Keurig Mini Plus Brewer Manual

The Keurig Mini Plus Brewer is a compact single-serve coffee maker designed for personal use with K-Cup pods, featuring one-touch brewing, multiple cup sizes, auto-off functionality, removable drip tray, descaling mode, energy saving features, and compatibility with various K-Cup pod types. Powered by 120V AC, 60Hz. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Compact brewer body, Removable drip tray, K-Cup pod holder, Water reservoir, Power button, Brew size buttons, Power cord.

Installation

Unpack and inspect contents. Place on clean, stable, level surface.

1. Remove all packaging materials and stickers
2. Wash removable parts: reservoir and drip tray with warm soapy water
3. Place brewer on stable counter away from edges
4. Fill reservoir with fresh cold water
5. Plug into grounded 120V AC outlet

WARNING! Keep away from water sources. Do not immerse in water. Ensure stable surface placement.

First-Time Setup

Power on brewer; complete initial setup process.

1. Prime the system: Press power button, run water through without K-Cup pod
2. Select brew size: Choose preferred cup size (6oz, 8oz, 10oz)
3. Insert first K-Cup: Lift handle, place pod in holder, close firmly
4. Place cup: Ensure mug is centered under brew head
5. Begin brewing: Press brew button for first cycle

CAUTION! First few brews may produce weaker coffee as system primes.

Specifications

• Dimensions: 12.5" H x 5.2" W x 11.3" D
• Water Reservoir: 48oz capacity
• Brew Sizes: 6oz, 8oz, 10oz
• Power: 120V AC, 60Hz, 1470W
• Auto-off: 90 seconds after brew completion
• Weight: 5.5 lbs
• Cord Length: 30 inches
• Warranty: 1 year limited
• Compatibility: All K-Cup pod varieties

Controls and Settings

Front panel controls: Power button, Brew button, Cup size selection.

Indicator Lights: Power (blue), Heating (flashing blue), Ready (solid blue), Descale (red).

Brew Settings: Cup size selection (6oz, 8oz, 10oz), Auto-off timing (90 seconds), Energy saving mode. Maintenance: Descaling mode activation, Reservoir removal, Drip tray cleaning.

Brewing Process

Step-by-step brewing instructions for perfect coffee every time.

1. Lift handle to open K-Cup pod chamber
2. Insert K-Cup pod (any variety)
3. Close handle firmly until it clicks
4. Place mug on drip tray (max height 7.2")
5. Select desired brew size (6oz, 8oz, 10oz)
6. Press brew button - brewing begins automatically
7. Wait for cycle completion (approx 1 minute)
8. Remove mug and enjoy

Tip: For stronger coffee, use 6oz setting with dark roast pods.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

1. Daily: Wipe exterior with damp cloth
2. Weekly: Clean drip tray and reservoir
3. Monthly: Descale if indicator light appears
4. As needed: Clean needle with paper clip
5. Quarterly: Deep clean all removable parts

CAUTION! Unplug before cleaning. Never immerse brewer in water.

Descaling Procedure

Descale when indicator light appears or every 3-6 months.

1. Prepare descaling solution: Use Keurig descaling solution or vinegar/water mix
2. Fill reservoir with descaling solution
3. Place large mug (at least 16oz) on drip tray
4. Enter descale mode: Press and hold 6oz and 10oz buttons for 3 seconds
5. Run descaling cycles until reservoir is empty
6. Rinse thoroughly: Run multiple water-only cycles
7. Reset descale indicator: Unplug for 30 seconds

WARNING! Follow descaling instructions carefully to avoid damage.

Regulatory Information

UL Listed: Complies with UL 197 safety standards. FCC Part 15: Class B digital device. Energy Star: Meets energy efficiency guidelines. Copyright © 2024 Keurig Green Mountain, Inc. All rights reserved. For support, visit www.keurig.com or contact 1-866-901-2739.

Troubleshooting

Reset: Unplug for 30 seconds then restart.

Service: 1-866-901-2739; www.keurig.com