Keurig K60 Special Edition Manual

The Keurig K60 Special Edition is a premium single-serve coffee brewing system featuring programmable settings, multiple cup sizes (6oz, 8oz, 10oz), removable 48oz water reservoir, energy-saving auto-off function, descale indicator, and compatibility with all K-Cup pod varieties. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Brewing system, Removable water reservoir, LCD display, Control panel, Drip tray, K-Cup pod holder.

Installation & Setup

Unpack and inspect all components. Place on clean, level surface.

1. Remove packaging materials and stickers from all surfaces
2. Wash removable water reservoir with warm, soapy water and rinse thoroughly
3. Fill reservoir with fresh cold water and place back into brewer
4. Plug into dedicated 120V AC outlet
5. Prime the brewing system before first use

WARNING! Do not use without water. Keep away from heat sources and moisture.

First-Time Use

Power on brewer; follow priming procedure.

1. Press POWER button to turn on brewer
2. Wait for READY indicator to illuminate
3. Place a mug on the drip tray
4. Lift and close the brewer handle without inserting a K-Cup pod
5. Select largest cup size (10oz) and press BREW button
6. Repeat brewing cycle 3 times with fresh water to prime system
7. Brewer is now ready for first coffee

CAUTION! Hot surfaces - use caution when handling.

Specifications

• Model: K60 Special Edition
• Water Capacity: 48oz removable reservoir
• Brew Sizes: 6oz, 8oz, 10oz
• Power: 1500W, 120V AC
• Brew Temperature: 192°F
• Auto-Off: Programmable (2hr, 4hr, Off)
• Compatibility: All K-Cup pods
• Dimensions: 13.3" H x 10.2" W x 13.0" D
• Weight: 9.5 lbs
• Warranty: 1-year limited

Controls and Settings

Access settings via control panel buttons and LCD display.

Control Panel: POWER, SMALL (6oz), MEDIUM (8oz), LARGE (10oz), AUTO OFF, STRENGTH CONTROL.

Brew Size Programming: Press and hold desired size button for 3 seconds to program default volume. Auto-Off Settings: Press AUTO OFF button to cycle through options (2hr, 4hr, Off). Strength Control: Adjusts brew strength for bolder coffee. LCD Display: Shows brew status, settings, descale alerts, and error messages.

Brewing Process

Simple 3-step brewing process for perfect coffee every time.

1. Lift brewer handle and insert K-Cup pod
2. Close handle firmly - piercing occurs automatically
3. Place mug on drip tray
4. Select desired brew size (6oz, 8oz, 10oz)
5. Press BREW button - brewing begins immediately
6. Brewing completes automatically
7. Remove mug and enjoy

Tip: Use filtered water for better tasting coffee and reduced mineral buildup.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

1. Daily: Wipe exterior with damp cloth
2. Weekly: Remove and clean drip tray and reservoir
3. Monthly: Clean exit needle with paperclip
4. As needed: Descale when indicator light appears
5. Quarterly: Deep clean brewing chamber

WARNING! Unplug brewer before cleaning. Never immerse in water.

Descaling Procedure

Descale every 3-6 months or when DESCALE indicator appears.

1. Empty water reservoir and fill with descaling solution or white vinegar
2. Place large mug or container on drip tray
3. Press and hold SMALL and LARGE buttons for 3 seconds to enter descale mode
4. Press BREW button to start descaling cycle
5. Repeat brewing until reservoir is empty
6. Rinse reservoir thoroughly and fill with fresh water
7. Brew several cycles with fresh water to rinse system
8. Descale complete when normal operation resumes

Regulatory Information

UL listed; complies with FCC Part 15. Copyright © Keurig Green Mountain, Inc. For support, visit www.keurig.com or contact 1-866-901-2739. This device complies with part 15 of the FCC Rules.

Troubleshooting

Reset: Unplug for 2 minutes to reset system.

Service: 1-866-901-2739; www.keurig.com