Keurig K130 Manual

The Keurig K130 is a commercial-grade single-serve coffee brewer designed for office and commercial use. It features a large 90-ounce water reservoir, programmable settings, multiple brew sizes, energy-saving mode, descaling alert, removable drip tray, and compatibility with all K-Cup pods. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Brewing Process 7. Maintenance 8. Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Large water reservoir, LCD display, brew button, programmable settings, removable drip tray, K-Cup pod holder.

Feature	Description
Water Reservoir	90-ounce capacity with easy-fill handle
LCD Display	Shows status, settings, and alerts
Brew Sizes	6oz, 8oz, 10oz programmable options
Energy Saver	Auto-off feature to conserve energy
Descaling Alert	Indicator when descaling is needed
Drip Tray	Removable for easy cleaning
POWER	Turns brewer on/off
BREW	Starts brewing process
MENU	Accesses programming options
SELECT	Navigates through menu options

Installation

Unpack and inspect contents. Place on stable, level surface.

Remove packaging materials and stickers
Place brewer on clean, dry countertop
Fill water reservoir with fresh cold water
Plug into grounded electrical outlet
Prime the brewing system (see First-Time Setup)

WARNING! Use only grounded outlet. Keep away from water sources. Ensure stable placement.

First-Time Setup

Power on brewer; follow initial setup procedure.

Prime the system: Press power, place mug, run water through without pod
Set time: Use MENU button to set current time
Program brew sizes: Select preferred 6oz, 8oz, or 10oz settings
Set auto-off: Configure energy saving auto-off timer (1-5 hours)
Test brew: Insert K-Cup and brew first cup

CAUTION! First few cups may contain manufacturing residues. Discard first 2-3 brews.

Specifications

Water Capacity: 90 ounces
Brew Sizes: 6oz, 8oz, 10oz (programmable)
Power: 120V AC, 60Hz, 1470W
Dimensions: 13.3" W x 10.2" D x 14.1" H
Weight: 9.5 lbs
Compatibility: All K-Cup pods
Display: LCD with status indicators
Reservoir: Removable with handle
Auto-off: Programmable 1-5 hours

Controls and Settings

Access settings via MENU button and SELECT navigation.

Front Panel: POWER, BREW, MENU, SELECT, LCD display, brew size indicators.

Programmable Settings: Brew size (6oz/8oz/10oz), Auto-off timer (1-5 hours), 24-hour clock, Descaling mode, Factory reset. LCD shows: Ready status, Brewing progress, Auto-off countdown, Descaling alert, Water level indicator.

Brewing Process

Simple one-touch brewing with K-Cup pods.

Ensure brewer is on and ready (green light)
Lift handle and insert K-Cup pod
Close handle firmly
Place mug on drip tray
Press BREW button for selected size
Brewing completes automatically
Lift handle to eject used pod

Tip: Use larger mugs for 10oz brew size. Preheat mug with hot water for hotter coffee.

Maintenance

Regular maintenance ensures optimal performance.

Daily: Wipe exterior, empty drip tray
Weekly: Clean water reservoir, descale as needed
Monthly: Deep clean brewing mechanism
As needed: Replace water filter (if equipped)

Descaling: Follow descaling procedure when indicator appears. Use Keurig descaling solution only.

Cleaning

Unplug before cleaning. Use mild detergent and soft cloth.

Exterior: Damp cloth with mild detergent. Interior: Run vinegar solution monthly. Drip Tray: Remove and wash with soapy water. Water Reservoir: Wash with warm soapy water weekly.

CAUTION! Do not immerse brewer in water. No abrasive cleaners.

Regulatory Information

UL listed. FCC Part 15 compliant. CSA certified. Copyright © Keurig Green Mountain, Inc. For support, visit www.keurig.com or contact 1-866-901-2739. This commercial brewer is designed for office and commercial environments.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Brewer won't power on	Power connection	Check outlet; ensure power cord plugged in securely
No water flow	Water reservoir/air lock	Refill reservoir; prime system; check for clogs
Weak coffee	Brew size/need descaling	Adjust brew size; descale system; check water temperature
Leaking water	Seals/reservoir	Check reservoir placement; inspect seals; ensure handle closed
Descaling light on	Mineral buildup	Perform descaling procedure with Keurig solution

Reset: Unplug for 2 minutes, then restart.

Service: 1-866-901-2739; www.keurig.com