Keurig K Cup Brewer Manual

The Keurig K Cup Brewer is a single-serve coffee brewing system that uses K-Cup pods to brew a perfect cup of coffee, tea, or hot cocoa in under a minute. Features include multiple brew sizes, removable drip tray, energy saving auto-off, descale indicator, water reservoir, and compatibility with most K-Cup pod varieties. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation and Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Brewing Process 7. Maintenance and Cleaning 8. Descaling Procedure 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Water reservoir, K-Cup pod holder, Drip tray, Control panel, Power button, Brew size buttons, Removable parts for cleaning.

Feature	Description
Water reservoir	Removable tank for easy filling and cleaning
K-Cup pod holder	Chamber for inserting K-Cup pods
Drip tray	Removable tray to catch spills and drips
Control panel	Buttons for power, brew sizes, and settings
Brew size options	6oz, 8oz, 10oz cup sizes
Energy saving mode	Auto-off after 90 seconds of inactivity
Descale indicator	Light alerts when descaling is needed
Power button	Turns brewer on/off
Hot water button	Dispenses hot water without pod
Brew button	Starts brewing process

Installation and Setup

Unpack and inspect contents. Place on clean, level surface.

Remove all packaging materials and stickers.
Wash removable parts: reservoir, drip tray, and K-Cup holder with warm soapy water.
Place brewer on stable, level surface near power outlet.
Fill water reservoir with fresh cold water and reattach.
Plug into 120V AC power outlet.

WARNING! Keep away from water sources. Ensure hands are dry when handling electrical components.

First-Time Use

Prime the brewing system before first use.

Press POWER button to turn on brewer.
Lift and close handle without K-Cup pod to run cleaning cycle.
Place mug on drip tray.
Press BREW button to run water through system.
Repeat 2-3 times to clear any manufacturing residues.
Brewer is now ready for normal use.

CAUTION! First few brews may have unusual taste - this is normal during initial setup.

Specifications

Brewer Type: Single-serve K-Cup pod system
Brew Sizes: 6oz, 8oz, 10oz
Water Reservoir: 48oz removable tank
Power: 120V AC, 60Hz, 1470W
Brew Time: Under 1 minute
Auto-off: 90 seconds
Dimensions: 13.2" H x 10.1" W x 13.1" D
Weight: 7.5 lbs
Compatibility: Most K-Cup pod varieties
Warranty: 1 year limited

Controls and Settings

Control panel includes POWER, BREW SIZE SELECTION, and HOT WATER buttons.

Brew Size Selection: Press corresponding button for desired cup size (6oz, 8oz, 10oz). LED indicates selected size.

Power Management: Auto-off activates after 90 seconds of inactivity. Press POWER to wake from sleep mode.

Descale Indicator: Red light alerts when mineral buildup requires descaling.

Brew Strength: Some models include STRENGTH button for bolder coffee.

Brewing Process

Simple steps for perfect brewing every time.

Lift handle to open K-Cup pod chamber.
Insert K-Cup pod (foil lid facing up).
Close handle firmly until it clicks.
Place mug on drip tray (minimum 5oz capacity).
Select desired brew size (6oz, 8oz, 10oz).
Press BREW button - brewing begins immediately.
Brewing completes automatically.
Lift handle to eject used pod.

Tip: For hotter coffee, run hot water cycle first to preheat system.

Maintenance and Cleaning

Regular cleaning ensures optimal performance and taste.

Daily: Wipe exterior with damp cloth
Weekly: Remove and wash drip tray, K-Cup holder, and reservoir
Monthly: Clean needle that pierces K-Cup pod
As needed: Descale when indicator light appears

WARNING! Unplug brewer before cleaning. Never immerse in water.

Descaling Procedure

Remove mineral buildup for optimal performance.

Prepare descaling solution or white vinegar/water mix.
Empty water reservoir and fill with descaling solution.
Place large mug (at least 10oz) on drip tray.
Press and hold 8oz and 10oz buttons for 3 seconds to enter descale mode.
Press BREW button to start descaling cycle.
Repeat brewing until reservoir is empty.
Rinse reservoir thoroughly and fill with fresh water.
Run several brew cycles with fresh water to rinse system.

CAUTION! Follow descaling instructions precisely to avoid damage.

Care & Storage

Unplug when not in use for extended periods. Empty water reservoir before storage.

CAUTION! Store in dry location. Protect from extreme temperatures.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Brewer won't turn on	Power connection	Check power cord; ensure outlet is working; reset if needed
No water flow	Clogged needle/reservoir	Clean exit needle; ensure reservoir is properly seated
Weak coffee	Mineral buildup	Descale brewer; check water quality
Leaking water	Loose connections	Check reservoir seal; ensure all parts properly assembled
Descale light on	Mineral buildup	Perform descaling procedure immediately
Pod not pierced	Clogged entrance needle	Clean entrance needle with paper clip

Reset: Unplug for 2 minutes, then restart.

Service: 1-866-901-BREW (2739); www.keurig.com