Keurig Elite Manual B40

The Keurig Elite B40 is a single-serve coffee brewing system designed for home use, featuring programmable settings, multiple brew sizes, auto on/off function, removable water reservoir, and compatibility with K-Cup pods. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Brewing Process 7. Maintenance & Cleaning 8. Descaling Procedure 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Brew chamber, Water reservoir, Drip tray, Control panel, Power base.

Feature	Description
Brew Sizes	6oz, 8oz, 10oz programmable options
Water Reservoir	48oz removable reservoir with handle
Auto On/Off	Programmable auto shut-off (2 hours)
Brew Temperature	192°F optimal brewing temperature
Power Base	Cord storage and stable platform
Control Panel	LED display with simple button controls
Drip Tray	Adjustable height accommodates various mug sizes
K-Cup Compatibility	Works with all K-Cup pod varieties
Descale Indicator	LED alert when descaling is required
Energy Efficient	Energy Star certified

Installation

Unpack and inspect all components. Place on clean, stable surface.

Remove packaging materials and stickers from brewer
Wash water reservoir with warm, soapy water and rinse thoroughly
Place drip tray in position and ensure it's properly seated
Fill reservoir with fresh cold water and reinstall on brewer
Plug into 120V AC outlet

WARNING! Do not use without water in reservoir. Keep away from heat sources and moisture.

First-Time Setup

Prime the brewing system before first use.

Ensure water reservoir is filled and properly seated
Plug in brewer - control panel will illuminate
Without K-Cup pod, place mug on drip tray
Press and hold 8oz brew button until brewing starts
Allow complete brew cycle to finish (brews hot water only)
Repeat process 2-3 times to prime system
Brewer is now ready for first coffee brew

CAUTION! Water will be hot. Do not touch during brewing cycle.

Specifications

Dimensions: 13.2" H x 10.2" W x 13.3" D
Water Reservoir: 48oz capacity
Brew Sizes: 6oz, 8oz, 10oz
Brew Time: Under 1 minute
Power: 120V AC, 60Hz, 1470W
Weight: 7.5 lbs
Warranty: 1 year limited
Certifications: UL, Energy Star
Operating Temp: 40°F to 95°F

Controls and Settings

Control Panel: POWER button, 6oz/8oz/10oz brew buttons, ADD WATER indicator, DESCALE indicator.

Programming: Hold desired brew size button for 3 seconds until light flashes to set default size. Auto Off: Press and hold POWER for 3 seconds to enable/disable auto shut-off (2 hours).

Indicator Lights: Green - ready to brew; Flashing - heating/brewing; Red - add water/descaling required.

Brewing Process

Simple one-touch brewing with K-Cup pods.

Lift handle to open brew chamber
Insert K-Cup pod (any variety)
Close handle firmly until it clicks
Place mug on drip tray (adjust height if needed)
Select desired brew size (6oz, 8oz, 10oz)
Brewing begins automatically - completes in under 1 minute
Remove mug and enjoy
K-Cup pod ejects automatically when handle is lifted

Tip: For stronger coffee, use smaller brew size with same K-Cup pod.

Maintenance & Cleaning

Regular cleaning ensures optimal performance and coffee flavor.

Daily: Wipe exterior with damp cloth
Weekly: Remove and wash drip tray and reservoir
Monthly: Clean brew chamber with damp cloth
As needed: Run water-only brew cycles to flush system
Every 2-3 months: Descaling procedure required

CAUTION! Unplug brewer before cleaning. Do not immerse in water.

Descaling Procedure

Required when DESCALE indicator lights or every 2-3 months.

Prepare Keurig descaling solution or white vinegar mixture
Empty water reservoir and fill with descaling solution
Place large mug or container on drip tray
Press and hold 8oz and 10oz buttons simultaneously for 3 seconds
Brew multiple cycles until reservoir is empty
Rinse reservoir thoroughly and fill with fresh water
Brew multiple water-only cycles to rinse system
Descale indicator will turn off when complete

WARNING! Use only Keurig descaling solution or recommended alternatives.

Regulatory Information

UL Listed: Complies with UL 197 safety standards. Energy Star Certified: Meets energy efficiency guidelines. FCC Part 15: Class B digital device compliant. Copyright © 2025 Keurig Green Mountain, Inc. All rights reserved. For support, visit www.keurig.com or contact 1-866-901-2739.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Brewer won't turn on	Power connection	Check power cord; ensure outlet is working; reset circuit breaker.
No water flow	Clogged needle/reservoir	Check water reservoir seating; clean exit needle; descale system.
Weak coffee stream	Mineral buildup	Descale immediately; check water quality.
Brewer leaks	Seals/reservoir	Check reservoir seal; ensure proper handle closure; inspect internal seals.
Incomplete brewing	K-Cup/power	Ensure K-Cup properly inserted; check power stability; reset brewer.

Reset: Unplug for 2 minutes then restart.

Service: 1-866-901-2739; www.keurig.com