Keurig K 50 Owners Manual

The Keurig K 50 is a single-serve coffee brewing system designed for home use. It features a 48-ounce removable water reservoir, multiple brew sizes (6, 8, 10 oz), energy-saving auto-off function, programmable settings, descale indicator, and compatibility with all K-Cup pods. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Brewing system, Removable water reservoir, Drip tray, K-Cup pod holder, Control panel, Power base.

Installation & Setup

Unpack and inspect all components. Place on clean, level surface.

1. Remove packaging materials from brewer and reservoir.
2. Wash water reservoir with warm, soapy water and rinse thoroughly.
3. Place reservoir on brewer base and fill with fresh water.
4. Plug into 120V AC power outlet.
5. Prime brewing system before first use.

WARNING! Do not use without water. Keep away from heat sources and moisture.

First-Time Use

Prime the brewing system before first brew cycle.

1. Fill reservoir with fresh water to maximum line.
2. Place mug on drip tray (at least 10 oz capacity).
3. Lift and close brewer handle without K-Cup pod.
4. Press power button to turn on brewer.
5. Select largest brew size and press brew button.
6. Repeat process 2-3 times to prime system.
7. Brewer is now ready for normal use.

CAUTION! Use only clean, fresh water. Do not use distilled water.

Specifications

• Dimensions: 13.2" H x 10.2" W x 13.3" D
• Water Reservoir: 48 oz removable
• Brew Sizes: 6, 8, 10 oz
• Power: 120V AC, 60Hz, 1470W
• Auto-off: Programmable (2 hr default)
• Weight: 7.5 lbs
• Warranty: 1 year limited
• Compatibility: All K-Cup pod varieties

Controls and Settings

Control Panel: Power button, Brew button, Size select button, Strength control (when available).

Programming: Hold Size button for 3 seconds to program auto-off timing. Hold Strength button to adjust brew strength.

Brew Sizes: 6 oz (small), 8 oz (medium), 10 oz (large). Auto-off Options: 2 hours (default), 90 minutes, 30 minutes, Off. Strength Control: Regular or Strong brew (when supported by K-Cup).

Brewing Process

Simple one-touch brewing operation.

1. Lift brewer handle to open K-Cup holder.
2. Insert K-Cup pod into holder.
3. Close handle firmly until it clicks.
4. Place mug on drip tray (minimum 6 oz capacity).
5. Select desired brew size using Size button.
6. Press Brew button to start brewing.
7. Brewing completes automatically.
8. Lift handle to remove used K-Cup pod.

Tip: Preheat mug with hot water for hotter coffee.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

1. Daily: Wipe exterior with damp cloth.
2. Weekly: Clean water reservoir and drip tray.
3. Monthly: Clean needle and K-Cup holder area.
4. As needed: Descale when indicator lights.
5. Empty and rinse reservoir regularly.

WARNING! Unplug before cleaning. Do not immerse in water.

Descaling Procedure

Descale every 3-6 months or when indicator lights.

1. Fill reservoir with 48 oz white vinegar or descaling solution.
2. Place large mug or container on drip tray.
3. Turn brewer on and press Brew without K-Cup pod.
4. Repeat brewing until reservoir is empty.
5. Discard vinegar/descaling solution.
6. Rinse reservoir thoroughly and fill with fresh water.
7. Brew and discard 3-4 reservoirs of clean water.
8. Descale indicator will turn off when complete.

CAUTION! Use only Keurig descaling solution or white vinegar.

Care Instructions

Unplug before cleaning. Wipe exterior with soft, damp cloth. Clean reservoir with mild detergent.

CAUTION! Do not use abrasive cleaners. Avoid getting water in electrical components.

Regulatory Information

UL Listed: Complies with UL 197. FCC Part 15: Class B digital device. Copyright © Keurig Green Mountain, Inc. For support, visit www.keurig.com or contact 1-866-901-2739. This brewer is designed for household use only.

Troubleshooting

Reset: Unplug for 30 seconds, then restart.

Service: 1-866-901-2739; www.keurig.com