Keurig Limited Edition Manual

The Keurig Limited Edition is a premium single-serve coffee brewing system featuring advanced brewing technology, multiple cup size options, programmable settings, energy-saving auto-off function, removable water reservoir, descaling alert system, and compatibility with K-Cup pods. Powered by 120V AC, 60Hz. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Brewing system, Water reservoir, Drip tray, Control panel, K-Cup pod holder, Power base.

Installation & Setup

Unpack and inspect all components. Place on clean, stable surface.

1. Remove packaging materials and protective tape from all components.
2. Place brewer on flat, stable surface away from edges.
3. Fill water reservoir with fresh cold water and reinstall.
4. Plug into grounded 120V AC outlet.
5. Prime brewing system before first use.

WARNING! Keep away from water sources. Do not immerse in water. Ensure proper ventilation around brewer.

First-Time Use

Power on brewer; follow initial setup procedure.

1. Press POWER button to turn on brewer.
2. Allow brewer to heat up (approximately 3 minutes).
3. Prime system: Run water through without K-Cup pod.
4. Program preferred settings: Brew size, strength, auto-off timing.
5. Insert K-Cup pod and begin brewing.

CAUTION! Hot surfaces during operation. Keep hands away from brew head and exit needle.

Specifications

• Dimensions: 13.2" H x 10.2" W x 13.1" D
• Water Reservoir: 48 oz removable
• Brew Sizes: 6oz, 8oz, 10oz programmable
• Brew Time: Under 1 minute
• Power: 120V AC, 60Hz, 1470W
• Weight: 7.5 lbs
• Temperature: 192°F brewing temperature
• Compatibility: All K-Cup pod varieties
• Warranty: 1 year limited warranty

Controls and Settings

Access settings via control panel buttons and LCD display.

Control Panel: POWER, BREW, STRENGTH, CUP SIZE, HOT WATER, AUTO OFF.

Brew Settings: Cup size selection (6oz, 8oz, 10oz), Strength control (Regular, Strong), Auto-off timing (2 hours default, programmable), Hot water on demand, Descaling mode activation, Factory reset option.

Brewing Process

Simple three-step brewing process for perfect coffee every time.

1. Lift handle to open K-Cup pod compartment.
2. Insert K-Cup pod and close handle firmly.
3. Place mug on drip tray.
4. Select desired cup size.
5. Press BREW button to start brewing.
6. Wait for brewing to complete (under 1 minute).
7. Remove mug and enjoy.

Tip: For best results, use filtered water and fresh K-Cup pods.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

1. Daily: Wipe exterior with damp cloth.
2. Weekly: Clean water reservoir and drip tray.
3. Monthly: Clean exit needle and brew chamber.
4. As needed: Descale when indicator light appears.
5. Quarterly: Deep clean all removable parts.

WARNING! Unplug brewer before cleaning. Never immerse in water.

Descaling Procedure

Descale every 3-6 months or when descale indicator appears.

1. Prepare descaling solution according to package instructions.
2. Fill water reservoir with descaling solution.
3. Place large mug or container on drip tray.
4. Enter descaling mode (refer to specific model instructions).
5. Run solution through brewing system until reservoir is empty.
6. Rinse thoroughly with fresh water (2-3 reservoirs).
7. Brew one cup of water to finalize rinse cycle.

CAUTION! Use only Keurig descaling solution or vinegar solution as recommended.

Care Instructions

Unplug before any maintenance. Use only mild detergent for cleaning.

CAUTION! Do not use abrasive cleaners. Keep electrical components dry. Store in cool, dry place when not in use.

Regulatory Information

UL Listed: Certified for safety standards. FCC Part 15: Class B digital device compliance. Copyright © 2025 Keurig Green Mountain, Inc. All rights reserved. For support, visit www.keurig.com or contact 1-866-901-2739.

Troubleshooting

Reset: Unplug for 2 minutes then restart if issues persist.

Service: 1-866-901-2739; www.keurig.com