Keurig Platinum Plus Owners Manual

The Keurig Platinum Plus is a premium single-serve coffee brewing system featuring programmable settings, large 80oz water reservoir, strength control, temperature control, auto on/off, descale indicator, removable drip tray, and compatibility with all K-Cup pods. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Large water reservoir, programmable LCD display, strength control, temperature control, removable drip tray, K-Cup pod holder.

Installation & Setup

Unpack and inspect contents. Place on clean, stable, level surface.

1. Remove packaging materials: Remove all tape and protective covers.
2. Fill water reservoir: Lift reservoir, fill with fresh cold water, replace securely.
3. Prime the system: Place large mug, power on, run water through without pod.
4. Plug into AC power: Use grounded 120V outlet.

WARNING! Do not use without water. Ensure brewer is on level surface to prevent spills.

First-Time Use

Power on brewer; follow initial setup procedure.

1. Prime brewing system: Run several cups of water through without pod.
2. Set clock: Use LCD display to set current time.
3. Program auto on/off: Set preferred auto on and off times.
4. Select default settings: Choose preferred brew size and temperature.
5. Brew first cup: Insert K-Cup pod and brew according to instructions.

CAUTION! First few brews may have slight plastic taste - this is normal and will dissipate.

Specifications

• Water Reservoir: 80oz removable reservoir
• Brew Sizes: 4oz, 6oz, 8oz, 10oz programmable
• Brew Time: Under 1 minute for most sizes
• Temperature Range: 187°F - 192°F adjustable
• Power: 1500 watts, 120V AC, 60Hz
• Dimensions: 13.3" H x 10.2" W x 15.1" D
• Weight: 9.5 lbs
• Compatibility: All K-Cup pod varieties
• Warranty: 1 year limited warranty

Controls and Settings

Access settings via LCD display and control buttons.

Front Panel: POWER, BREW, STRENGTH, TEMP, AUTO ON/OFF, MENU.

Brew Settings: Brew size (4oz, 6oz, 8oz, 10oz), Strength control (Strong, Medium, Light), Temperature control (187°F-192°F). System Settings: Clock, Auto on/off programming, Descaling mode, Factory reset. Display: Brew progress, Water level, Descaling alert, Clock.

Brewing Process

Simple steps for perfect brewing every time.

1. Lift handle: Open K-Cup pod holder.
2. Insert pod: Place K-Cup pod in holder.
3. Close handle: Firmly close until it clicks.
4. Place mug: Ensure mug is on drip tray.
5. Select brew size: Press desired brew size button.
6. Press BREW: Brewer will begin brewing cycle.
7. Remove pod: After brewing, lift handle to eject used pod.

Tip: For best results, use filtered water and store pods in cool, dry place.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

1. Daily: Wipe exterior with damp cloth.
2. Weekly: Clean water reservoir and removable parts.
3. Monthly: Descale if indicator light appears.
4. As needed: Clean needle and K-Cup holder area.

WARNING! Always unplug before cleaning. Never immerse brewer in water.

Descaling Procedure

Descale when indicator light appears or every 3-6 months.

1. Prepare solution: Mix Keurig descaling solution with water.
2. Enter descale mode: Hold 8oz and 10oz buttons for 3 seconds.
3. Add solution: Pour into empty reservoir.
4. Start cycle: Press BREW button without pod.
5. Rinse: Repeat with fresh water 12 times.
6. Reset: Exit descale mode when complete.

CAUTION! Use only Keurig descaling solution. Do not use vinegar.

Care Instructions

Unplug before cleaning. Use mild detergent and soft cloth only.

CAUTION! Do not use abrasive cleaners; keep away from heat sources and moisture.

Regulatory Information

UL listed; complies with FCC Part 15 Class B. Copyright © Keurig Green Mountain, Inc. For support, visit www.keurig.com or contact 1-866-901-2739. Manufactured for Keurig Green Mountain, Inc., Waterbury, VT 05676.

Troubleshooting

Reset: Unplug for 2 minutes, then restart.

Service: 1-866-901-2739; www.keurig.com