manual for keurig single cup coffee maker

The Keurig Single Cup Coffee Maker is a compact brewing system designed for convenient single-serve coffee preparation. It features K-Cup pod compatibility, multiple brew sizes, automatic shut-off, removable drip tray, water reservoir, descaling function, and energy-saving mode. Powered by 120V AC, this coffee maker offers quick brewing times and easy maintenance. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Brew chamber, Water reservoir, Control panel, Drip tray, Power button, Cup stand.

Installation

Unpack and inspect contents. Place on clean, level surface.

1. Remove all packaging materials and stickers.
2. Wash water reservoir with warm, soapy water and rinse thoroughly.
3. Place coffee maker on stable, level countertop near power outlet.
4. Fill water reservoir with fresh cold water and reinstall.
5. Plug into AC power outlet.

WARNING! Do not use without water. Ensure coffee maker is on stable surface to prevent tipping.

First-Time Setup

Prime the brewing system before first use.

1. Plug in coffee maker and press power button.
2. Lift and close brew handle without inserting K-Cup pod.
3. Place mug on drip tray.
4. Select largest cup size and press brew button.
5. Repeat process 2-3 times with fresh water to clean system.
6. System is now ready for brewing with K-Cup pods.

CAUTION! Use only filtered or bottled water to prevent mineral buildup.

Specifications

• Dimensions: 13.5" H x 10.2" W x 13.2" D
• Water Reservoir: 48 oz removable
• Brew Sizes: 6oz, 8oz, 10oz
• Brew Time: Under 1 minute
• Power: 120V AC, 60Hz, 1470W
• Weight: 7.5 lbs
• Compatibility: All Keurig licensed K-Cup pods
• Warranty: 1 year limited
• Color: Black with silver accents

Controls and Settings

Control panel features: Power button, Brew size buttons, Add Water indicator, Descaling indicator.

Brew Sizes: 6oz (small), 8oz (medium), 10oz (large). Indicators: Add Water (flashes when reservoir is empty), Descaling (flashes when descaling is required). Auto Off: 2 hours after last brew. Brew Temperature: 192°F optimal brewing temperature.

Brewing Process

Simple 3-step brewing process.

1. Lift brew handle and insert K-Cup pod.
2. Close brew handle firmly.
3. Place mug on drip tray.
4. Select desired brew size (6oz, 8oz, or 10oz).
5. Press brew button - brewing begins immediately.
6. When brewing completes, lift handle to eject used pod.

Tip: For stronger coffee, use smaller brew size with same K-Cup pod.

Maintenance & Cleaning

Regular cleaning ensures optimal performance.

1. Unplug coffee maker before cleaning.
2. Wipe exterior with damp cloth - no harsh chemicals.
3. Remove and wash drip tray and water reservoir weekly.
4. Clean brew needle monthly with paper clip to remove coffee grounds.
5. Descale every 3-6 months depending on water hardness.

CAUTION! Never immerse coffee maker in water or other liquids.

Descaling Procedure

Required when descaling indicator flashes.

1. Empty water reservoir and fill with descaling solution or white vinegar.
2. Place large mug on drip tray.
3. Press and hold 8oz and 10oz buttons for 3 seconds to enter descale mode.
4. Press brew button to start descaling cycle.
5. Repeat brewing until reservoir is empty.
6. Rinse reservoir thoroughly and fill with fresh water.
7. Brew several cycles with fresh water to rinse system.

WARNING! Use only Keurig descaling solution or white vinegar.

Regulatory Information

UL listed; FCC Part 15 compliant. Manufactured under license from Keurig Green Mountain, Inc. For support, visit www.keurig.com or contact 1-866-901-2739. This device complies with part 15 of the FCC Rules.

Troubleshooting

Reset: Unplug for 2 minutes then restart.

Service: 1-866-901-2739; www.keurig.com