manual for keurig k10

The Keurig K10 Mini Plus Brewing System is a compact single-serve coffee maker designed for personal use. It features one-touch brewing, auto-off functionality, removable drip tray, and compatibility with all K-Cup pods. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Brewing Process 7. Maintenance & Cleaning 8. Descaling Procedure 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Compact brewing system, Water reservoir, K-Cup pod holder, Drip tray, Power button, Brew button.

Feature	Description
Water reservoir	Removable 12-ounce capacity for easy filling
K-Cup pod holder	Accepts all K-Cup pod varieties
Drip tray	Removable for cleaning and accommodating travel mugs
Power button	Turns brewer on/off
Brew button	One-touch brewing operation
Auto-off	Automatically turns off 90 seconds after last brew
Compact design	Fits in small spaces, ideal for offices and dorm rooms
Indicator light	Shows when brewer is ready to brew

Installation

Unpack and inspect contents. Place on stable, level surface.

Remove all packaging materials from brewer and components.
Wash removable parts (water reservoir, drip tray) with warm, soapy water.
Place brewer on stable, level surface near electrical outlet.
Fill water reservoir with fresh cold water and reinsert into brewer.
Plug power cord into electrical outlet.

WARNING! Do not use brewer without water. Ensure all packaging materials are removed before first use.

First-Time Setup

Prime the brewing system before first use.

Press POWER button to turn brewer on.
Wait for indicator light to turn green (approximately 3 minutes).
Lift and close brewer handle without inserting K-Cup pod.
Place mug on drip tray and press BREW button.
Allow water to run through complete cycle.
Repeat process 2-3 times to prime system completely.

CAUTION! Use only cold, fresh water in reservoir. Do not use distilled water.

Specifications

Dimensions: 5.0" W x 9.9" H x 11.5" D
Water Reservoir Capacity: 12 ounces
Brew Sizes: 6, 8, 10 ounces
Power Requirements: 120V AC, 60Hz, 1470W
Weight: 4.5 pounds
Compatibility: All K-Cup pod varieties
Warranty: 1-year limited warranty
Auto-off: 90 seconds after last brew

Controls and Settings

Simple one-button operation with indicator lights.

Power Button: Turns brewer on and off. Red light indicates power on, green light indicates ready to brew.

Brew Button: Starts brewing cycle when pressed. Brewing process takes approximately 1 minute.

Brew Size Selection: Press and hold BREW button during brewing to adjust cup size (6, 8, or 10 ounces).

Handle Mechanism: Lift to insert K-Cup pod, close to puncture pod and seal brewing chamber.

Brewing Process

Simple steps for perfect single-serve brewing.

Press POWER button to turn brewer on.
Wait for green indicator light (approximately 3 minutes for heating).
Lift brewer handle and insert K-Cup pod.
Close handle firmly until it locks in place.
Place mug on drip tray (remove drip tray for travel mugs).
Press BREW button to start brewing cycle.
Brewing completes automatically in about 1 minute.
Remove mug and enjoy your beverage.

Tip: For best results, use fresh cold water and brew immediately after heating.

Maintenance & Cleaning

Regular cleaning ensures optimal performance and beverage quality.

Unplug brewer and allow to cool before cleaning.
Remove and wash water reservoir, drip tray, and funnel with warm, soapy water.
Wipe exterior with damp cloth; do not immerse in water.
Clean needle that punctures K-Cup pod using paper clip if clogged.
Allow all parts to dry completely before reassembling.

CAUTION! Never use abrasive cleaners or immerse brewer in water.

Descaling Procedure

Descale every 3-6 months depending on water hardness.

Fill water reservoir with 16 ounces of white vinegar or Keurig descaling solution.
Place large mug on drip tray.
Press POWER button to turn brewer on.
Lift and close handle without K-Cup pod.
Press BREW button repeatedly until reservoir is empty.
Let solution sit in brewer for 30 minutes.
Discard vinegar solution from mug.
Rinse reservoir thoroughly and fill with fresh water.
Brew and discard 12 reservoirs of clean water to rinse system.

WARNING! Always rinse thoroughly after descaling to remove vinegar taste.

Regulatory Information

UL Listed: Complies with UL STD 197. FCC Part 15: Class B digital device. Copyright © Keurig Green Mountain, Inc. For support, visit www.keurig.com or contact 1-866-901-2739. This brewer is designed for household use only.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Brewer won't turn on	Power connection	Check power cord connection; ensure outlet is working
No water flow	Clogged needle	Clean exit needle with paper clip; check for air lock
Small cup volume	Mineral buildup	Descale brewer; check water reservoir position
Leaking water	Loose connections	Ensure water reservoir is properly seated; check seals
Poor coffee taste	Old pods/cleaning	Use fresh K-Cup pods; clean brewing chamber
Indicator light flashing	Heating issue	Unplug for 1 minute, then restart; check water level

Reset: Unplug brewer for 2 minutes, then restart.

Service: 1-866-901-2739; www.keurig.com