Manual for Keurig K-Mini K15 Coffee Maker

The Keurig K-Mini K15 is a compact single-serve coffee maker designed for small spaces, featuring one-cup brewing, multi-voltage capability (120V/240V), removable 12oz water reservoir, energy saving auto-off, descale indicator, and compatibility with all Keurig K-Cup pods. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Brewing Coffee 7. Maintenance & Cleaning 8. Descaling Process 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Compact design, Power button, Brew button, Removable water reservoir, Drip tray, K-Cup pod holder.

Feature	Description
Power button	Turns coffee maker on/off
Brew button	Starts brewing process
Removable water reservoir	12oz capacity for easy filling and cleaning
Drip tray	Removable for cleaning
K-Cup pod holder	Accepts all Keurig K-Cup pods
Descale indicator	Alerts when descaling is needed
Energy saving auto-off	Turns off 90 seconds after brew cycle
Multi-voltage capability	Works with 120V and 240V power sources
Compact design	4.5 inches wide for small spaces
Brew size options	6oz, 8oz, 10oz, 12oz

Installation

Unpack and inspect contents. Place on stable, level surface.

Remove all packaging materials from coffee maker.
Wash removable water reservoir with warm, soapy water and rinse thoroughly.
Place coffee maker on flat, stable surface near power outlet.
Fill water reservoir with fresh, cold water and reinsert into coffee maker.
Plug power cord into appropriate electrical outlet.

WARNING! Do not use hot water in reservoir. Ensure coffee maker is on stable surface to prevent tipping.

First-Time Setup

Prime the brewing system before first use.

Fill water reservoir with fresh water to maximum fill line.
Plug in coffee maker and press Power button to turn on.
Lift and close brew handle without inserting K-Cup pod.
Place mug on drip tray (minimum 10oz capacity).
Press Brew button to run water through system.
Repeat process 2-3 times to prime the system completely.
Your Keurig K-Mini is now ready for brewing.

CAUTION! Always use fresh, cold water. Never operate without water in reservoir.

Specifications

Dimensions: 4.5" W x 12.1" H x 11.3" D
Water Reservoir Capacity: 12oz removable reservoir
Brew Sizes: 6oz, 8oz, 10oz, 12oz
Power Requirements: 120V/240V, 1470W
Auto-Off: 90 seconds after brew cycle
Weight: 4.2 lbs
K-Cup Pod Compatibility: All Keurig K-Cup pods
Warranty: 1 year limited warranty
Color Options: Black, White, Red, Navy

Controls and Settings

Simple two-button operation: Power and Brew buttons.

Power Button: Turns coffee maker on/off. Blue light indicates power on.

Brew Button: Starts brewing cycle. Flashing light indicates heating/brewing in progress.

Brew Size Selection: Press and hold Brew button during brewing to select cup size (6oz, 8oz, 10oz, 12oz).

Descale Indicator: Red light alerts when descaling is required.

Energy Saving Mode: Automatically turns off 90 seconds after brewing completes.

Brewing Coffee

Simple steps for perfect single-serve coffee every time.

Press Power button to turn on coffee maker.
Wait for ready light (solid blue) - approximately 1 minute.
Lift brew handle and insert K-Cup pod.
Close brew handle firmly.
Place mug on drip tray (minimum 10oz capacity).
Press Brew button to start brewing cycle.
Brewing completes automatically based on selected cup size.
Remove mug and enjoy your coffee.

Tip: For best results, use fresh, cold water and your favorite K-Cup pods.

Maintenance & Cleaning

Regular cleaning ensures optimal performance and coffee quality.

Daily: Wipe exterior with damp cloth
Weekly: Clean water reservoir and drip tray
Monthly: Clean K-Cup pod holder assembly
As needed: Descale when indicator light appears

Cleaning Instructions: Unplug coffee maker before cleaning. Remove and wash water reservoir, drip tray, and K-Cup pod holder with warm, soapy water. Rinse thoroughly and dry before reassembling.

Descaling Process

Descale every 3-6 months or when descale indicator appears.

Empty water reservoir and fill with descaling solution or white vinegar.
Place large mug (at least 16oz) on drip tray.
Press Power button to turn on coffee maker.
Lift and close brew handle without K-Cup pod.
Press Brew button to run descaling solution through system.
Repeat until reservoir is empty.
Let solution sit in coffee maker for 30 minutes.
Rinse thoroughly by running fresh water through system 3-4 times.
Wipe exterior and reassemble all components.

WARNING! Always rinse thoroughly after descaling to remove all cleaning solution.

Regulatory Information

UL listed for household use. Complies with FCC Part 15 regulations. Manufactured for Keurig Green Mountain, Inc. This device complies with part 15 of the FCC Rules. For support, visit www.keurig.com or contact 1-866-901-2739.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Coffee maker won't turn on	Power connection	Check power cord connection; ensure outlet is working
No water flow	Clogged needle/air lock	Descale coffee maker; check for clogs in needles
Weak coffee stream	Mineral buildup	Descale immediately; use filtered water
Leaking water	Loose components	Ensure reservoir is properly seated; check seals
Descale light on	Mineral buildup	Perform descaling procedure
Brew button not working	Not ready/overheated	Wait for ready light; let cool if overheated

Reset: Unplug for 2 minutes, then restart if issues persist.

Service: 1-866-901-2739; www.keurig.com