manual for keurig b70 coffee maker

The Keurig B70 Coffee Maker is a single-serve brewing system with programmable features, multiple cup size options, removable water reservoir, auto-off functionality, descaling indicator, and compatibility with K-Cup pods. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Brewing Process 7. Maintenance & Cleaning 8. Descaling Procedure 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Brewing system, Water reservoir, LCD display, Control panel, Drip tray, K-Cup holder.

Feature	Description
Water reservoir	48oz removable reservoir with handle
LCD display	Shows time, brew settings, and alerts
Brew sizes	4 cup sizes: 6oz, 8oz, 10oz, 12oz
Programmable	Auto on/off and brew strength control
Descale indicator	Alerts when descaling is needed
Energy saving	Auto-off after 90 seconds
Brew strength	Regular and bold options
Hot water	Hot water on demand feature
K-Cup compatible	Works with all K-Cup pod varieties
Power button	Main power control

Installation

Unpack and inspect contents. Place on clean, level surface.

Remove packaging materials and stickers.
Wash water reservoir with warm, soapy water and rinse thoroughly.
Place reservoir back into coffee maker.
Plug into 120V AC power outlet.
Prime the system by running water through without a K-Cup.

WARNING! Keep away from water sources. Ensure hands are dry when handling electrical components.

First-Time Setup

Power on coffee maker; follow initial setup procedure.

Fill reservoir with fresh cold water.
Press POWER button to turn on unit.
Set time using HOUR and MINUTE buttons.
Select auto-on time if desired (optional).
Run 2-3 cycles of water through without K-Cup to prime system.
Insert K-Cup and brew first cup.

CAUTION! Use only cold, filtered water. Do not use distilled water.

Specifications

Dimensions: 13.5" H x 10.2" W x 13.2" D.
Water Reservoir: 48 oz capacity.
Power: 120V AC, 60Hz, 1470W.
Brew Sizes: 6oz, 8oz, 10oz, 12oz.
Brew Time: Under 1 minute per cup.
Weight: 8.5 lbs.
Display: LCD with backlight.
Auto-off: 90 seconds default.
Warranty: 1 year limited.

Controls and Settings

Access settings via control panel buttons and LCD display.

Control Panel: POWER, SMALL CUP, MEDIUM CUP, LARGE CUP, XL CUP, BREW STRENGTH, AUTO ON/OFF, HOT WATER.

Settings: Clock set (HOUR/MINUTE), Auto-on programming, Auto-off timing (90 sec default), Brew strength (Regular/Bold), Descaling mode, Factory reset. Display shows: Time, Brew size selection, Auto-on indicator, Descaling alert, Add water alert.

Brewing Process

Simple one-cup brewing with K-Cup pods.

Lift handle and insert K-Cup pod.
Close handle firmly until it locks.
Place mug on drip tray.
Select desired cup size (6oz, 8oz, 10oz, 12oz).
Press brew button corresponding to selected size.
Brewing begins immediately.
Remove mug when brewing completes.
Lift handle to eject used K-Cup.

Tip: For stronger coffee, use BOLD setting or smaller cup size.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Daily: Wipe exterior with damp cloth.
Weekly: Remove and wash water reservoir.
Monthly: Clean drip tray and K-Cup holder.
As needed: Descale when indicator light appears.
Replace water filter every 2 months.

CAUTION! Unplug before cleaning. Do not immerse in water.

Descaling Procedure

Required when descale indicator appears (approximately every 3-6 months).

Prepare descaling solution or white vinegar mixture.
Fill reservoir with descaling solution.
Place large container on drip tray.
Press and hold AUTO ON and 10oz buttons for 3 seconds.
Brew until reservoir is empty.
Let solution sit in machine for 30 minutes.
Rinse thoroughly with fresh water (2-3 reservoirs).
Reset descale indicator.

WARNING! Follow descaling instructions carefully to avoid damage.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord/outlet	Check power cord connection; test outlet; ensure power button is on.
No water flow	Water reservoir/priming	Refill reservoir; ensure properly seated; prime system.
Weak coffee	Brew strength/size	Select BOLD strength; use smaller cup size; check K-Cup expiration.
Machine not heating	Descaling needed	Perform descaling procedure; check power supply.
Leaking water	Seals/reservoir	Check reservoir placement; inspect seals; ensure handle closed properly.

Reset: Unplug for 2 minutes then restart.

Service: 1-866-901-2739; www.keurig.com