Keurig Model B40 Instruction Manual

The Keurig Model B40 is a single-serve coffee brewing system designed for home use, featuring multiple brew sizes, removable water reservoir, energy-saving auto-off function, programmable clock, descale indicator, and compatibility with all K-Cup pods. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Brewing Process 7. Maintenance & Cleaning 8. Descaling Procedure 9. Care Instructions 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Brew chamber, removable 48oz water reservoir, drip tray, control panel, power button, brew size buttons.

Feature	Description
Water Reservoir	48oz removable reservoir with handle
Brew Sizes	6oz, 8oz, 10oz cup sizes
Power Button	Main power control
Brew Buttons	6oz, 8oz, 10oz selection buttons
Add Water Indicator	LED light indicates when to refill water
Descale Indicator	Alerts when descaling is needed
Auto Off	Automatic shut-off after 2 hours
Programmable Clock	24-hour clock display
Drip Tray	Removable tray with height adjustment
K-Cup Pod Compatibility	Works with all K-Cup pod varieties

Installation & Setup

Unpack and inspect all components. Place on clean, level surface.

Remove packaging materials and protective tape.
Wash removable water reservoir with warm, soapy water and rinse thoroughly.
Place drip tray in position and ensure it's properly seated.
Fill water reservoir with fresh cold water and reinstall.
Plug power cord into grounded electrical outlet.

WARNING! Do not use without water. Ensure unit is on stable surface away from edges.

First-Time Use

Prime the brewing system before first use.

Press POWER button to turn unit on - green light will illuminate.
Wait for READY light to turn on (approximately 3 minutes).
Lift and close brew handle without inserting K-Cup pod.
Place mug on drip tray (minimum 10oz capacity).
Press 10oz brew button to run water through system.
Repeat brewing cycle 2-3 times without K-Cup pod.
System is now ready for normal use.

CAUTION! First few brews may contain manufacturing residues - discard these initial brews.

Specifications

Dimensions: 13.2" H x 10.2" W x 13.8" D
Water Reservoir: 48oz removable
Brew Sizes: 6oz, 8oz, 10oz
Power: 120V AC, 60Hz, 1470W
Auto Off: 2 hours
Weight: 8.5 lbs
Warranty: 1 year limited
Compatibility: All K-Cup pods
Water Filter: Compatible with Keurig water filter
Operating Temp: 40-95°F

Controls and Settings

Control Panel: POWER button, 6oz/8oz/10oz brew buttons, ADD WATER indicator, DESCALING indicator.

Brew Size Selection: Press corresponding button for desired cup size. Auto Off: Programmable - press and hold 6oz button for 3 seconds to disable/enable. Clock Setting: Press and hold 10oz button, use brew buttons to adjust time.

Indicator Lights: Green READY light when heated, flashing ADD WATER when reservoir empty, solid DESCALING when maintenance required.

Brewing Process

Standard brewing procedure for optimal results.

Ensure READY light is illuminated (green).
Lift brew handle and insert K-Cup pod.
Close brew handle firmly until it clicks.
Place mug on drip tray (minimum 10oz capacity).
Select desired brew size (6oz, 8oz, or 10oz).
Brewing begins automatically - cycle completes in approximately 1 minute.
Lift brew handle to eject used K-Cup pod.
Brew handle must be closed before next brew cycle.

Tip: For stronger coffee, use 6oz setting with dark roast K-Cup pod.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

Daily: Wipe exterior with damp cloth, empty drip tray
Weekly: Remove and wash water reservoir, clean drip tray
Monthly: Clean brew chamber with paper clip, run vinegar solution
As Needed: Replace water filter every 2 months
Descaling: When DESCALING light illuminates

WARNING! Unplug unit before cleaning. Never immerse in water.

Descaling Procedure

Required when DESCALING indicator light turns on.

Prepare descaling solution (Keurig descaling solution or white vinegar).
Ensure water reservoir is empty and unit is powered on.
Pour descaling solution into empty water reservoir.
Add water to fill line and replace reservoir.
Place large mug or container on drip tray (at least 20oz capacity).
Press and hold 8oz and 10oz buttons simultaneously for 3 seconds.
Press 10oz brew button to begin descaling cycle.
Repeat brewing until ADD WATER light illuminates.
Rinse reservoir thoroughly and refill with fresh water.
Run multiple brew cycles with fresh water to rinse system.

Care Instructions

Unplug before cleaning. Use only mild detergent and soft cloth.

DO: Clean exterior with damp cloth, use Keurig-approved cleaners, empty drip tray regularly. DON'T: Immerse in water, use abrasive cleaners, operate without water, use damaged K-Cup pods.

CAUTION! Hot surfaces - allow to cool before cleaning. Keep away from children.

Regulatory Information

UL Listed: Complies with UL STD 197. FCC Part 15: Class B digital device. Copyright © 2025 Keurig Green Mountain, Inc. All rights reserved. For support, visit www.keurig.com or contact 1-866-901-2739. Manufactured for Keurig Green Mountain, Inc., Waterbury, VT 05676.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit won't power on	Power connection	Check power cord; ensure outlet works; press POWER button firmly
No water flow	Empty reservoir/clog	Refill water reservoir; check for clogs; run cleaning cycle
Coffee too weak	Brew size/needles	Use smaller brew size; clean exit needle; use stronger K-Cup
Leaking water	Reservoir placement	Ensure reservoir seated properly; check seals; contact service
Descaling light on	Mineral buildup	Perform descaling procedure; use filtered water
Brew interrupted	Power/overheating	Check power stability; allow to cool 15 minutes; restart

Reset: Unplug for 2 minutes, then restart.

Service: 1-866-901-2739; www.keurig.com