Keurig K Compact Manual

The Keurig K Compact is a single-serve coffee maker designed for home use, featuring a compact design, multiple brew sizes, energy saving auto-off function, removable water reservoir, descaling alert, and compatibility with all Keurig K-Cup pods. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Compact brewer, Removable water reservoir, Drip tray, K-Cup pod holder, Power button, Brew size buttons, Water reservoir lid.

Installation & Setup

Unpack and inspect all components. Place on clean, stable surface.

1. Remove packaging materials and stickers from brewer.
2. Wash removable water reservoir with warm, soapy water and rinse thoroughly.
3. Place brewer on counter away from heat sources and water splashes.
4. Fill water reservoir with fresh cold water and reinstall.
5. Plug into 120V AC outlet.

WARNING! Do not use brewer without water. Keep away from children. Ensure stable placement.

First-Time Use

Prime the brewing system before first use.

1. Press power button to turn on brewer.
2. Wait for ready light to illuminate (approx. 3 minutes).
3. Lift and close handle without K-Cup pod.
4. Place mug on drip tray and select largest brew size.
5. Press brew button to run water through system.
6. Repeat process 2-3 times to prime system completely.

CAUTION! First few brews may contain manufacturing residues. Discard initial brews.

Specifications

• Dimensions: 12.5" H x 5.5" W x 13.5" D
• Water Reservoir: 42oz removable capacity
• Brew Sizes: 6oz, 8oz, 10oz
• Power: 120V AC, 60Hz, 1470W
• Auto Off: 90 seconds after brew cycle
• Weight: 6.5 lbs
• Brew Time: Under 1 minute
• Temperature: 192°F optimal brewing temperature
• Compatibility: All Keurig K-Cup pods

Controls and Settings

Front panel controls: Power button, Brew size buttons (6oz, 8oz, 10oz), Brew button.

Indicator Lights: Power light (blue), Ready light (green), Add water alert (red).

Brew Size Selection: Press desired size button before brewing. Auto Off: Brewer turns off automatically 90 seconds after brew cycle. Water Filter: Optional Keurig water filter can be installed in reservoir.

Brewing Coffee

Simple one-touch brewing process.

1. Press power button - wait for ready light.
2. Lift handle and insert K-Cup pod.
3. Close handle firmly.
4. Place mug on drip tray (min 5oz capacity).
5. Select brew size (6oz, 8oz, or 10oz).
6. Press brew button - brewing begins immediately.
7. Brewing completes automatically.
8. Remove mug and enjoy.

Tip: For stronger coffee, use smaller brew size with same K-Cup pod.

Maintenance & Cleaning

Regular cleaning ensures optimal performance.

1. Daily: Wipe exterior with damp cloth.
2. Weekly: Remove and wash drip tray and water reservoir.
3. Monthly: Clean K-Cup holder and needle.
4. As needed: Descale when indicator light appears.

CAUTION! Unplug before cleaning. Do not immerse brewer in water.

Descaling Process

Required every 3-6 months depending on water hardness.

1. Prepare Keurig descaling solution or white vinegar.
2. Fill water reservoir with descaling solution and water.
3. Place large mug on drip tray.
4. Press power and brew buttons simultaneously for 3 seconds.
5. Select largest brew size and start descaling cycle.
6. Repeat until reservoir is empty.
7. Rinse reservoir and run several cycles with clean water.

WARNING! Follow descaling instructions carefully to avoid damage.

Regulatory Information

UL listed for household use. FCC Part 15 compliance. Copyright © 2025 Keurig Green Mountain, Inc. All rights reserved. Energy Star compliant. For support, visit www.keurig.com or contact 1-866-901-2739.

Troubleshooting

Reset: Unplug for 30 seconds then restart.

Service: 1-866-901-2739; www.keurig.com