manual for keurig k50

The Keurig K50 is a single-serve coffee brewing system designed for home use. It features multiple brew sizes, removable drip tray, descaling function, energy saving mode, and compatibility with K-Cup pods. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Water reservoir, K-Cup pod holder, drip tray, control panel, power button, brew size buttons.

Feature	Description
Water Reservoir	48 oz removable water tank
Brew Sizes	6 oz, 8 oz, 10 oz options
K-Cup Holder	Accepts all K-Cup pod varieties
Drip Tray	Removable for tall travel mugs
Power Button	Main power control
Brew Buttons	Select brew size (6oz, 8oz, 10oz)
Descale Indicator	Alerts when descaling is needed
Energy Saving	Auto-off after 90 seconds
Add Water Indicator	Alerts when water is low
Brewing Mechanism	Punctures K-Cup and brews coffee

Installation

Unpack and inspect contents. Place on stable, level surface.

1. Remove all packaging materials from brewer
2. Place brewer on clean, dry, stable surface
3. Remove water reservoir and rinse thoroughly
4. Fill reservoir with fresh cold water and replace
5. Plug into 120V AC power outlet

WARNING! Do not use without water. Keep away from heat sources and moisture.

First-Time Setup

Prime the brewing system before first use.

1. Plug in brewer - power button will illuminate
2. Press power button to turn on brewer
3. Lift and close handle without K-Cup pod
4. Place mug on drip tray
5. Press 10oz brew button to run water through system
6. Repeat process 2-3 times to prime system
7. Brewer is now ready for first K-Cup

CAUTION! First few brews may contain manufacturing residue - discard these initial brews.

Specifications

• Dimensions: 13.3" H x 10.2" W x 13.1" D
• Water Reservoir: 48 oz capacity
• Brew Sizes: 6 oz, 8 oz, 10 oz
• Power: 120V AC, 60Hz, 1470W
• Weight: 7.5 lbs
• Brew Time: Under 1 minute
• Auto-Off: 90 seconds
• Compatibility: All K-Cup pods
• Warranty: 1 year limited

Controls and Settings

Control Panel: POWER button, 6oz/8oz/10oz brew buttons, ADD WATER indicator, DESCALING indicator.

Operation: Press POWER to turn on, select brew size, lift handle, insert K-Cup, close handle, press brew button.

Settings: Energy saving mode (auto-off after 90 seconds), descaling mode activation, brew size selection. Indicators: Power on (blue light), Add water (flashing orange), Descaling needed (flashing red).

Brewing Process

Simple one-cup brewing with K-Cup pods.

1. Press POWER button - blue light illuminates
2. Lift handle to open K-Cup holder
3. Insert K-Cup pod into holder
4. Close handle firmly until it clicks
5. Place mug on drip tray
6. Select desired brew size (6oz, 8oz, 10oz)
7. Brewing begins automatically
8. Remove mug when brewing completes
9. Lift handle to eject used K-Cup

Tip: For stronger coffee, use smaller brew size with same K-Cup.

Maintenance

Regular maintenance ensures optimal performance.

1. Daily: Wipe exterior with damp cloth
2. Weekly: Clean drip tray and K-Cup holder
3. Monthly: Descale brewing system
4. As needed: Replace water filter (if equipped)
5. Quarterly: Deep clean water reservoir

WARNING! Unplug brewer before cleaning. Never immerse in water.

Descaling Procedure

Required every 3-6 months depending on water hardness.

1. Empty water reservoir
2. Mix Keurig descaling solution with water
3. Pour solution into reservoir
4. Place large mug on drip tray
5. Press and hold 8oz and 10oz buttons for 3 seconds to enter descale mode
6. Press brew button to start descaling cycle
7. Repeat brewing until reservoir is empty
8. Rinse reservoir thoroughly and refill with clean water
9. Brew several cycles with clean water to rinse system

CAUTION! Use only Keurig descaling solution. Never use vinegar.

Care & Cleaning

Unplug before cleaning. Use mild soap and water for exterior surfaces only.

Cleaning Instructions: Wipe exterior with damp cloth. Clean drip tray and K-Cup holder regularly. Never use abrasive cleaners or immerse in water.

CAUTION! Do not use harsh chemicals; keep electrical components dry.

Regulatory Information

UL listed; complies with FCC Part 15 Class B. Copyright © Keurig Green Mountain, Inc. For support, visit www.keurig.com or contact 1-866-901-2739. This appliance is for household use only.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Brewer won't turn on	Power connection	Check power cord; ensure outlet works; press power button firmly.
No water flow	Clogged needle/air lock	Descale brewer; check water reservoir placement; prime system.
Small cup of coffee	Mineral buildup	Descale system; check water reservoir level.
Coffee tastes bad	Old K-Cup/need cleaning	Use fresh K-Cup; clean brewing system; descale.
Leaking water	Loose connections	Ensure reservoir seated properly; check for cracks; contact service.

Reset: Unplug for 2 minutes then restart.

Service: 1-866-901-2739; www.keurig.com