttons, Add Water indicator.

Brew Size Selection: Press corresponding button for desired cup size. Power Management: Auto shut-off activates after 90 seconds of inactivity. Water Level Indicator: Add Water light illuminates when reservoir is low. Descale Alert: Descaling required indicator lights when mineral buildup detected.

Brewing Process

Simple three-step brewing process.

Lift brew handle and insert K-Cup pod.
Close brew handle firmly until it clicks.
Place mug on drip tray (remove tray for travel mugs).
Press desired brew size button (6 oz, 8 oz, 10 oz).
Brewing completes automatically in under 60 seconds.
Lift handle to eject used pod into storage compartment.

Tip: For stronger coffee, use smaller brew size with same K-Cup pod.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Daily: Wipe exterior with damp cloth.
Weekly: Clean water reservoir and drip tray.
Monthly: Clean exit needle with paper clip.
As needed: Descale when indicator light activates.
Pod Storage: Empty used pod container regularly.

CAUTION! Unplug brewer before cleaning. Never immerse in water.

Descaling Procedure

Required every 3-6 months depending on water hardness.

Purchase Keurig Descaling Solution or white vinegar.
Fill reservoir with descaling solution and water (50/50 mix).
Place large mug on drip tray.
Press power and brew buttons simultaneously for 3 seconds.
Press 10 oz brew button repeatedly until reservoir is empty.
Rinse reservoir and fill with fresh water.
Repeat brewing process 5-6 times to rinse system.
Descale light will turn off when process is complete.

WARNING! Use only Keurig descaling solution or white vinegar. Follow instructions carefully.

Regulatory Information

UL listed; complies with FCC Part 15 Class B. Copyright © Keurig Green Mountain, Inc. For support, visit www.keurig.com or contact 1-866-901-2739. This brewer is designed for household use only. Not for commercial applications.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Brewer won't power on	Power connection	Check power cord connection; ensure outlet is working
No water flow	Clogged needle/reservoir	Clean exit needle; ensure reservoir is properly seated
Small cup volume	Mineral buildup	Descale brewer; check water filter
Leaking water	Loose connections	Check reservoir seal; ensure all parts are properly connected
Coffee tastes weak	Brew size/water quality	Use smaller brew size; try filtered water
Descale light on	Mineral buildup	Perform descaling procedure immediately

Reset: Unplug for 30 seconds then restart.

Service: 1-866-901-2739; www.keurig.com