Keurig K65 Instruction Manual

The Keurig K65 is a premium single-serve coffee brewing system featuring a 60-ounce removable water reservoir, programmable settings, multiple brew sizes, digital clock with auto on/off functionality, energy saving mode, descale indicator, and compatibility with all K-Cup pods. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Digital display, 60oz removable water reservoir, drip tray, K-Cup pod holder, power button, brew size buttons, programmable settings.

Installation & Setup

Unpack and inspect all components. Place on clean, level surface.

1. Remove water reservoir: Lift straight up to remove from brewer base.
2. Fill reservoir: Add fresh cold water, replace on brewer.
3. Plug into outlet: Use 120V AC grounded outlet.
4. Prime brewer: Follow first-time setup procedure.

WARNING! Do not use without water. Keep away from heat sources and moisture.

First-Time Use

Power on brewer; follow priming procedure.

1. Prime the system: Press power button, wait for READY light.
2. Run water through: Place mug, press brew button without K-Cup.
3. Program brew sizes: Hold brew button for 3 seconds until light flashes.
4. Set clock: Use MENU button to set time and auto on/off.
5. Brew first cup: Insert K-Cup, select brew size.

CAUTION! First few brews may contain manufacturing residues.

Specifications

• Water Capacity: 60 ounces removable reservoir
• Brew Sizes: 6oz, 8oz, 10oz (programmable)
• Power: 120V AC, 60Hz, 1470W
• Dimensions: 13.3" H x 10.2" W x 13.1" D
• Weight: 9.5 lbs
• Compatibility: All K-Cup pod varieties
• Display: Digital clock with status indicators
• Warranty: 1 year limited warranty
• Temperature: 192°F optimal brewing temperature

Controls and Settings

Access settings via MENU button and brew size buttons.

Display Indicators: READY, BREWING, ADD WATER, DESCALING, AUTO ON/OFF

Brew Settings: Program each button (6oz, 8oz, 10oz) by holding for 3 seconds. Clock Settings: MENU > TIME SET. Auto On/Off: MENU > AUTO ON > set time. Energy Saver: Auto power down after 2 hours. Hot Water: Press and hold 8oz button for hot water only.

Brewing Process

Brew single cups using K-Cup pods.

1. Lift handle: Open K-Cup holder.
2. Insert pod: Place K-Cup in holder.
3. Close handle: Firmly press down until click.
4. Place mug: On drip tray under spout.
5. Select size: Press desired brew button.
6. Brewing: Process completes automatically.
7. Remove pod: Lift handle, discard used K-Cup.

Tip: Preheat mug with hot water for optimal temperature.

Maintenance & Cleaning

Regular cleaning ensures optimal performance.

1. Exterior: Wipe with damp cloth; no harsh chemicals.
2. Water reservoir: Remove and wash with mild detergent.
3. Drip tray: Remove and clean regularly.
4. K-Cup holder: Remove and rinse under water.
5. Needle: Use paper clip to clear any clogs.

CAUTION! Unplug before cleaning. Do not immerse in water.

Descaling Procedure

Descale every 3-6 months or when indicator lights.

1. Prepare solution: Use Keurig descaling solution or vinegar/water.
2. Fill reservoir: With descaling solution.
3. Start descale: Press MENU and 10oz button simultaneously.
4. Brew cycles: Run multiple brew cycles without K-Cup.
5. Rinse: Fill with fresh water, run several cycles.
6. Reset: Press MENU to exit descale mode.

WARNING! Follow descaling instructions carefully to avoid damage.

Regulatory Information

UL listed; FCC Part 15 compliant. Copyright © Keurig Green Mountain, Inc. For support, visit www.keurig.com or contact 1-866-901-2739. This brewer is designed for household use only.

Troubleshooting

Reset: Unplug for 2 minutes to reset system.

Service: 1-866-901-2739; www.keurig.com