Keurig Special Edition Manual PDF

The Keurig Special Edition is a premium single-serve coffee brewing system featuring multiple cup sizes, programmable settings, removable water reservoir, descaling function, energy saving mode, and compatibility with K-Cup pods. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Brewing system, Water reservoir, Drip tray, K-Cup pod holder, Control panel, Power base.

Installation & Setup

Unpack and inspect all components. Place on clean, level surface.

1. Remove packaging materials and stickers.
2. Wash water reservoir with warm soapy water, rinse thoroughly.
3. Place empty reservoir on brewer base.
4. Plug into grounded electrical outlet.
5. Fill reservoir with fresh cold water.

WARNING! Do not use without water. Keep away from heat sources and moisture.

First-Time Use

Prime the brewing system before first use.

1. Ensure water reservoir is filled and properly seated.
2. Lift and close brewer handle without K-Cup pod.
3. Place mug on drip tray.
4. Press power button to turn on brewer.
5. Select largest cup size and press brew button.
6. Repeat process 2-3 times to prime system.

CAUTION! First few brews may contain manufacturing residues - discard.

Specifications

• Brew Sizes: 6oz, 8oz, 10oz programmable
• Water Capacity: 48oz removable reservoir
• Power: 120V AC, 60Hz, 1470W
• Brew Time: Under 1 minute
• Temperature: 192°F brewing temperature
• Auto-off: 90 seconds energy saving mode
• Compatibility: All K-Cup pod varieties
• Materials: BPA-free components
• Warranty: 1-year limited

Controls and Settings

Control Panel: Power button, Brew button, Cup size buttons (6oz, 8oz, 10oz), Add Water indicator, Descaling indicator.

Programming: Hold desired cup size button for 3 seconds to set as default. Energy Saving: Auto-off activates after 90 seconds of inactivity. Add Water: Red indicator lights when reservoir needs refilling. Descaling Alert: Flashing light indicates need for cleaning cycle.

Brewing Process

Simple steps for perfect coffee every time.

1. Lift brewer handle to open K-Cup pod chamber.
2. Insert K-Cup pod (any variety).
3. Close handle firmly until it clicks.
4. Place mug on drip tray (min 5oz capacity).
5. Select desired cup size (6oz, 8oz, 10oz).
6. Press brew button - brewing begins immediately.
7. Brewing completes automatically.
8. Remove mug and enjoy.

Tip: Preheat mug with hot water for hotter coffee.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

1. Daily: Wipe exterior with damp cloth.
2. Weekly: Remove and wash drip tray and reservoir.
3. Monthly: Clean needle that pierces K-Cup pod.
4. As needed: Descale when indicator lights.

WARNING! Unplug brewer before cleaning. Never immerse in water.

Descaling Procedure

Required every 3-6 months depending on water hardness.

1. Fill reservoir with 16oz white vinegar and 16oz water.
2. Place large mug (at least 16oz) on drip tray.
3. Press and hold 8oz and 10oz buttons simultaneously for 3 seconds.
4. Press brew button - descaling cycle begins.
5. Repeat brewing until Add Water light illuminates.
6. Rinse reservoir thoroughly and fill with fresh water.
7. Brew and discard 4-6 reservoirs of fresh water to rinse.

Care Instructions

Unplug before cleaning. Use only mild detergent and soft cloth.

CAUTION! Do not use abrasive cleaners. Keep water reservoir away from dishwasher heat. Store in dry location when not in use.

Regulatory Information

UL listed: Complies with UL STD 197. FCC Part 15: Class B digital device. Copyright © 2024 Keurig Green Mountain, Inc. All rights reserved. For support, visit www.keurig.com or contact 1-866-901-2739.

Troubleshooting

Reset: Unplug for 30 seconds then restart.

Service: 1-866-901-2739; www.keurig.com