Keurig K60 Instruction Manual

The Keurig K60 is a single-serve coffee brewing system designed for home use, featuring multiple brew sizes, removable water reservoir, programmable auto on/off, descale indicator, and compatibility with K-Cup pods. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Brewing Process 7. Maintenance & Cleaning 8. Descaling Procedure 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Brew chamber, Water reservoir, Control panel, Drip tray, Power base, K-Cup holder.

Feature	Description
Brew Sizes	6oz, 8oz, 10oz programmable options
Water Reservoir	48oz removable reservoir with handle
Control Panel	LCD display with brew size buttons
Auto On/Off	Programmable 2-hour auto shut-off
Descale Indicator	Alerts when descaling is needed
Brew Temperature	192°F optimal brewing temperature
Power	120V AC, 60Hz, 1500W
Dimensions	13.3" H x 10.2" W x 13.1" D
Weight	9.5 lbs
Warranty	1-year limited warranty

Installation & Setup

Unpack and inspect all components. Place on clean, level surface.

Remove packaging materials from brewer and reservoir.
Wash reservoir with warm, soapy water and rinse thoroughly.
Place reservoir on brewer base and fill with fresh water.
Plug into grounded electrical outlet.
Prime brewing system by running water through without K-Cup.

WARNING! Keep away from water sources. Do not immerse in water. Ensure hands are dry when handling.

First-Time Use

Power on brewer; follow initial setup procedure.

Press power button to turn on brewer.
Allow brewer to heat up (approximately 3 minutes).
Lift and lower brew handle to open/close brew chamber.
Insert K-Cup pod and close brew handle.
Select desired brew size (6oz, 8oz, or 10oz).
Place mug on drip tray and press brew button.

CAUTION! Brewer and water will be hot. Keep away from children.

Specifications

Brew Sizes: 6oz, 8oz, 10oz (programmable)
Water Reservoir: 48oz capacity, removable
Brew Time: Under 1 minute per cup
Temperature: 192°F brewing temperature
Power: 120V AC, 60Hz, 1500W
Compatibility: All Keurig K-Cup pods
Display: LCD with brew size indicators
Auto Shut-off: Programmable 2-hour feature
Weight: 9.5 lbs
Warranty: 1-year limited

Controls and Settings

Control Panel: Power button, Brew size buttons (6oz, 8oz, 10oz), Add Water indicator, Descaling indicator.

Programming: Hold brew size button for 3 seconds to set default size. Auto On/Off: Press and hold power button to program auto shut-off time.

Brew Settings: Temperature control, Brew strength options (if available). Maintenance: Descaling mode, Reservoir removal indicator.

Brewing Process

Step-by-step brewing instructions for perfect coffee every time.

Ensure brewer is powered on and heated.
Lift brew handle to open chamber.
Insert K-Cup pod (do not remove foil lid).
Close brew handle firmly.
Place mug on drip tray (minimum 5oz capacity).
Select desired brew size.
Press brew button to start cycle.
Wait for brewing to complete (approx. 45-60 seconds).
Remove mug and enjoy.

Tip: For stronger coffee, use smaller brew size with same K-Cup.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

Daily: Wipe exterior with damp cloth.
Weekly: Clean water reservoir and drip tray.
Monthly: Descale brewing system.
As needed: Replace water filter (if using filtered reservoir).

CAUTION! Unplug brewer before cleaning. Never use abrasive cleaners.

Descaling Procedure

Descale every 3-6 months or when descale indicator lights.

Prepare descaling solution or white vinegar/water mixture.
Empty water reservoir and fill with descaling solution.
Place large mug or container on drip tray.
Enter descale mode (consult specific model instructions).
Run brewing cycles until reservoir is empty.
Rinse reservoir thoroughly and fill with clean water.
Run multiple water-only cycles to rinse system.
Reset descale indicator when complete.

WARNING! Use only Keurig descaling solution or approved alternatives.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Brewer won't power on	Power connection	Check outlet; ensure plug is secure; try different outlet.
No water flow	Clogged needle/reservoir	Descale brewer; check water reservoir placement.
Weak coffee	Brew size/needle clog	Use smaller brew size; clean exit needle.
Leaking water	Seals/reservoir	Check reservoir seals; ensure proper placement.
Descale light on	Mineral buildup	Perform descaling procedure immediately.
Brewer not heating	Thermal fuse/power	Unplug for 2 minutes; plug back in; contact service if persists.

Reset: Unplug for 2 minutes, then restart.

Service: 1-866-901-2739; www.keurig.com