Keurig Mini Brewer Manual

The Keurig Mini Brewer is a compact single-serve coffee maker designed for small spaces, featuring one-cup brewing, multiple cup sizes, auto-off functionality, removable drip tray, descaling mode, and simple operation with minimal buttons. Powered by 120V AC, 60Hz. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Compact brewer body, Water Reservoir, K-Cup Pod Holder, Drip Tray, Power Button, Brew Button, Cup Size Selector.

Installation

Unpack and inspect contents. Place on clean, stable surface.

1. Remove all packaging materials from brewer and components.
2. Place brewer on flat, stable surface away from edges.
3. Ensure adequate clearance around brewer for ventilation.
4. Plug into AC power outlet.

WARNING! Keep away from water sources. Do not immerse in water. Ensure proper ventilation around brewer.

First-Time Setup

Power on brewer; perform initial cleaning cycle.

1. Fill water reservoir with fresh cold water.
2. Plug in brewer and press POWER button.
3. Wait for brewer to heat up (approximately 3 minutes).
4. Run water through brewer without K-Cup pod to clean system.
5. Select preferred cup size using size selector.
6. Brew first cup with K-Cup pod.

CAUTION! Use only Keurig-approved K-Cup pods. Do not use ground coffee or loose tea.

Specifications

• Dimensions: Compact design, ideal for small spaces
• Water Reservoir: 12oz removable tank
• Brew Sizes: 6oz, 8oz, 10oz
• Brew Time: Less than 1 minute per cup
• Power: 120V AC, 60Hz, 1500W
• Auto-Off: 90 seconds after brewing completion
• Compatibility: All Keurig K-Cup pods
• Weight: Lightweight for easy portability
• Warranty: 1-year limited warranty

Controls and Settings

Simple operation with minimal controls. Front Panel: POWER button, BREW button, Cup Size Selector.

Operation: Press POWER to turn on, select cup size, insert K-Cup, press BREW to start.

Settings: Cup size selection (6oz, 8oz, 10oz), Auto-off timing (90 seconds), Descaling mode activation. Indicator lights show power status (solid green = ready, blinking = heating, off = standby).

Brewing Process

Simple one-touch brewing with K-Cup pods.

1. Lift handle to open K-Cup pod holder.
2. Insert K-Cup pod into holder.
3. Close handle firmly until it snaps into place.
4. Place mug on drip tray.
5. Select desired cup size (6oz, 8oz, or 10oz).
6. Press BREW button to start brewing.
7. Wait for brewing to complete (less than 1 minute).
8. Remove mug and enjoy your beverage.

Tip: For best results, use cold filtered water and fresh K-Cup pods.

Maintenance & Cleaning

Regular cleaning ensures optimal performance and beverage quality.

1. Daily: Wipe exterior with damp cloth.
2. Weekly: Remove and clean drip tray and K-Cup holder.
3. Monthly: Descale brewer to remove mineral deposits.
4. As needed: Clean water reservoir with mild soap and water.

CAUTION! Unplug brewer before cleaning. Do not use abrasive cleaners or immerse in water.

Descaling Procedure

Descale every 3-6 months or when mineral deposits affect performance.

1. Fill water reservoir with descaling solution or white vinegar.
2. Place large mug on drip tray.
3. Turn on brewer and start descaling mode.
4. Run solution through brewing cycle.
5. Rinse thoroughly by running clean water through 2-3 cycles.
6. Wipe all surfaces clean.

WARNING! Follow descaling instructions carefully. Rinse thoroughly to remove all cleaning solution.

Regulatory Information

UL Listed: Certified for safety standards. FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © 2025 Keurig; trademarks of Keurig Green Mountain, Inc. For support, visit www.keurig.com or contact 1-866-901-2739.

Troubleshooting

Reset: Unplug for 2 minutes, then restart.

Service: 1-866-901-2739; www.keurig.com