Keurig Manual K40

The Keurig K40 is a single-serve coffee brewing system designed for home use, featuring multiple brew sizes, removable water reservoir, automatic shut-off, descaling alert, and compatibility with K-Cup pods. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Brew chamber, Removable water reservoir, Control panel, Drip tray, Power button, Brew size buttons.

Feature	Description
Brew sizes	6oz, 8oz, 10oz cup options
Water reservoir	48oz removable reservoir with handle
Power button	Turns brewer on/off
Brew button	Initiates brewing process
Descaling indicator	LED alert when descaling needed
Auto shut-off	Turns off after 90 seconds of inactivity
Drip tray	Removable tray with adjustable height
K-Cup pod holder	Chamber for inserting K-Cup pods
Water filter	Optional charcoal water filter
Power cord	Standard 120V AC power cord

Installation

Unpack and inspect contents. Place on clean, level surface.

1. Remove all packaging materials from brewer and components.
2. Wash removable water reservoir with warm, soapy water and rinse thoroughly.
3. Place brewer on stable, level countertop away from heat sources.
4. Fill water reservoir with fresh cold water and reinstall on brewer.
5. Plug power cord into grounded 120V outlet.

WARNING! Do not operate without water in reservoir. Keep away from children.

First-Time Setup

Prime the brewing system before first use.

1. Press POWER button to turn on brewer - lights will illuminate.
2. Lift and close handle without K-Cup pod to prime system.
3. Place mug on drip tray (minimum 10oz capacity recommended).
4. Select largest brew size (10oz) and press BREW button.
5. Allow water to run through complete cycle without K-Cup pod.
6. Repeat process 2-3 times to ensure system is fully primed.

CAUTION! Water will be hot. Do not touch during brewing cycle.

Specifications

• Dimensions: 13.3" H x 10.2" W x 13.8" D
• Water Reservoir: 48oz removable capacity
• Brew Sizes: 6oz, 8oz, 10oz
• Power: 120V AC, 60Hz, 1470W
• Brew Time: Approximately 1 minute per cup
• Auto Shut-off: 90 seconds after brew cycle
• Weight: 7.5 lbs
• Compatibility: All K-Cup pod varieties
• Warranty: 1 year limited warranty

Controls and Settings

Control Panel: POWER button, 6oz/8oz/10oz brew size buttons, Add Water indicator, Descaling alert.

Operation: Press POWER to turn on (blue light), select brew size, press BREW to start cycle. Add Water indicator lights when reservoir needs refilling. Descaling alert flashes when mineral buildup requires cleaning.

Brew Sizes: 6oz for strong coffee, 8oz for regular strength, 10oz for mild coffee. Water Filter: Optional charcoal filter improves taste and reduces mineral content.

Brewing Process

Simple steps for perfect single-serve brewing.

1. Press POWER button - brewer will illuminate.
2. Lift handle and insert K-Cup pod into holder.
3. Close handle firmly until it clicks into place.
4. Place mug on drip tray (minimum 10oz capacity).
5. Select desired brew size (6oz, 8oz, or 10oz).
6. Press BREW button - brewing begins immediately.
7. Brewing completes automatically - remove mug.
8. Lift handle to eject used K-Cup pod.

Tip: Preheat mug with hot water for hotter coffee.

Maintenance & Cleaning

Regular cleaning ensures optimal performance and taste.

1. Unplug brewer and allow to cool completely before cleaning.
2. Remove and wash water reservoir weekly with mild detergent.
3. Wipe exterior with damp cloth - never immerse in water.
4. Clean drip tray and mug platform regularly.
5. Remove and rinse K-Cup holder assembly monthly.
6. Descale every 3-6 months depending on water hardness.

CAUTION! Never use abrasive cleaners or scouring pads.

Descaling Procedure

Required when descaling indicator lights or every 3-6 months.

1. Fill water reservoir with 16oz white vinegar and 16oz water.
2. Place large mug (at least 20oz) on drip tray.
3. Press POWER, then press and hold 10oz and 8oz buttons for 3 seconds.
4. Press BREW button - vinegar solution will dispense in pulses.
5. When reservoir is empty, refill with fresh water only.
6. Repeat brewing process with fresh water 4-5 times to rinse.
7. Descaling complete when vinegar odor is gone.

WARNING! Use only Keurig descaling solution or white vinegar.

Regulatory Information

UL listed; complies with FCC Part 15. Copyright © Keurig Green Mountain, Inc. For support, visit www.keurig.com or contact 1-866-901-2739. This brewer is designed for household use only.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Brewer won't turn on	Power connection	Check power cord; ensure outlet works; reset if needed.
No water flow	Clogged needle/reservoir	Check water reservoir placement; clean exit needle.
Small cup of coffee	Mineral buildup	Descale brewer; check water filter if installed.
Coffee tastes bad	Old K-Cup/cleanliness	Use fresh K-Cup; clean brewer; replace water filter.
Leaking water	Loose connections	Ensure reservoir seated properly; check seals.
Descaling light on	Mineral buildup	Perform descaling procedure immediately.

Reset: Unplug for 30 seconds, then restart.

Service: 1-866-901-2739; www.keurig.com