keurig instruction manual b31

The Keurig B31 is a single-serve coffee brewing system designed for home use, featuring multiple cup size options, removable water reservoir, descaling function, programmable settings, energy saving mode, and compatibility with K-Cup pods. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Removable water reservoir, K-Cup pod holder, drip tray, control panel, power button, brew size buttons, display screen.

Installation

Unpack and inspect contents. Place on clean, level surface.

1. Remove all packaging materials and stickers
2. Wash removable water reservoir with warm soapy water
3. Place brewer on stable, level countertop
4. Fill reservoir with fresh cold water
5. Plug into standard 120V AC outlet

WARNING! Do not use without water in reservoir. Keep away from heat sources and moisture.

First-Time Setup

Power on brewer; follow initial setup procedure.

1. Prime the system: Press power button, run water through without pod
2. Set clock: Use menu to set current time
3. Program brew sizes: Select preferred cup sizes (6oz, 8oz, 10oz)
4. Set auto-off: Configure energy saving mode (90 seconds default)
5. Test brew: Insert K-Cup and brew first cup

CAUTION! First few brews may contain manufacturing residue - discard first 2-3 cups.

Specifications

• Dimensions: 13.5" H x 10.2" W x 13.2" D
• Water Reservoir: 48oz capacity
• Power: 120V AC, 60Hz, 1470W
• Brew Sizes: 6oz, 8oz, 10oz
• Brew Time: Under 1 minute
• Weight: 8.5 lbs
• Display: LCD with backlight
• Pod Compatibility: All K-Cup varieties
• Warranty: 1 year limited

Controls and Settings

Access settings via control panel buttons and LCD display.

Control Panel: POWER, 6oz, 8oz, 10oz, MENU, SELECT, BREW

Settings Menu: Clock setting, Auto-off timing (90 sec default), Brew temperature, Factory reset, Descaling mode. Programming: Hold brew size button for 3 seconds to set custom volume. Display shows: Ready status, Heating, Add water, Descaling alert, Clock.

Brewing Process

Simple one-cup brewing with K-Cup pods.

1. Lift handle to open K-Cup chamber
2. Insert K-Cup pod (any variety)
3. Close handle firmly until it clicks
4. Place mug on drip tray
5. Select brew size (6oz, 8oz, 10oz)
6. Press BREW button
7. Brewing completes automatically
8. Remove used pod after brewing

Tip: Preheat mug with hot water for optimal temperature.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

1. Daily: Wipe exterior with damp cloth
2. Weekly: Clean water reservoir and K-Cup holder
3. Monthly: Run vinegar solution through brewing system
4. As needed: Descale when indicator light appears
5. Replace water filter every 2 months

CAUTION! Unplug before cleaning. Never immerse in water.

Descaling Procedure

Required every 3-6 months depending on water hardness.

1. Prepare descaling solution or white vinegar
2. Fill reservoir with descaling solution
3. Enter descale mode: Hold 8oz + 10oz buttons for 3 seconds
4. Brew into large container until reservoir empty
5. Let solution sit in system for 30 minutes
6. Rinse: Fill with fresh water, brew 2-3 times
7. Exit descale mode: Press POWER button

WARNING! Use only Keurig descaling solution or white vinegar.

Regulatory Information

UL listed; FCC Part 15 compliant. Copyright © Keurig Green Mountain, Inc. For support, visit www.keurig.com or contact 1-866-901-2739. This device complies with part 15 of the FCC Rules.

Troubleshooting

Reset: Unplug for 2 minutes to reset system.

Service: 1-866-901-2739; www.keurig.com