Keurig K200 Manual

The Keurig K200 is a compact single-serve coffee maker designed for home use, featuring K-Cup pod compatibility, multiple brew sizes, removable drip tray, energy saving auto-off, descale indicator, and simple one-button operation. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Water reservoir, K-Cup holder, Drip tray, Power button, Brew button, Cup rest.

Feature	Description
Water reservoir	48oz removable water tank
K-Cup holder	Accepts all K-Cup pod varieties
Drip tray	Removable for cleaning
Power button	Turns brewer on/off
Brew button	Starts brewing process
Cup rest	Accommodates travel mugs up to 7.2"
Brew size selector	6, 8, 10 oz brew sizes
Descale indicator	Alerts when descaling needed
Energy saving mode	Auto-off after 90 seconds
Indicator lights	Power and ready status

Installation

Unpack and inspect contents. Place on clean, level surface.

1. Remove all packaging materials from brewer and components.
2. Wash water reservoir with warm, soapy water and rinse thoroughly.
3. Place brewer on stable, level counter away from heat sources.
4. Fill water reservoir with fresh cold water and reinstall.
5. Plug power cord into grounded electrical outlet.

WARNING! Do not use brewer without water. Keep away from children.

First-Time Setup

Prime the brewing system before first use.

1. Press POWER button to turn on brewer.
2. Wait for READY light to illuminate (approx. 3 minutes).
3. Lift and close handle without K-Cup pod.
4. Place mug on drip tray.
5. Press BREW button to run water through system.
6. Repeat process 2-3 times to prime system.
7. Brewer is now ready for use.

CAUTION! First few brews may contain manufacturing residues.

Specifications

• Dimensions: 12.5" H x 9.8" W x 13.2" D
• Water Reservoir: 48 oz capacity
• Brew Sizes: 6 oz, 8 oz, 10 oz
• Power: 120V AC, 60Hz, 1470W
• Auto-Off: 90 seconds
• Weight: 6.5 lbs
• Cord Length: 30 inches
• Warranty: 1 year limited

Controls and Settings

Simple one-button operation with indicator lights.

Power Button: Turns brewer on and off. Red light indicates power on.

Brew Button: Starts brewing cycle when READY light is illuminated.

Brew Size Selection: Press and hold BREW button until desired amount is dispensed.

Indicator Lights: Power (red), Ready (green), Descaling (orange).

Auto-Off: Automatically turns off 90 seconds after last brew.

Brewing Coffee

Simple steps for perfect single-serve coffee.

1. Press POWER button to turn on brewer.
2. Wait for READY light to illuminate.
3. Lift handle and insert K-Cup pod.
4. Close handle firmly.
5. Place mug on drip tray.
6. Press BREW button to start cycle.
7. Brewing completes automatically.
8. Lift handle to eject used pod.

Tip: For stronger coffee, use smaller brew size with same pod.

Cleaning & Maintenance

Regular cleaning ensures optimal performance.

1. Unplug brewer before cleaning.
2. Remove and wash water reservoir regularly.
3. Wipe exterior with damp cloth.
4. Clean drip tray and cup rest as needed.
5. Remove K-Cup holder and rinse under water.
6. Wipe needle area with damp cloth.

CAUTION! Do not immerse brewer in water or use abrasive cleaners.

Descaling

Descale when indicator light illuminates or every 3-6 months.

1. Fill reservoir with descaling solution or white vinegar mixture.
2. Place large container on drip tray (at least 16 oz).
3. Press and hold 8oz and 10oz buttons simultaneously for 3 seconds.
4. Press BREW button to start descaling cycle.
5. Repeat brewing until reservoir is empty.
6. Rinse reservoir and fill with fresh water.
7. Run several brewing cycles with clean water to rinse.

WARNING! Always rinse thoroughly after descaling.

Regulatory Information

UL listed. FCC Part 15 compliant. Copyright © Keurig Green Mountain, Inc. For support, visit www.keurig.com or contact 1-866-901-2739. This brewer is designed for household use only.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Brewer won't turn on	Power connection	Check power cord; ensure outlet works; press POWER button.
No water flow	Empty reservoir/clog	Fill water reservoir; check for clogs; descale if needed.
Small cup of coffee	Brew size setting	Hold BREW button longer for larger cup; check water level.
Coffee tastes weak	Brew size/cleaning	Use smaller brew size; clean brewer; use fresh pods.
Leaking water	Seals/reservoir	Ensure reservoir properly seated; check seals for damage.
Descale light on	Mineral buildup	Perform descaling procedure; reset light after completion.

Reset: Unplug for 2 minutes then restart.

Service: 1-866-901-2739; www.keurig.com