Keurig K10 Personal Coffee Maker Manual

The Keurig K10 Personal Coffee Maker is a compact single-serve brewing system designed for personal use, featuring one-touch operation, multiple cup sizes, removable drip tray, energy-saving auto-off function, descale indicator, and compatibility with all K-Cup pods. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Brewing Coffee 7. Maintenance & Cleaning 8. Descaling Procedure 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Water reservoir, K-Cup pod holder, Drip tray, Power button, Brew buttons, Descaling indicator.

Feature	Description
Water Reservoir	Removable 48oz capacity for easy filling
Brew Sizes	6oz, 8oz, and 10oz cup options
K-Cup Holder	Compatible with all K-Cup pod varieties
Drip Tray	Removable for cleaning and accommodates travel mugs
Power Button	Main power control with indicator light
Brew Buttons	One-touch brewing for selected cup size
Auto-Off	Energy saving feature turns off after 90 seconds
Descale Indicator	Alerts when descaling is required
Heating System	Rapid thermal technology for quick heating
Compact Design	Space-saving footprint for countertops

Installation

Unpack and inspect contents. Place on clean, stable, level surface.

Remove all packaging materials from inside and outside the brewer.
Wash removable parts: reservoir and drip tray with warm soapy water.
Place brewer on counter away from edges and heat sources.
Fill water reservoir with fresh cold water and reinstall.
Plug into 120V AC power outlet.

WARNING! Do not use without water. Ensure brewer is on stable surface to prevent tipping.

First-Time Setup

Prime the brewing system before first use.

Plug in brewer - power button will illuminate.
Lift and close handle without K-Cup pod to initialize system.
Place mug on drip tray.
Press power button - brewer will begin heating.
When ready light illuminates, press brew button to run water through system without pod.
Repeat brewing cycle 2-3 times to prime system completely.

CAUTION! First few brews may contain manufacturing residues - discard these initial brews.

Specifications

Dimensions: 9.8" W x 12.2" D x 12.9" H
Water Reservoir: 48 oz removable
Brew Sizes: 6oz, 8oz, 10oz
Power: 120V AC, 60Hz, 1470W
Heating Time: Less than 3 minutes
Auto-Off: 90 seconds after brew cycle
Weight: 5.5 lbs
Compatibility: All K-Cup pod varieties
Warranty: 1 year limited

Controls and Settings

Front panel controls: Power button, Brew size buttons (6oz, 8oz, 10oz), Add Water indicator, Descaling indicator.

Indicator Lights: Power (blue), Ready (green), Add Water (red), Descaling (amber).

Brewing: Select cup size before brewing. Auto-Off: Brewer turns off 90 seconds after last use. Water Level: Red indicator lights when reservoir needs refilling. Descaling: Amber light indicates when descaling is required.

Brewing Coffee

Simple one-touch brewing process.

Ensure brewer is powered on and ready light is illuminated.
Lift handle and insert K-Cup pod into pod holder.
Close handle firmly until it clicks into place.
Place mug on drip tray (remove tray for travel mugs).
Press desired brew size button (6oz, 8oz, or 10oz).
Brewing begins immediately - complete cycle takes approximately 1 minute.
After brewing, lift handle to eject used pod into storage compartment.

Tip: For hotter coffee, run water through without pod first to preheat system.

Maintenance & Cleaning

Regular cleaning ensures optimal performance and coffee quality.

Daily: Wipe exterior with damp cloth.
Weekly: Remove and wash drip tray and reservoir with warm soapy water.
Monthly: Clean needle that punctures K-Cup pods using paper clip.
As needed: Empty used pod storage compartment.
Descale: When indicator light illuminates or every 3-6 months.

CAUTION! Unplug brewer before cleaning. Never immerse brewer in water.

Descaling Procedure

Required every 3-6 months depending on water hardness.

Purchase Keurig Descaling Solution or use vinegar solution.
Empty water reservoir and fill with descaling solution.
Place large mug on drip tray.
Press power and brew buttons simultaneously for 3 seconds to enter descale mode.
Press brew button to start descaling cycle.
Repeat brewing until reservoir is empty.
Rinse reservoir thoroughly and fill with fresh water.
Brew multiple cycles with fresh water to rinse system completely.

WARNING! Follow descaling instructions carefully to avoid damage to brewing system.

Regulatory Information

UL Listed: Complies with UL STD 197. FCC Part 15: Class B digital device. Copyright © Keurig Green Mountain, Inc. For support, visit www.keurig.com or contact 1-866-901-2739. This brewer is designed for household use only.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Brewer won't power on	Power connection	Check power cord connection; ensure outlet is working
No water flow	Clogged needle/reservoir	Clean exit needle; ensure reservoir is properly seated
Coffee too weak	Brew size setting	Use smaller cup size setting for stronger brew
Leaking water	Loose connections	Check reservoir seating; inspect water tank for cracks
Descale light on	Mineral buildup	Perform descaling procedure immediately
Partial cup	Water level/air lock	Refill reservoir; prime system by running water through

Reset: Unplug for 2 minutes then restart.

Service: 1-866-901-2739; www.keurig.com