Keurig Model B77 Manual

The Keurig Model B77 is a premium single-serve coffee brewer featuring programmable settings, multiple cup sizes, energy-saving auto-off functionality, removable water reservoir, descaling alert system, and compatibility with all K-Cup pods. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Removable 80oz water reservoir, LCD display, programmable settings, energy saving mode, descaling indicator, hot water on demand.

Installation & Setup

Unpack and inspect all components. Place on clean, level surface away from heat sources.

1. Remove packaging materials and stickers from brewer.
2. Wash removable water reservoir with warm, soapy water and rinse thoroughly.
3. Fill reservoir with fresh cold water and place back into brewer.
4. Plug into grounded 120V AC outlet.
5. Prime the brewing system by running water through without a K-Cup pod.

WARNING! Do not use without water in reservoir. Keep away from children and heat sources.

First-Time Use

Power on brewer; allow system to initialize.

1. Press POWER button; brewer will heat up (approx. 3 minutes).
2. When READY light illuminates, lift handle and insert K-Cup pod.
3. Close handle firmly and select desired brew size.
4. Place mug on drip tray and press BREW button.
5. For first few brews, discard initial water to clear system.

CAUTION! Hot surfaces during and after brewing. Handle with care.

Specifications

• Dimensions: 13.5" H x 10.2" W x 15.3" D
• Water Reservoir: 80oz removable capacity
• Brew Sizes: 4oz, 6oz, 8oz, 10oz, 12oz
• Power: 120V AC, 60Hz, 1470W
• Brew Time: Under 1 minute per cup
• Temperature: 192°F optimal brewing temperature
• Auto-Off: Programmable 2 hours (default)
• Weight: 9.5 lbs
• Warranty: 1 year limited warranty

Controls and Settings

Access settings via LCD display and control buttons.

Front Panel: POWER, BREW, HOT WATER, STRENGTH, CUP SIZE, AUTO OFF

Display Settings: Brew progress, descaling alert, water level, temperature status. Programmable Options: Brew strength (regular/strong), auto-off timing (off, 30min, 2hr, 4hr), cup size preferences. Maintenance Settings: Descaling mode, factory reset, water filter reminder.

Brewing Process

Simple three-step brewing process for perfect coffee every time.

1. Lift handle and insert K-Cup pod into K-Cup holder.
2. Close handle firmly until it clicks into place.
3. Place mug on drip tray (adjust height if needed).
4. Select desired cup size using CUP SIZE button.
5. Press BREW button; brewing begins immediately.
6. When brewing completes, lift handle to eject used pod.

Tip: For stronger coffee, use STRENGTH button or smaller cup size.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

1. Daily: Wipe exterior with damp cloth; empty drip tray.
2. Weekly: Remove and wash water reservoir; clean K-Cup holder.
3. Monthly: Descale brewing system (see Descaling Procedure).
4. As needed: Replace water filter every 2 months or 60 tank refills.

WARNING! Unplug brewer before cleaning. Never immerse in water.

Descaling Procedure

Descale every 3-6 months or when descale light appears.

1. Empty water reservoir and fill with descaling solution or white vinegar.
2. Place large mug (at least 16oz) on drip tray.
3. Press and hold 8oz and 10oz buttons simultaneously for 3 seconds.
4. Brew into mug until reservoir is empty.
5. Discard liquid and rinse reservoir thoroughly.
6. Refill with fresh water and repeat brewing process 3 times to rinse.

CAUTION! Use only Keurig descaling solution or white vinegar.

Regulatory Information

UL listed; complies with FCC Part 15 Class B. Copyright © 2025 Keurig; all rights reserved. For support, visit www.keurig.com or contact 1-866-901-BREW (2739).

Troubleshooting

Reset: Unplug for 2 minutes then restart.

Service: 1-866-901-BREW; www.keurig.com