Keurig Instructions Manual

The Keurig brewing system is a single-serve coffee maker designed for convenience and quality. This manual covers the K-Classic, K-Select, and K-Elite models featuring multiple brew sizes, programmable settings, auto on/off functionality, removable water reservoir, descaling alerts, and compatibility with K-Cup pods. Below are essential sections for setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Initial Setup 3. Brewing Instructions 4. Specifications 5. Controls and Settings 6. Cleaning & Maintenance 7. Descaling Process 8. Programming Features 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Removable water reservoir, K-Cup pod holder, drip tray, control panel, power button, brew size selector.

Feature	Description
Water Reservoir	Removable 48-72oz capacity for easy filling
Brew Size Selector	Multiple cup sizes (6oz, 8oz, 10oz, 12oz)
Control Panel	LED display with button controls
Auto On/Off	Programmable power saving feature
Hot Water Button	Dispenses hot water for tea/cocoa
Strength Control	Adjusts brew strength (select models)
Iced Setting	Special brew cycle for iced beverages
Descale Indicator	Alerts when cleaning is needed
Drip Tray	Removable with adjustable height
Power Button	Main unit on/off control

Initial Setup

Unpack and inspect all components. Place on stable, level surface.

Remove packaging materials and stickers from water reservoir and pod holder.
Fill water reservoir with fresh cold water and reinstall securely.
Plug power cord into grounded electrical outlet.
Prime the system: Place mug on drip tray, lift and close handle without pod, select largest brew size.
Allow brewing cycle to complete - this primes the internal pump.

WARNING! Use only clean, cold water. Do not use distilled or softened water.

Brewing Instructions

Follow these steps for perfect single-serve beverages.

Power on: Press POWER button - indicator light will illuminate.
Fill reservoir: Ensure adequate water level for desired brew size.
Place mug: Position cup on drip tray (minimum 5oz capacity).
Insert pod: Lift handle, place K-Cup pod in holder, close handle firmly.
Select brew size: Press desired cup size button (6oz, 8oz, 10oz, 12oz).
Brew: Press BREW button - cycle completes in approximately 60 seconds.
Remove pod: Lift handle after brewing - used pod ejects into holder.

CAUTION! Hot surfaces - avoid contact during and immediately after brewing.

Specifications

Dimensions: Varies by model (approx. 13" H x 10" W x 13" D)
Water Reservoir: 48oz to 72oz removable capacity
Power: 120V AC, 60Hz, 1470W
Brew Time: Approximately 60 seconds per cup
Brew Sizes: 6oz, 8oz, 10oz, 12oz (model dependent)
Temperature: 192°F optimal brewing temperature
Compatibility: All K-Cup pod varieties
Weight: 5-7 lbs (empty)
Warranty: 1-year limited warranty

Controls and Settings

Access brewing options via control panel buttons and programmable features.

Control Panel: POWER, BREW, CUP SIZE (6oz, 8oz, 10oz, 12oz), STRENGTH CONTROL, HOT WATER, ICED SETTING.

Programming: Auto On/Off - set power down timer from 30 minutes to 2 hours. Brew Strength - select STRONG for bolder coffee (available on select models). Temperature Control - adjust brew temp in 1° increments (premium models). Favorite Brew - program default cup size for one-touch brewing.

Cleaning & Maintenance

Regular cleaning ensures optimal performance and beverage quality.

Daily: Wipe exterior with damp cloth; empty drip tray and pod holder.
Weekly: Remove and wash water reservoir, drip tray, and pod holder in warm soapy water.
Monthly: Run water-only brew cycles to flush system; clean needle with paper clip.
Quarterly: Descale according to indicator light or every 3-6 months.

Tip: Always unplug unit before cleaning internal components.

Descaling Process

Essential maintenance to remove mineral buildup from internal components.

Prepare solution: Mix Keurig Descaling Solution with equal parts water or use white vinegar.
Fill reservoir: Pour descaling solution into empty water reservoir.
Start descale: Place large mug, press POWER and BREW simultaneously for 3 seconds.
Cycle solution: Run multiple brew cycles until reservoir is empty.
Rinse thoroughly: Fill reservoir with fresh water, run several water-only cycles.
Reset: Descaling light will turn off automatically when complete.

WARNING! Do not use descaling solutions not approved for Keurig brewers.

Programming Features

Customize your brewing experience with these programmable settings.

Auto On/Off: Set automatic shut-off from 30 minutes to 2 hours after last brew. Default Brew Size: Program your preferred cup size for one-touch brewing. Temperature Control: Adjust brew temperature in 1° increments (192°F default). Strength Control: Select STRONG setting for 50% more brew time and bolder flavor. High Altitude Setting: Optimize performance above 3,000 feet elevation.

Care & Storage

Unplug and empty all water before extended storage. Store in cool, dry location.

CAUTION! Never store with water in reservoir. Protect from freezing temperatures.

Regulatory Information

UL Listed: Certified for safety standards. FCC Part 15: Class B digital device compliance. Energy Star: Meets energy efficiency guidelines (select models). Copyright © Keurig Green Mountain, Inc. For support, visit www.keurig.com or contact 1-866-901-2739.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Brewer won't power on	Power connection	Check outlet; ensure power cord is securely connected.
No water flow	Clogged needle/reservoir	Clean exit needle; ensure reservoir is properly seated.
Small cup volume	Mineral buildup	Descale brewer; check for clogs in water path.
Leaking water	Loose connections	Check reservoir seal; ensure all components are properly assembled.
Poor coffee quality	Old pods/cleaning needed	Use fresh K-Cup pods; clean brewer; descale if needed.

Reset: Unplug for 2 minutes then restart. Factory reset: Hold 8oz and 10oz buttons for 5 seconds.

Service: 1-866-901-2739; www.keurig.com