Keurig K200 Owners Manual

The Keurig K200 is a compact single-serve coffee maker designed for home use, featuring multiple brew sizes, energy saving mode, removable water reservoir, descaling alert, and compatibility with all K-Cup pods. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Brewing Process 7. Cleaning & Maintenance 8. Descaling Procedure 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Removable 40oz water reservoir, LCD display, power button, brew size buttons, energy saving mode, descaling indicator.

Feature	Description
Water Reservoir	40oz removable reservoir for easy filling
Brew Sizes	6oz, 8oz, 10oz cup sizes
LCD Display	Shows status, settings, and alerts
Energy Saving Mode	Automatically turns off after 90 seconds
K-Cup Pod Compatibility	Works with all K-Cup pod varieties
Descaling Alert	Indicator light when descaling is needed
Power Button	Turns brewer on/off
Brew Button	Starts brewing process
Drip Tray	Removable for cleaning
Water Filter	Optional water filter compatibility

Installation

Unpack and inspect contents. Place on clean, stable surface.

Remove all packaging materials from brewer and water reservoir.
Place brewer on flat, stable surface away from heat sources.
Fill water reservoir with fresh cold water and reattach to brewer.
Plug power cord into grounded electrical outlet.

WARNING! Do not operate without water in reservoir. Keep away from children.

First-Time Setup

Power on brewer; follow initial setup procedure.

Prime the system: Power on and run water through without K-Cup pod.
Set clock: Use LCD display to set current time.
Configure energy saving mode: Set auto-off timing preference.
Test brew: Insert K-Cup pod and brew first cup.

CAUTION! First few brews may produce unusual taste - this is normal during initial setup.

Specifications

Dimensions: 10.5" W x 13.2" H x 11.8" D
Water Reservoir: 40oz capacity
Brew Sizes: 6oz, 8oz, 10oz
Power: 120V AC, 60Hz, 1470W
Weight: 7.5 lbs
Brew Time: Under 1 minute
Temperature: 192°F optimal brewing temperature
Compatibility: All K-Cup pod varieties
Warranty: 1 year limited warranty

Controls and Settings

Access settings via LCD display and control buttons.

Front Panel: POWER, BREW, 6oz, 8oz, 10oz buttons, LCD display.

Settings Menu: Clock setting, energy saving mode (30 min, 90 min, 2 hr), brightness control, factory reset. Brew Controls: Cup size selection, hot water only mode, brew strength adjustment.

Brewing Process

Simple steps for perfect coffee every time.

Lift handle and insert K-Cup pod into pod holder.
Close handle firmly until it clicks into place.
Place mug on drip tray.
Select desired brew size (6oz, 8oz, 10oz).
Press BREW button to start brewing.
Remove mug when brewing completes.
Lift handle to eject used K-Cup pod.

Tip: Preheat mug with hot water for optimal temperature.

Cleaning & Maintenance

Regular cleaning ensures optimal performance.

Daily: Wipe exterior with damp cloth.
Weekly: Clean water reservoir and drip tray.
Monthly: Clean needle and pod holder area.
As needed: Descale when indicator light appears.

WARNING! Unplug brewer before cleaning. Do not immerse in water.

Descaling Procedure

Required every 3-6 months depending on water hardness.

Prepare descaling solution or white vinegar mixture.
Fill water reservoir with descaling solution.
Run solution through brewing cycle without K-Cup pod.
Let solution sit in brewer for 30 minutes.
Rinse thoroughly by running clean water through 2-3 cycles.
Brew one test cup with water only before normal use.

CAUTION! Follow descaling instructions carefully to avoid damage.

Regulatory Information

UL listed; FCC Part 15 compliant. Manufactured for Keurig Green Mountain, Inc. For support, visit www.keurig.com or contact 1-866-901-2739. This device complies with part 15 of the FCC Rules.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Brewer won't turn on	Power connection	Check power cord; ensure outlet works; reset breaker.
No water flow	Empty reservoir/clog	Refill reservoir; check for clogs; descale if needed.
Weak coffee	Brew size/needle clog	Select smaller brew size; clean exit needle.
Leaking water	Seals/reservoir	Check reservoir seating; inspect seals for damage.
Descaling light on	Mineral buildup	Perform descaling procedure immediately.

Reset: Unplug for 2 minutes then restart.

Service: 1-866-901-2739; www.keurig.com