Keurig K10 Mini Plus Brewing System Manual

The Keurig K10 Mini Plus is a compact single-serve coffee brewing system designed for personal use and small spaces. It features one-touch brewing, multiple cup sizes, auto-off functionality, removable drip tray, descaling alert, and compatibility with all Keurig K-Cup pods. Powered by 120V AC, this energy-efficient brewer heats water quickly and provides consistent brewing performance. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Use 4. Specifications 5. Controls and Operation 6. Brewing Process 7. Maintenance & Cleaning 8. Descaling Procedure 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Compact brewer body, Water reservoir, K-Cup pod holder, Drip tray, Power button, Brew button, Cup size selector.

Feature	Description
Water reservoir	48oz removable reservoir for easy filling
K-Cup pod holder	Chamber for inserting K-Cup pods
Drip tray	Removable tray for spills and mug support
Power button	Turns brewer on/off
Brew button	Initiates brewing process
Cup size selector	Choose from 6oz, 8oz, or 10oz brew sizes
Auto-off	Automatically turns off after 90 seconds of inactivity
Descaling alert	Indicator light signals when descaling is needed
Energy efficient	Rapid heat-up technology saves energy
Compact design	Space-saving footprint for countertops

Installation & Setup

Unpack and inspect all components. Place on clean, stable, level surface.

Remove packaging materials and stickers from brewer.
Wash removable water reservoir with warm, soapy water and rinse thoroughly.
Fill reservoir with fresh cold water and place back on brewer.
Plug power cord into grounded electrical outlet.
Allow brewer to initialize (may take a few minutes).

WARNING! Do not use brewer without water. Keep away from heat sources and moisture.

First-Time Use

Prime the brewing system before first use.

Ensure water reservoir is filled and properly seated.
Press POWER button to turn brewer on.
Without inserting a K-Cup pod, place mug on drip tray.
Press BREW button to run water through system.
Repeat brewing cycle 2-3 times to prime system.
Brewer is now ready for normal use with K-Cup pods.

CAUTION! Water will be hot. Use caution when handling.

Specifications

Dimensions: 9.8" H x 12.2" W x 11.3" D
Water Reservoir: 48 oz removable
Brew Sizes: 6oz, 8oz, 10oz
Power: 120V AC, 60Hz, 1470W
Auto-off: 90 seconds
Heat-up Time: Less than 3 minutes
Compatibility: All Keurig K-Cup pods
Weight: 5.5 lbs
Warranty: 1 year limited

Controls and Operation

Front panel controls: POWER button (on/off), BREW button, Cup size indicator lights.

Operation: Press POWER to turn on, select cup size, insert K-Cup pod, press BREW to start brewing cycle. Brewer will automatically shut off after 90 seconds of inactivity.

Indicator Lights: Green power light indicates brewer is on. Blue brew light indicates brewing in progress. Orange descale light signals when descaling is required.

Brewing Process

Step-by-step brewing instructions:

Lift handle to open K-Cup pod chamber.
Insert desired K-Cup pod into chamber.
Close handle firmly until it clicks.
Place mug on drip tray (minimum 5oz capacity).
Select desired cup size (6oz, 8oz, or 10oz).
Press BREW button to start brewing cycle.
Brewing completes automatically.
Remove mug and enjoy your beverage.

Tip: For best results, use filtered water and fresh K-Cup pods.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Daily: Wipe exterior with damp cloth.
Weekly: Remove and wash drip tray and water reservoir.
Monthly: Clean K-Cup pod holder and needle.
As needed: Descale when indicator light appears.

WARNING! Unplug brewer before cleaning. Never immerse in water.

Descaling Procedure

Descale every 3-6 months or when indicator light appears.

Purchase Keurig Descaling Solution or white vinegar.
Fill water reservoir with descaling solution or vinegar/water mix.
Run brewing cycles without K-Cup pod until reservoir is empty.
Rinse reservoir and fill with fresh water.
Run multiple brewing cycles to rinse system thoroughly.
Descale light will reset automatically.

CAUTION! Follow descaling instructions carefully to avoid damage.

Regulatory Information

UL listed; complies with FCC Part 15. Energy Star certified. Copyright © Keurig Green Mountain, Inc. All rights reserved. For support, visit www.keurig.com or contact 1-866-901-2739. Manufactured for Keurig Green Mountain, Inc., Waterbury, VT.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Brewer won't turn on	Power connection	Check power cord; ensure outlet is working; press POWER firmly.
No water flow	Empty reservoir/clog	Refill water reservoir; check for clogs; descale if needed.
Weak coffee	Water temperature/pod	Ensure proper heating; use fresh K-Cup pod; check cup size setting.
Leaking water	Seals/reservoir	Check reservoir seating; inspect seals; contact service if persistent.
Descale light on	Mineral buildup	Perform descaling procedure; use approved descaling solution.

Reset: Unplug for 2 minutes, then restart.

Service: 1-866-901-2739; www.keurig.com