Keurig K425 Owners Manual

The Keurig K425 is a premium brewing system featuring a 60 oz removable water reservoir, programmable auto on/off, strength control, temperature control, digital clock, brew progress indicator, and compatibility with all Keurig K-Cup pods. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: 60 oz removable water reservoir, LCD display, brew strength control, temperature control, programmable auto on/off, drip tray, K-Cup pod holder.

Installation & Setup

Unpack and inspect contents. Place on clean, level surface.

1. Remove water reservoir: Lift reservoir from brewer base.
2. Fill reservoir: Fill with fresh cold water, replace on brewer.
3. Prime the system: Plug in brewer, place mug, run water through without pod.
4. Set clock: Use MENU button to set current time.
5. Install water filter: Insert Keurig water filter if desired.

WARNING! Use only cold, fresh water. Do not use distilled or sparkling water.

First-Time Use

Power on brewer; follow initial setup prompts.

1. Prime brewing system: Brew water-only cycles until reservoir is empty.
2. Set preferences: Configure auto on/off times via MENU settings.
3. Adjust brew settings: Set default temperature and strength preferences.
4. Insert first K-Cup: Lift handle, insert pod, close handle, select cup size.
5. Begin brewing: Press BREW button to start first cycle.

CAUTION! First few brews may taste different due to manufacturing residues.

Specifications

• Dimensions: 13.3" H x 10.2" W x 13.8" D
• Water Reservoir: 60 oz removable
• Power: 120V AC, 60Hz, 1470W
• Cup Sizes: 4 oz, 6 oz, 8 oz, 10 oz
• Brew Time: Under 1 minute
• Display: LCD with backlight
• Weight: 8.8 lbs
• Warranty: 1 year limited
• Compatibility: All Keurig K-Cup pods

Controls and Settings

Access settings via MENU button on control panel. Front Panel: POWER, BREW, MENU, +/-, SELECT.

Display Indicators: Clock, Auto On/Off, Brew Strength, Temperature, Brew Progress.

Brew Settings: Cup size (4,6,8,10 oz), Brew Strength (Regular/Strong), Temperature (187°-192°F). System Settings: Auto On/Off times, Clock setting, Language, Factory Reset. Maintenance: Descaling indicator, Water filter reminder.

Brewing Process

Brews coffee, tea, hot cocoa, and other hot beverages.

1. Power on: Press POWER button, wait for ready indicator.
2. Prepare mug: Place mug on drip tray.
3. Insert K-Cup: Lift handle, insert pod, close handle firmly.
4. Select cup size: Use +/- buttons to choose brew size.
5. Start brew: Press BREW button, brewing begins immediately.
6. Remove mug: When brewing completes, remove mug.
7. Eject pod: Lift handle to automatically eject used pod.

Tip: Preheat mug with hot water for optimal temperature.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and beverage quality.

1. Daily: Wipe exterior with damp cloth, empty drip tray.
2. Weekly: Clean water reservoir and K-Cup holder assembly.
3. Monthly: Descale brewing system when prompted.
4. As needed: Replace water filter every 2 months or 60 tank refills.
5. Exterior: Clean with mild soap and water, dry thoroughly.

WARNING! Unplug brewer before cleaning. Never immerse in water.

Programming Features

Auto On/Off: Program brewer to turn on/off automatically. Clock: Set and display current time. Brew Preferences: Save default cup size, strength, and temperature settings.

Care Instructions

Unplug before cleaning. Use only mild detergents; no abrasive cleaners.

CAUTION! Do not use vinegar for descaling. Use only Keurig descaling solution.

Regulatory Information

UL Listed: Complies with UL 197 standards. FCC Part 15: Class B digital device. Copyright © 2025 Keurig Green Mountain, Inc. For support, visit www.keurig.com or contact 1-866-901-2739.

Troubleshooting

Reset: Unplug for 2 minutes to reset system.

Service: 1-866-901-2739; www.keurig.com